Popular
Category: Addressable fire alarm
Showing 33–48 of 78 results
-
Gent COMPACT-NC Compact Network CardÂ
₦155,000.00Add to cartThe Gent COMPACT-NC Compact Network-Card is a Compact Network Card for Vigilon Compact Control Panels.
This copper network card is used to allow data to pass between control panels in a Vigilon Compact networked fire system. The card must be plugged into the Master Control board MCB of the panel in a dedicated slot ‘CARD 2’. The card has terminals to accept external network wiring. A bank of dual-in-line switches on the card allows the setting of address number and baud rate.
-
Gent Duct Smoke-Sensor Housing (S4-34760 )
₦295,000.00Add to cartGent Duct Smoke-Sensor Housing – S4-34760 is specifically designed for use in ventilation ducting. It is mounted externally to the duct, the device uses venturi probe technology to sample the air for smoke. If smoke is detected, the device triggers the shut down of air-conditioning or ventilation systems to isolate the hazard and prevent it from spreading.
-
Gent Four-Channel Mains Switching Interface with Enclosure (S4-34404)
Read moreThe new Vigilon Mains Switching Interface units connect directly to the Vigilon system. The interface units are designed to provide heavy duty relay switching for both 24V and 230V applications with contacts rated at 13A. This interface is particularly suitable for switching damper control units and other building controls requiring a high contact rating for mains shutdown.
The range comprises of 2 versions – The new single channel interface is a direct replacement for the existing 34415 Mains Switching Interface. The 4 channel interface is a new addition to the Vigilon Interface range. Both variants offer extended functionality.
-
GENT Heat Sensor(S4-720)
₦19,000.00Add to cartGENT Heat Sensor (S4-720)
GENT Heat Sensor(S4-720) Sensors are truly intelligent analogue sensors. They combine local processing in the sensor and the panel to achieve an immediate response to real fires while minimizing the risk of false alarms. With extensively patented technology S-QUAD improves both the speed and integrity of fire detection whilst reducing false alarms. The S-Quad sensors inherit all the advantages of Vigilon’s powered loop combined with extra features. This makes Vigilon and S-Quad an industry-leading combination for fire detection and alarm signaling.
-
Gent K21SRS-01 Key Operated Manual Call Point
Read moreManual call points from Honeywell Gent are easy and safe to operate, with no hammer required. Fully compliant with EN 54-11, each point is manufactured from ABS and both have a break glass and resettable element. For areas susceptible to inadvertent operation – such as sports halls – a stronger, clear polycarbonate cover version is available.
-
Gent Key Switch Interface (Single Channel) Comes With Blue Enclosure (S4-34418)
₦170,000.00Add to cartGent Key Switch Interface (Single Channel) Comes With Blue Enclosure (S4-34418)
The Gent Key Switch Interface (S4-34418) from Gent is a Single channel Key-Switch Interface which comes with a blue enclosure.
Vigilon can accommodate a high quantity of loop-powered interface units offering fexible range of inputs and outputs from the FD&A system from plant control and signaling other systems in a fire, to linking with other emergency management systems such as sprinklers or security systems.
Loop-powered interfaces offer a cost-effective solution with each device individually addressed increasing the overall management capability of the FD&A system.
Interfaces are either powered from the loop or require a separate mains supply. The mains power version has its own battery backup.
-
Gent Light Shields S4-34741-99 for Beam Receiver (Pack of 5)
₦150,000.00Add to cartThe S4-34741-99 is a pack of Light Shields for Beam Receivers.
A light shield is only required to be fitted onto a beam receiver where direct sunlight or strong light is likely to fall in the path of the ‘beam receiver’. Where necessary fit the light shield.
Gent by Honeywell’s S-Quad Beam Sensors provides an enhanced solution for linear beam detection for applications where point detection is either not practical or economic.
Powered and controlled via the loop, the beam is a market-leading device with features such as ‘one-man alignment and commissioning’ which is achieved using the auto gain setting, this ensures the optimum alignment is reached.
Maintenance of the beam is enhanced with a key-operated test feature that simulates the obscuration of the beam in a fire. The Gent loop powered beam is certified to EN54 parts 12 and 17.
-
Gent Mains Powered 4-Channel Interface 2.0Ah – S4-34440-02
₦480,000.00Add to cartGent Mains Powered 4-Channel Interface – S4-34440-02
The Gent Mains powered 4-Channel interface units (Part No’s: S4-34440-02 and S4-34440-12) are EN54-4 compliant battery backed power supplies that can be directly connected to the Vigilon and Nano loop and also have highly flexible interfacing capability.
