Analog fire alarm system operate by receiving signal from single cable that connects all of the detection units. The systems interact with the control panels via a single continuous line that connects all equipment. It decreases the risk of wiring problems.
This increased trustworthiness ensures that no false alarms, unnecessary evacuations, or emergency procedures disrupt business operations. When an Analog fire system’s fire alarm goes off, residents can respond appropriately and without hesitation. The single wire connection feature has a number of advantages for the maintenance and efficiency of the fire alarm system.
Adding or removing alarms throughout a facility, the singular wiring enables for smoother and faster installations. This helps to keep installation labor expenditures to a minimum.
-
Notifier Honeywell DOM 4-24 Digital Output Module (583362.22.IPMSG)
The DOM (Digital Output Module) is the central control element of VARIODYN D1. It has interfaces to all input/output assemblies, administers, and monitors the loudspeaker circuits for voice alarm systems and electro-acoustic emergency warning system per EN 60849 and EN 50849. Large or complex system configurations can be implemented through the networking of multiple DOMs via Ethernet. The DOM offers a high level of automatic and constant monitoring as standard. All connected power amplifiers are permanently monitored by the DOM and if a power amplifier becomes faulty, it can be replaced dynamically by a backup amplifier or a backup amplifier channel. The switchover is done automatically by the DOM. The loudspeaker lines are permanently monitored for short circuit, ground fault, and failure as well as impedance deviation. Faulty loudspeaker zones are separated in a non-reacting manner. A DOM contains storage capacity for preset announcements, which can be used for alarm texts and signals (escape alarm, caution signal) and warning signals (gongs). The volume of each source and each amplifier channel can be controlled. Additional filters like parametric equalizer, high-and low pass filter are available.
-
Gent by Honeywell FS24X-911-24-6: QuadBand™ IR3+ Detector (Stainless Steel)
FS24X provides wideband Multi-Spectrum Triple IR (IR/IR/IR/Visible) flame detection. It is part of our FSX family of
advanced technology Electro-Optical fire detectors. Using our patented* WideBand IR™, WideBand 4.3 micron IR™, and
Visible detection technology, the FS24X sets the standard for flame detection. Sophisticated software algorithms and dual
microprocessors ensure that the FS24X has the highest fire detection performance combined with optimal false alarm
rejection.
The WideBand IR™ Infrared technology using high-speed solid-state Quantum sensors allows detection of all types of fires,
hydrocarbon and non-hydrocarbon, in all weather conditions. -
FS20X-211-24-6: Dual IR/UV Flame Detector (Stainless Steel)
Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap
in integrating Infrared and Ultraviolet sensing technologies. The FS20X detector is a Multi-Spectrum and UV/Dual IR/VIS
and flame detector with a proven UV solar-blind sensor. FS20X delivers a faster response and fewer false alarms, performs in
a wider ambient temperature range, with a much longer detection range compared to conventional UV/IR detectors. -
Gent VIG-MIM-A3 A3 Zonal and Graphic Mimic
Why Choose the Gent VIG-MIM-A3?
✅ Clear Zone Identification – Instantly locate fire zones for quick evacuation and response.
✅ Custom Graphic Interface – Tailored floor plans and layouts for enhanced situational awareness.
✅ Seamless Integration – Fully compatible with Gent Vigilon systems.
✅ Robust and Reliable – Engineered for continuous performance in critical environments.
✅ User-Friendly Design – Easy to interpret even in high-stress scenarios.
✅ Essential for Large-Scale Fire Safety Systems – Ideal for hospitals, schools, malls, and industrial sites.🛒 Protect lives and property with smarter fire safety tools.
Order the Gent VIG-MIM-A3 today and stay a step ahead in safety.₦ 2,312,500.00₦ 2,350,000.00Gent VIG-MIM-A3 A3 Zonal and Graphic Mimic
₦ 2,312,500.00₦ 2,350,000.00 -
Gent Vigilon Plus Repeat Panel with Batteries (VIGPLUS-RPT)
🔋 Built-in battery backup means it’s always active, even during power outages.
📟 Real-time monitoring allows you to view fire system status across multiple locations.
