Popular
Category: Conventional Fire Alarm System
Showing 145–160 of 270 results
-
Gent S4 Heat Sensor Voice Sounder High Power Red VAD – S4-720-V-VAD-HPR
₦69,000.00Add to cartGent S4 Heat Sensor Voice Sounder High Power Red VAD – S4-720-V-VAD-HPR
The S-Quad range of multifunction devices includes sensors with sounder, speech and EN54-23 certified visual alarms. This allows the maximum flexibility for designers providing cover for a building. The advanced sensing technology is enhanced with a device that can alert building occupants with a highly visible visual alarm and a recorded voice message to ensure all occupants are alerted to an emergency.
-
Gent S4 Heat Sensor Voice Sounder High Power White VAD – S4-720-V-VAD-HPW
₦76,000.00Add to cartGent S4 Heat Sensor Voice Sounder High Power White VAD – S4-720-V-VAD-HPW
The S-Quad range of multifunction devices includes sensors with sounder, speech and EN54-23 certified visual alarms. This allows the maximum flexibility for designers providing cover for a building. The advanced sensing technology is enhanced with a device that can alert building occupants with a highly visible visual alarm and a recorded voice message to ensure all occupants are alerted to an emergency.
-
Gent S4-34741 Beam Sensor Transmitter
₦270,000.00Add to cartGent S4-34741 Beam Sensor Transmitter
The S4-34741 from Gent is a Beam Sensor Emitter.
Vigilon’s loop-powered technology allows up to 16 beam pairs to be connected to the same loop circuit, each covering a distance of up to 100m without the need for an external Power Supply Unit, wiring, or interfacing.
-
Gent S4-34760-15 1.5m Venturi Tube
₦190,000.00Add to cartGent S4-34760-15 1.5m Venturi Tube
The S4-34760-15 is a Venturi Tube designed for use with Duct Smoke Sensors.
-
Gent S4-34760-99 S-Quad Duct Mounting Bracket
₦196,500.00Add to cartGent S4-34760-99 S-Quad Duct Mounting Bracket The S4-34760-99 is a Mounting Bracket designed for the S-Quad Duct Smoke Sensor.
-
Gent Standard Detector Base Without Diode (805590)
₦3,000.00Add to cartDESCRIPTION Gent Standard Detector Base Without Diode is designed for use with the range of Gent ES conventional detectors. The new ES Detect range (S Quad conventional) has been developed to operate with the Xenex panel. The ES Detect range replaces the Vision 20/20 range. The ES Detect automatic detector is a non-addressable detector specifically …
-
Gent Surface MCP (XENS-805) 470 Ohms Re-settable
₦10,000.00Add to cartGent XENS-805 Surface MCP 470 Ohms Re-settable Gent Surface MCP (XENS-805) 470 Ohms Re-settable requires no hammer and is easy and safe to operate. Gent’s conventional manual call points are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red colour and are …
-
Gent Xenex 13270-08LB 8 Zone Conventional Fire Alarm Panel
₦184,500.00Add to cartThe Gent Xenex 13270-08LB fire alarm panel is a highly cost-effective conventional option for building premises requiring coverage to four zones.
With eight alarm sounder circuits, repeater panel output, remote evacuation control and one-man test and commissioning, Xenex by Gent is a leader in conventional panel technology.
-
Gent Xenex 13271-08LB 8 Zone Conventional Repeater Panel
₦172,000.00Add to cartThe Gent Xenex 13271-08LB repeater panel is for use with the Xenex range of control panels. Compatible with the 2,4 or 8 zone Xenex panel the repeater offers full system control and indication from a remote location within the building.
-
Gent Xenex 2 Zone Conventional Fire Alarm Panel
₦165,000.00Add to cartFEATURES
-
- Gent Xenex 13270-02LB
- 2 sounder circuits
- 1A sounder circuit max load
- Conforms to EN54: parts 2 & 4
- On-board relay
- Fire and fault relay expansion card optional
- Easy configuration
- Class change input
-
-
Gent Xenex Spares Accessories Pack
Read moreThe XENS-SPARE Gent Xenex Fire Alarm Panel spares pack is ideal for spare components for the Gent Xenex range of conventional fire alarm panels. This pack includes detection circuit end of line capacitors (including labels), sounder circuit resistors, a battery connection link, shorting link, mounting screws and fuses (250V 500mA, T3.15AL, F5AL)
-
Gent XENS-829 Weatherproof Manual Call Point 470 Ohms Resistor Glass
Read moreGent XENS-829 Weatherproof Manual Call Point 470 Ohms Resistor Glass
Gent’s range of conventional manual call points are designed to provide a manual alarm interface to conventional fi re alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.
-
Gent XENS-FLAP Replacement Mouldings and Cover Plates
Read moreGent XENS-FLAP Replacement Mouldings and Cover Plates The XENS-FLAP is a set of replacement plastic front panel flaps and metal battery cover plates for the Gent Xenex range of conventional fire alarm control panels.
-
Gent XENS-MCB-2 Replacement PCB Assembly
Read moreThe Gent XENS-MCB-2 is a spare / replacement PCB assembly for use with the Gent Xenex 2 Zone Fire Alarm Control Panel. This board is an ideal replacement part for damaged or faulty Xenex panel main circuit boards
-
Gent XENS-MCB-4 Replacement PCB Assembly
Read moreThe Gent XENS-MCB-4 is a spare / replacement PCB assembly for use with the Gent Xenex 4 Zone Fire Alarm Control Panel. This board is an ideal replacement part for damaged or faulty Xenex panel main circuit boards
-
Gent XENS-MCB-8 Replacement PCB Assembly
Read moreThe Gent XENS-MCB-8 is a spare / replacement PCB assembly for use with the Gent Xenex 8 Zone Fire Alarm Control Panel. This board is an ideal replacement part for damaged or faulty Xenex panel main circuit boards
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