The 4 channels can be individually configured to provide Output and Input interface in various configuration modes, to control external equipment and receive input to allow the fire system to make decisions and take actions. It is now possible to have combined inputs and outputs giving a total of 8 external circuits connected (e.g. 4 sector outputs and 4 confirmation inputs).
The units have room to accommodate optional modules on to DIN rails. It has a configurable auxiliary power output that is derived from its self-contained mains power supply unit, which is battery backed to continue to deliver power in the event of mains supply failure.
-
Gent Mains Powered Interface 12.0Ah Standby (including Batteries)- S4-34440-12
₦1,470,000.00Add to cartThe Gent Mains powered interface 12.0Ah units (Part No’s: S4-34440-02 and S4-34440-12) are EN54-4 compliant battery-backed power supplies that can be directly connected to the Vigilon and Nano loop and also have highly flexible interfacing capability.
The 4 channels can be individually configured to provide Output and Input interfaces in various configuration modes, to control external equipment, and receive input to allow the fire system to make decisions and take actions. It is now possible to have combined inputs and outputs giving a total of 8 external circuits connected (e.g. 4 sector outputs and 4 confirmation inputs).
The units have room to accommodate optional modules onto DIN rails. It has a configurable auxiliary power output that is derived from its self-contained mains power supply unit, which is battery backed to continue to deliver power in the event of mains supply failure.
-
Gent NS-MCB Spare MCB for Nano
₦890,000.00Add to cartGent NS-MCB Spare MCB
Gent NS-MCB Spare MCB is a spare MCB for Nano.
-
Gent NS-PLATE Spare Nameplate/Screw Cover Pack of 5
Read moreGent NS-PLATE Spare Nameplate/Screw Cover Pack of 5 – Spare/replacement nameplate and screw cover for Gent NANO Control panel
-
GENT O2H – Dual Optical+Heat Multisensor White-(S4-711)
₦45,000.00Add to cartGent Dual Optical+Heat Multisensor White-(S4-711) The S4-711 is specifically designed to be used with the Gent Vigilon range of Analogue Addressable Control Panels. This setector is a Dual Optical Type Analogue Addressable Smoke Detector which is combined with a Heat Detection Element. This product requires a Gent S4-700 base for mounting. A truly intelligent analogue …
GENT O2H – Dual Optical+Heat Multisensor White-(S4-711)Read More
-
GENT Optical Heat Multi-Sensor- S4-710
₦47,000.00Add to cartGENT Optical Heat Multi-Sensor- S4-710 is specifically designed to be used with the Gent Vigilon range of Analogue Addressable Control Panels. This detector is an Optical Type Analogue Addressable Smoke Detector combined with a Heat Detection Element. It requires a Gent S4-700 base for mounting.
The S4-710 is a truly intelligent analogue sensor combining local processing in the sensor and the panel to achieve an immediate response to real fires while minimizing the risk of false alarms.
-
GENT Optical Heat-Sensor Sounder S4-770-S
₦47,000.00Add to cart- Complete range of sensors with combinations of advanced sensing technologies including heat, dual angle optical scatter and carbon monoxide (CO)
- Combined sensing of carbon monoxide with dual angle optical scatter and heat allows a higher level of false alarm immunity in presence of steam and while still maintaining the integrity of detecting fires
- Each sensor has certified sensitivity settings that suit certain environments/applications and may be programmed for different times of the day if required
- Short circuit Isolator in each device
- Configurable input/output connection for remote indicator or supervisory input fully synchronised sound patterns via the control panel
- Sensor sounders have adjustable sound level and tones to match system sounders
- Sounder element monitoring and over-load protection to ensure operation even in event of cable fault
- Sound output synchronised and compatible with S-Quad range of EN54-23 VADs
-
GENT Remote LED 13449-01(for use with common base S4-700)
₦8,000.00Add to cartThe 13449-01 is a remote LED that is used where detectors are not visible such as in ceiling voids or rooms or spaces that may not have easy access.
Used with S4-700 bases.
-
GENT S3-S-V-VAD-HPW-R 2 way Sounder/Strobe White Body Red Lens
₦49,000.00Add to cartHoneywells Sounder Beacon, designed and approved to meet both EN54-3 and EN54-23, is ideal for applications where a dual purpose audible and visual alarm device is required. A new folded horn design, high output LEDs, advanced optics and an innovative lens design, provides outstanding sound output and omni-directional light coverage at low current draw
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
