Popular
Category: Analog Fire Alarm System
Showing 97–112 of 145 results
-
Gent VIG-NC-FO Fibre Optic Network Card
₦650,000.00Add to cart The VIG-NC-FO is a fibre optical network card designed for the Vigilon Network. The fibre network card allows fast message passing to the network.
The card must be plugged into the backplane of the panel or node in a dedicated slot. The fibre optic cables connect directly to sockets on the card. There are two builds of the fibre network cards for secure EN54 and BS Vigilon networks.
The VIG-NC-FO is a fibre optical network card designed for the Vigilon Network. The fibre network card allows fast message passing to the network.
The card must be plugged into the backplane of the panel or node in a dedicated slot. The fibre optic cables connect directly to sockets on the card. There are two builds of the fibre network cards for secure EN54 and BS Vigilon networks.
-
Gent VIG-NC-V3+ Network Card V3+
₦206,000.00Add to cartGent VIG-NC-V3+ Network Card V3+
This network card is used to allow messages of status and control data to pass between control panels and network (or terminal) nodes in a networked fire system. The card must be plugged into the backplane of each panel and node in a dedicated slot. When it is plugged into the slot P8 on the backplane the external cables must be connected to terminal block P10, which is also located on the backplane. The dual-in-line switches on the card are set to program the address number and baud rate.
-
Gent VIG-NPORT-100 NPORT 100 – RS232 to IP Device (Single Unit – 2 Required Per Link)
Read moreGent VIG-NPORT-100 NPORT 100 – RS232 to IP Device (Single Unit – 2 Required Per Link)
The VIG-NPORT-100 is a NPORT 100 – RS232 to IP Device.
-
Gent VIG-RPT-DOOR-SS Stainless Steel Door
₦1,000,000.00Add to cartThe Gent VIG-RPT-DOOR-SS Stainless-Steel Door is a replacement door for the Vigilon Repeater Control Panel.
-
Gent VIG-RPT-FLUSH Repeat Panel Flush Surround (In Black)
₦770,000.00Add to cartThe VIG-24-FLUSH is a Vigilon Control Panel Flush Surround. Key Features Ideal to use for the Gent Vigilon Plus VIG-24 fire alarm panels and terminal node. Simple to fit
-
Gent VIG72-UPGR – Upgrade Kit VIG72-UPGR
Read moreDescription Gent VIG72-UPGR – Upgrade Kit. This upgrade kit (VIG72-UPGR) is designed for installation in a Vigilon panel (VIG1-24). It is used to convert a VIG1-24 panel to VIG1-72 panel. The kit includes: 1 x 72Hr PSU module 2 x 21 AH Batteries 1 x Battery Enclosure
-
Gent Vigilon Call Point Resettable Element (Pack of 10) – S4-34890
Read moreGent Vigilon Call Point Resettable Element (Pack of 10) – S4-34890
The S4-34890 is a Vigilon call point resettable element.
-
Gent Vigilon Compact Plus 1-2 Loop Addressable Control Panel with 1 Loop Card (Compact-Plus )
₦1,064,500.00Add to cartThe Vigilon Plus Range of Advanced Fire
Detection Control Panels is applicable for
buildings of any size. -
Gent Vigilon Control Panel Flush Surround – VIG-24-FLUSH
Read moreGent Vigilon Control Panel Flush Surround – VIG-24-FLUSH
The VIG-24-FLUSH is a Vigilon Control Panel Flush Surround.
-
Gent Vigilon Key-Switch Call Point – S4-34807
Read moreGent Vigilon Key-Switch Call Point – S4-34807
The S4-34807 Vigilon Key Switch Manual Call Point is a key operated manual call point to be used with the Vigilon and Nano system where break glass models are prone to unauthorised activation. The call point is easy to install and can be mounted on a standard recessed single back box or bespoke red back boxes for surface mounting.
The call point is continuously monitored to ensure a trigger is responded to in less than 3 seconds system wide.