🧠 Intelligent interface for quick alerts, fast responses, and efficient evacuations.
🔗 Fully networked with the main control panel—ideal for large or multi-zone facilities.
🔧 Easy installation and configuration, saving time and reducing setup costs.₦ 2,000,000.00₦ 2,200,000.00Gent Vigilon Plus Repeat Panel with Batteries (VIGPLUS-RPT)
₦ 2,000,000.00₦ 2,200,000.00 -
Gent Loop Powered Interfaces(VSINTM-PCB-UPG)
Vigilon’s range of loop powered interfaces offer
a comprehensive range of connectivity options
with critical plant and other safety systems.
Vigilon can accommodate a high quantity of loop powered interface units
offering fexible range of inputs and outputs from the FD&A system from
plant control and signalling other systems in a fi re, to linking with other
emergency management systems such as sprinklers or security systems.
Loop powered interfaces offer a cost effective solution with each device
individually addressed increasing the overal management capability of the
FD&A system.
Interfaces are either powered from the loop or require a separate mains
supply. The mains power version has its own battery backup. -
Gent Loop Powered Interfaces- Single Input(S4-34410)
Vigilon’s range of loop powered interfaces offer
a comprehensive range of connectivity options
with critical plant and other safety systems.
Vigilon can accommodate a high quantity of loop powered interface units
offering fexible range of inputs and outputs from the FD&A system from
plant control and signalling other systems in a fi re, to linking with other
emergency management systems such as sprinklers or security systems. -
Gent Single Channel Interfaces – Input/Otput(S4-34420)
Description
Vigilon’s range of loop powered interfaces offer
a comprehensive range of connectivity options
with critical plant and other safety systemsVigilon can accommodate a high quantity of loop powered interface units
offering fexible range of inputs and outputs from the FD&A system from
plant control and signalling other systems in a fi re, to linking with other
emergency management systems such as sprinklers or security systems.₦ 47,000.00 -
GENT INTERFACE ENCLOSURE SMALL PLASTIC SURFACE MOUNT BOX (M200E-SMB)
Description
GENT INTERFACE ENCLOSURE SMALL PLASTIC SURFACE MOUNT BOX (M200E-SMB) is a housing for Vigion’s loop powered interfaces. Vigilon’s range of loop powered interfaces offer a comprehensive range of connectivity options with critical plant and other safety systems. Vigilon can accommodate a high quantity of loop powered interface units offering fexible range of inputs and outputs from the FD&A system from plant control and signalling other systems in a fi re, to linking with other emergency management systems such as sprinklers or security systems. Loop powered interfaces offer a cost effective solution with each device individually addressed increasing the overal management capability of the FD&A system.
Interfaces are either powered from the loop or require a separate mains supply. The mains power version has its own battery backup. -
GENT INTERFACE ENCLOSURE LARGE PLASTIC(S4-34490)
Gent Interface Enclosure Large Plastic (S4-34490) is designed to house Gent S4 loop-powered interfaces.
₦ 75,000.00GENT INTERFACE ENCLOSURE LARGE PLASTIC(S4-34490)
₦ 75,000.00 -
Zeta SMART6 Multi-loop Addressable Control Panel w/ 32 Zone LED SMART6/32
DESCRIPTION
The SMART6 Multi-loop is a powerful and sophisticated
Analogue Addressable Fire Alarm Control Panel that
offers a variety of modular components which allow it to
meet a wide variety of applications.
The graphical touch screen provides a clear,
uncluttered and intuitive interface which results in the
end user requiring minimal training.
The control panel has the capability to support complex
cause and effect programming and a wide range of
user controllable functions that make the panel suitable
for a vast range of projects from multi-site commercial
developments through to industrial applications.
It can operate as part of a networked system of up to
64 panel’s peer-to-peer, or a standalone panel. It has
powerful programming options that allow configurable
control over whether messages from specific panels
are transmitted around the network or remain local.
Each system component has been specifically
designed to operate as part of a Smart Multi-loop EN54
listed system providing assurance that the detectors,
interfaces, sounders, and panel are all fully compatible
with each other and that the full range of system
functionality is supported by all devices.₦ 1,550,000.00
chat with us