Popular
Category: Conventional Fire Alarm System
Conventional Fire Alarm System employs one or more initiating circuits linked to sensors wired in parallel. The number of such circuits used limits the information density. Best utilized for smaller applications, a conventional fire alarm remains a viable fire protection solution.
Conventional fire alarm system use zones. Multiple devices, both initiating and notification devices, make up a zone that connects to the main control panel. Conventional systems are analog in that they use electrical currents to communicate with the control panel.
Conventional system relies on individual circuits to communicate with the control panel. The panel’s ability to receive information limited by the number of devices it can support.
Showing 1–16 of 270 results
-
Adaptable Conduit Box Part No. NCP-27
Read more- A bespoke alternative to standard metal conduit boxes.
- Simplifies the installation of C-TEC manufactured fire detector bases and base sounder/VADs on ceiling tiles, solid ceilings, wooden beams, etc.
- Can be mounted directly onto a surface or in recesses behind ceiling tiles and plasterboard.
- Multiple access wiring points and lots of working space.
- Features two anti-rotation spikes.
- Easy termination of 16mm or 20mm cable glands ivia side and rear drill-out cable entry points.
-
AH-03127-BS Electronic Sounder and Beacon
Read moreGeneral This electronic sounder is designed for use with fire alarm systems, security systems and industrial signaling systems. Combined sounder and beacon provides and audio-visual warning with is suitable for places where high sound output and visual indication is required. Characteristics EN54-3 Approval Type B Sonder Beacon 32 signal tones selectable by Dip switch. …
-
AHMB-L Regular 4″ Mounting Base
Read moreCharacteristics Applies to model nos. AH-9315, AHR-871, AH-9920, and AH-0014. Major advantage of using the compatible mounting base is to avoid wasting time selecting proper detectors for various purposes and be able to install the base quickly and continuously. Afterwards, just plug-in proper detector head to complete the project. AHMB Regular 4″ Mounting Base Model …
-
AHMB-L Regular 6″ Mounting Base
Read moreCharacteristics Applies to model nos. AH-9315, AHR-871, AH-9920, and AH-0014. Major advantage of using the compatible mounting base is to avoid wasting time selecting proper detectors for various purposes and be able to install the base quickly and continuously. Afterwards, just plug-in proper detector head to complete the project. AHMB Regular 4″ Mounting Base Model …
-
AlarmSense High Temperature Heat Detector
Read more- Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
- Housed in a pure white polycarbonate moulding.
- Fitted with two alarm LEDs to allow 360º visibility.
-
AlarmSense Integrating Optical Smoke Detector
Read moreAlarmSense Integrating Optical Smoke Detector Part No. 55000-391APO An integrating optical smoke detector. Responds well to slow-burning, smouldering fires. Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels. Housed in a pure white polycarbonate moulding. Fitted with two alarm LEDs to allow 360º visibility. Third-party certified to EN54-7 by UL International …
-
AlarmSense Optical Smoke Detector
Read moreAlarmSense Optical Smoke Detector Part No. 55000-390APO A high quality optical detector. Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels. Housed in a pure white polycarbonate moulding. Fitted with two alarm LEDs to allow 360º visibility. Third-party certified to EN54-7 by UL International (UK) Limited. 9-33V DC operating voltage. Requires …
-
AlarmSense Standard Rate of Rise Heat Detector
Read more- An integrating optical smoke detector.
- Responds well to slow-burning, smouldering fires.
- Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
- Housed in a pure white polycarbonate moulding.
-
APOLLO AlarmSense Base Sounder Part No. 45681-510APO
Read more- Will accept any AlarmSense fire detector to provide fire detection and an audible alarm warning signal at the same point.
- 70d-87dB(A) sound output.
- Certified to EN54-3Â by UL International (UK) Limited.
- Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
- AlarmSense priority/non priority signal recognition
- Detects the removal of a detector head and reports a fault
- Continues to work during unauthorised removal of detector.
- High and low volume ranges
- Red and white caps available for stand-alone use.
- Can also be purchased as part of a detector/sounder base combination (see Combination AlarmSense Devices section below).
-
APOLLO AlarmSense Base Sounder/Visual Indicator Part No. 45681-509APO
Read more- Will accept any AlarmSense fire detector to provide fire detection and an audible AND visual alarm warning signal at the same point.
- 70d-87dB(A) sound output (visual indicator activates with sounder).
- Certified to EN54-3Â by UL International (UK) Limited.
- Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
- AlarmSense priority/non priority signal recognition
- Detects the removal of a detector head and reports a fault
- Continues to work during unauthorised removal of detector.
- High and low volume ranges.
- Red and white caps available for stand-alone use.
- Can also be purchased as part of a detector/sounder visual indicator base combination (see Combination AlarmSense Devices section below).
-
APOLLO AlarmSense Detector Base
Read moreAlarmSense Detector Base Part No. 45681-244APO Compatible with all AlarmSense fire detectors. Includes on-board ‘removAlert’ circuitry that detects the removal of an AlarmSense detector and reports a fault back to the control panel. Continues to work during the unauthorised removal of detectors. Quick and simple installation. Less than 3µA quiescent current with detector fitted. The 45681-244APO is NOT required …
-
APOLLO AlarmSense Manual Call Point, surface
Read more- Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
-
APOLLO AlarmSense Open Area Sounder IP65
Read more- A powerful wall-mounting open-area Sounder/Visual Indicator suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
- IP65 rated.
- Up to 99dB(A) sound output at 1m.
- Ultra-bright red LED.
- Device locking facility.
- Max. five Open-Area Alarm Devices per AlarmSense zone.
-
APOLLO AlarmSense Open Area Sounder/Visual Indicator
Read more- A powerful wall-mounting open-area Sounder/Visual Indicator suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
- IP65 rated.
- Up to 99dB(A) sound output at 1m.
- Ultra-bright red LED.
- Device locking facility.
- Max. five Open-Area Alarm Devices per AlarmSense zone.
-
APOLLO AlarmSense Relay Module Part No. 55000-835APO
Read more- Allows devices such as vibrating pillow alarms or vibrating radio/paging devices to be connected to an AlarmSense system.
- Can also be used to monitor and switch conventional sounders and visual indicators.
-
APOLLO DISCOVERY MANUAL CALL POINT – OUTDOOR – YELLOW – ISOLATING 58100-953APO
Read moreThe Manual Call Point is used to control extinguishant release rather than to initiate an alarm signal on the fire detection system.
- Suitable for weatherproof applications
- Reports an alarm in under 0.2 seconds
- ‘Plug and Play’ terminal connections for faster wiring
- Continuity link for wiring test before commissioning
- XP95 & Discovery compatible
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