-
Gent Vigilon Plus Repeat Panel with Batteries (VIGPLUS-RPT)
₦1,088,500.00Add to cartDescription
Gent Vigilon Plus Repeater Panel with Batteries
The Vigilon Plus Repeat control panel provides full display and control of the system. Connecting to the detection loop, the repeat panel provides a cost-effective solution with minimum requirements for cabling and installation. Repeat panels are supplied complete with their own 72-hour power supply and standby batteries.
The feature-packed Vigilon analogue addressable fire detection and alarm system from Honeywell Gent offers medium to large sized building owners the latest in system flexibility and control panel aesthetics. Vigilon offers a degree of system sophistication that has not previously been available and incorporates a host of features designed to make it the simplest system to install, configure and use.
As well as providing the user with clear comprehensive information in the event of a fire, Vigilon additionally provides an entire historic log of the system’s management information. Should a system fault occur a detailed explanation is shown and the user can at any time navigate through the faults history.
-
Gent Vigilon VIG-IOC-DOM Input/Output Domain Card
₦1,315,000.00Add to cartGent Vigilon Input / Output Domain Card – VIG-IOC-DOM
The VIG-IOC-DOM is a Vigilon EN54 Input Output Domain Card for Vigilon Control Panels.
Key Features
- EN54
-
Gent Vigplus-24 1-4 Loop Addressable Fire Control Panel
₦2,220,000.00Add to cart- The control panel has a simple user interface with an LCD screen providing accurate information in an emergency
- Multiple panel networks can be programmed seamlessly as one system, allowing for flexible design and system management
- Flexible programming options are available at the panel
- All Vigilon devices connect onto the same two-core loop, separate sounder or repeater panel wiring circuits are not required
- In the event of a fire or fault, Vigilon’s analog addressable technology will provide a detailed log of events
- Extended event log using a flash memory card
-
Gent VIGPLUS-72 Vigilon Plus 1-6 Loop Control Panel with 1 Loop Card
₦2,150,000.00Add to cartDESCRIPTION
Gent VIGPLUS-72 Vigilon Plus 1-6 Loop Control Panel with 1 Loop Card
Vigilon Plus Control Panels are available in 3 sizes managing 2, 4 or 6 loops each accommodating up to 200 devices including advanced fire sensors, interfaces, call points, alarm sounders and visual alarms. The Compact Plus 2 loop panels and Vigilon Plus 4 loop panels are available with integrated 24 hour standby and the 6-loop panel has full 72 hr standby capacity.
Advanced networking options allow networking of up to 200 panels in a multi-domain structure with options of copper or optic fibre connections. Vigilon’s back-lit LCD display presents clear indication of Fire or Fault location and the control panel’s innovative 8-line x 40-character display with push-button keypad is simple to use. Fire Plans can be tailored to precisely meet site requirements. Vigilon’s software allows network areas to be sectored to evacuate or alert status or configured with pre-set delays.
Fully compatible with Honeywell Gent’s innovative S-Quad range – a combined Multi-Sensor range with speech, sounder and EN54-23 Visual Alarm devices in one intelligent unit. The Vigilon Plus Repeat control panel provides full display and control of the system. Connecting to the detection loop, the repeat panel provides a cost-effective solution with minimum requirements for cabling and installation. Repeat panels are supplied complete with their own 72-hour power supply and standby batteries.
-
Gent VIGPLUS-MCC MCC Control Card for Vigilon Plus
₦650,500.00Add to cartDESCRIPTION
Gent VIGPLUS-MCC MCC Control Card for Vigilon Plus
The VIGPLUS-MCC is a MCC Control Card designed for use with the VIGPLUS-24 & VIGPLUS-72 (EN54)
Key Features
- Comes with Micro SD flash memory card
-
Gent VS-BATT-CABLE Battery Lead Pack For VIGPLUS-72
₦280,000.00Add to cartThe VS-BATT-CABLE is a Battery Lead Pack For VIGPLUS-72.
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
