Popular
Category: Addressable fire alarm
Showing 17–32 of 78 results
-
APOLLO XP95 OPTICAL SMOKE DETECTOR 55000-600APO
₦24,500.00Add to cartThe XP95 Optical Smoke Detector uses the light scatter principle to quickly and effectively detect a range of slow burning and smouldering fires.
- Reliable fire detection in areas with a wide temperature range from -20°C to +60°C
- Ideal for escape routes
- Unaffected by wind and atmospheric pressure
- Insect resistant screen
-
APOLLO XP95 OPTICAL SMOKE DETECTOR 55000-620APO
₦24,500.00Add to cartThe XP95 Optical Smoke Detector uses the light scatter principle to quickly and effectively detect a range of slow burning and smouldering fires.
- Reliable fire detection in areas with a wide temperature range from -20°C to +60°C
- Ideal for escape routes
- Unaffected by wind and atmospheric pressure
- Insect resistant screen
-
APOLLO XPERT 7 BASE – HEATED 45681-219APO
Read moreThe base is designed to be used in cold climates where environmental conditions could result in either icing or condensation affecting the operation of detectors.
- Raises the ambient temperature of a detector chamber by approximately 10°C
- Limits the risks or potential for losses of functionality of detectors installed in cold conditions.
-
C-TEC 12V 2A EN54-4 Switch Mode PSU Part No. BF560-12
Read more- A powerful switch mode/digital hybrid PSU that can be customised* to suit your exact requirements – see More Information tab for details.
- Plastic cover on PSU PCB guards against touching live parts.
- Includes a single-pole voltfree changeover relay that switches for any fault condition.
- Multiple indicators – supply present, general fault, fault type & aux. equipment fault.
- Two selectable battery charge currents.
- Battery fault impedance limits can be optimised to suit load current (helps extend battery life)*.
- Mains fail simulation mode.
- Improved on-board temperature sensor with optional remote sensor.
- Ideal for connecting to 12V security STUs to provide BS5839-1 compliant remote monitoring facilities.
- Electronic functions comply with EN50131-6 grades 1-4 for security applications.
- BF560-12/E Encased PCB version also available.
Certified to EN54-4/A2 by the LPCB &Â VdS (AFNOR pending).
-
C-TEC 12V 2A Encased Switch Mode PSU to EN54-4/A2 Part No. BF560-12/E
Read more- A powerful switch mode/digital hybrid PSU that can be customised to suit your exact requirements – see More Information tab for details.
- Plastic cover on PSU PCB guards against touching live parts (to VDE 0100-410).
- Includes the same electronics as our BF560-12 LPCBÂ certified EN54-4/A2 boxed 12V 2A PSU.
- Metal base plate facilitates straightforward mounting inside third-party OEM enclosures.
- Includes a single-pole voltfree changeover relay that switches for any fault condition.
- Includes a fault type & hazardous voltages present LED.
- Two selectable battery charge currents.
- Battery fault impedance limits can be optimised to suit load current (helps extend battery life)*.
- Mains fail simulation mode.
- Improved on-board temperature sensor with optional remote sensor.
- Electronic functions comply with EN50131-6 grades 1-4 for security applications.
-
C-TEC 24V 1.5A EN54-4 Switch Mode PSU Part No. BF560-24
Read more- Certified to EN54-4/A2 by the LPCB and VdS (AFNOR pending).
- A powerful switch mode/digital hybrid PSU that can be customised* to suit your exact requirements – see More Information tab for details.
- Plastic cover on PSU PCB guards against touching live parts.
- Includes a single-pole voltfree changeover relay that switches for any fault condition.
- Multiple indicators – supply present, general fault, fault type & aux. equipment fault.
- Two selectable battery charge currents.
- Battery fault impedance limits can be optimised to suit load current (helps extend battery life)*.
- Mains fail simulation mode.
- Improved on-board temperature sensor with optional remote sensor.
- Electronic functions comply with EN50131-6 grades 1-4 for security applications.
- BF560-24/E caged & BF560-24/C PCB-only versions available.
-
C-TEC 24V 1.5A EN54-4 Switch Mode PSU Part No. BF562-1
Read more- Certified to EN54-4/A2 by the LPCB and VdS.
- A powerful switch mode/digital hybrid PSU that can be customised* to suit your exact requirements – see More Information tab for details.
- Plastic cover on PSU PCB guards against touching live parts.
- Includes a single-pole voltfree changeover relay that switches for any fault condition.
- Multiple indicators – supply present, general fault, fault type & aux. equipment fault.
- Two selectable battery charge currents.
- Battery fault impedance limits can be optimised to suit load current (helps extend battery life)*.
- Mains fail simulation mode.
- Improved on-board temperature sensor with optional remote sensor.
- Electronic functions comply with EN50131-6 grades 1-4 for security applications.
- BF562-1/E Encased PCBÂ version available.
-
C-TEC 24V 1.5A Encased Switch Mode PSU to EN54-4/A2 Part No. BF560-24/E
Read more- A powerful switch mode/digital hybrid PSU that can be customised to suit your exact requirements – see More Information tab for details.
- Plastic cover on PSU PCB guards against touching live parts (to VDE 0100-410).
- Includes the same electronics as our BF560-24Â LPCBÂ certified EN54-4/A2 boxed 24V 1.5A PSU.
- Metal base plate facilitates straightforward mounting inside third-party OEM enclosures.
- Includes a single-pole volt-free changeover relay that switches for any fault condition.
- Includes a fault type & hazardous voltages present LED.
- Two selectable battery charge currents.
- Battery fault impedance limits can be optimised to suit load current (helps extend battery life)*.
- Mains fail simulation mode.
- Improved on-board temperature sensor with optional remote sensor.
- Electronic functions comply with EN50131-6 grades 1-4 for security applications.
-
C-TEC 24V 3A EN54-4 Switch Mode PSU Part No. BF562-3
Read more- Certified to EN54-4/A2 by the LPCB and VdS.
- A powerful 24V 3A switch mode/digital hybrid PSU that can be customised* to suit your exact requirements – see More Information tab for details.
- Plastic cover on PSU PCB guards against touching live parts.
- Includes a single-pole voltfree changeover relay that switches for any fault condition.
- Multiple indicators – supply present, general fault, fault type & aux. equipment fault.
- Two selectable battery charge currents.
- Battery fault impedance limits can be optimised to suit load current (helps extend battery life)*.
- Mains fail simulation mode.
- Improved on-board temperature sensor with optional remote sensor.
- Electronic functions comply with EN50131-6 grades 1-4 for security applications.
- BF562-3/E encased version also available.
-
C-TEC 24V 3A Encased Switch Mode PSU to EN54-4/A2 Part No. BF562-3/E
Read more- A powerful switch mode/digital hybrid PSU that can be customised to suit your exact requirements – see More Information tab for details.
- Plastic cover on PSU PCB guards against touching live parts (to VDE 0100-410).
- Includes the same electronics as our BF562-3 LPCB/VDS certified EN54-4/A2 boxed 24V 3A PSU.
- Metal base plate facilitates straightforward mounting inside third-party OEM enclosures.
- Includes a single-pole volt-free changeover relay that switches for any fault condition.
- Includes a fault type & hazardous voltages present LED.
- Two selectable battery charge currents.
- Battery fault impedance limits can be optimised to suit load current (helps extend battery life)*.
- Mains fail simulation mode.
- Improved on-board temperature sensor with optional remote sensor.
- Electronic functions comply with EN50131-6 grades 1-4 for security applications.
-
C-TEC 24V 5A EN54-4 Switch Mode PSU Part No. BF562-5
Read more- Certified to EN54-4/A2 by the LPCB and VdS.
- A powerful 24V 5A switch mode/digital hybrid PSU that can be customised* to suit your exact requirements – see More Information tab for details.
- Plastic cover on PSU PCB guards against touching live parts.
- Includes a single-pole voltfree changeover relay that switches for any fault condition.
- Multiple indicators – supply present, general fault, fault type & aux. equipment fault.
- Two selectable battery charge currents.
- Battery fault impedance limits can be optimised to suit load current (helps extend battery life)*.
- Mains fail simulation mode.
- Improved on-board temperature sensor with optional remote sensor.
- Electronic functions comply with EN50131-6 grades 1-4 for security applications.
- BF562-5/E encased version also available.
-
C-TEC STU Mounting Plate for BF360/12 or BF560/12 12V 2A PSU Part No. BF360SP
Read more- Facilitates the mounting of a third-party Subscriber Terminal Unit (STU) in a BF360-12 or BF560/12 12V 2A PSU.
- Finished in 1.2mm steel.
- Accessory pack includes installation instructions, mounting screws, fixing pads, cable clip and cable tie.
- Can also be used with a BF360-24 or BF560-24 1.5A 24V PSU by using an ancillary BF360BOXÂ enclosure mounted alongside the PSU.
-
Gent S4-34805 Manual Call-Point with Resettable Element
₦26,000.00Add to cartEvery manual call point is continuously monitored ensuring a trigger is responded to in less than one second system wide.
The range includes options for glass and resettable elements and lift-up protective covers.
A key switch version is also available for areas where tampering or vandalism is expected.
An Environmentally Protected (EP) version with Ingress protection rating IP67 is also available, complete with resettable element, protective cover and backbox.
Manual call points for the Vigilon and Nano system are easy to install and can be mounted on standard installation back boxes or bespoke red back boxes for surface mounting.
-
Gent 34740 Parallel Bracket and Base (S4-34741-03 )
₦150,000.00Add to cartThe Gent 34740 Parallel Bracket and Base is a Parallel Bracket and Base for standard applications adjustable to + / – 15°.
Gent’s S-Quad Beam Sensors provide an enhanced solution for linear beam detection for applications where point detection is neither practical nor economical. Powered and controlled via the loop, the beam is a market-leading device with features such as ‘one man alignment and commissioning’ which is achieved using the auto gain setting, this ensures the optimum alignment is reached. Maintenance of the beam is enhanced with a key-operated test feature that simulates the beam’s obscuration in a fire. The Gent loop powered beam is certified to EN54 parts 12 and 1.
-
Gent 4 Channel Interface I/O (PCB Only) (S4-34450 )
₦95,000.00Add to cartGent 4 Channel Interface I/O (PCB Only)Â
The Gent 4 Channel Interface is a loop powered interface designed for use with the Vigilon range of fire alarm system control panels. This interface unit features 4 input / output channels that can be used to control services within a building.
Interfaces are used to link the fire alarm system to other plant management devices such as sprinklers and security systems. They can also be used to link to a zone of conventional detectors.
-
Gent COMPACT-24-N Compact Fire Panel Including Batteries and 1 Loop Card
₦660,000.00Add to cartGent COMPACT-24-N Compact Fire Panel is a one or two-loop panel accommodating up to 200 devices per loop. It can network with other Compact or Vigilon Panels. Multiple panel networks can be programmed seamlessly as one system. This allows for a flexible design and total system management. The LCD display allows a clear indication of fire or fault location, hence, site-specific fire plans can be programmed to meet the evacuation needs of the building. The Vigilon Compact panel is designed to meet the requirements of EN54-2: 1997 and EN54-4:1997.
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
