Conventional Fire Alarm System employs one or more initiating circuits linked to sensors wired in parallel. The number of such circuits used limits the information density. Best utilized for smaller applications, a conventional fire alarm remains a viable fire protection solution.
Conventional fire alarm system use zones. Multiple devices, both initiating and notification devices, make up a zone that connects to the main control panel. Conventional systems are analog in that they use electrical currents to communicate with the control panel.
Conventional system relies on individual circuits to communicate with the control panel. The panel’s ability to receive information limited by the number of devices it can support.
-
C-TEC Economy Status Unit Part No. EP211
-
-
-
Designed to connect to the EP203 Automatic Extinguisher Panel to provide remote system status indication via three LEDs.
-
Includes a mode (auto/manual) keyswitch.
-
Mounts on a standard UK single gang 25mm flush or surface back box.
-
Max. 8 economy status units per EP203 panel.
-
-
₦ 156,000.00₦ 159,000.00Buy nowC-TEC Economy Status Unit Part No. EP211
₦ 156,000.00₦ 159,000.00 -
-
C-TEC Manual ‘No Break’ Call Point, surface Part No. BF370S
-
- Certified to EN54 Parts 11 (LPCB)Â and 13 (BSI).
- Smooth-action resettable element mimics the feel of breaking glass.
- Supplied with a red back box, reset key and ‘Not in Use’ label.
- Red LED ‘alarm ring’ illuminates call point face upon activation.
- Photoluminescent operating window remains visible for up to 5 minutes.
- Note an additional BF370SFP red flush mounting plate is required if you wish to flush mount the BF370S.
- IP66 weatherproof version (order code BF370S/W) also available.
₦ 5,500.00Buy now -
-
C-TEC Manual ‘Crack Glass/No Break’ Call Point, flush/surface Part No. BF370FR
- Certified to EN54 Parts 11 (LPCB)Â and 13 (BSI).
- ‘Universal’ design combines multiple functions into one product, simplifying selection and reducing stock variants.
- Supplied with a glass AND plastic element, a 470Ω AND 680Ω resistor and a red surface mounting back box which can be optionally discarded if flush mounting.
- Quick visible alarm indication.
- Changeover contacts.
- IP24 rated.
-
C-TEC Manual ‘Crack Glass’ Call Point, surface Part No. BF370R
- Certified to EN54 Part 11 (LPCB/VdS).
- Unique ‘Plug & Play’ installation concept.
- Supplied with a non-breaking plastic resettable element.
- Includes a 470Ω resistor, test key and red back box.
- Anti-Tamper facility.
- Flush version (without a red back box) also available (order code BF370MFR).
-
C-TEC STI Euro Call Point Stopper, Flush Mount Multi Kit with Sounder Part No. STI-15020ML
-
- Protective cover for flush mounted manual call points.
- Helps prevent malicious activation by emitting a piercing 96dB alarm tone when its hinged cover is lifted.
- Comprises a clear, tamper proof cover and frame that retrofits over all known break glass call points.
- Ideal for schools, colleges, hospitals and other areas where there is a threat of false activation.
- Kit includes one Euro Stopper frame, two coloured housing shells (red & green), one break seal and two label sheets in 13 languages.
- Surface and non-sounder variants also available (see variants tab below).
- Main picture shows Euro Stopper with a Manual Call Point. The call point is NOT supplied.
-
-
C-TEC STI Universal Call Point Stopper, Flush Mount with Sounder Part No. STI-13020FR
- IP56 rated protective cover for flush mounted manual call points.
- Suitable for indoor and outdoor use.
- Helps prevent malicious activation by emitting a piercing 96dB alarm tone when its hinged cover is lifted.
- Comprises a clear, tamper proof cover and frame that retrofits over all known break glass call points.
- Ideal for schools, colleges, hospitals and other areas where there is a threat of false activation.
- Kit includes one Universal Stopper frame, a red header labelled ‘IN CASE OF FIRE – LIFT BREAK GLASS’ and one break seal.
- Surface and non-sounder variants also available (see variants tab below).
- Main picture shows Universal Stopper with a Manual Call Point. The call point is NOT supplied.
-
C-TEC Manual ‘No Break’ Call Point, surface Part No. BF370MR
- Certified to EN54 Part 11 (LPCB/VdS).
- Unique ‘Plug & Play’ installation concept.
- Supplied with a non-breaking plastic resettable element.
- Includes a 470Ω resistor, test key and red back box.
- Anti-Tamper facility.
- Flush version (without a red back box) also available (order code BF370MFR).
-
C-TEC Manual IP67 ‘Crack Glass’ Call Point, surface Part No. BF370/W
- Certified to EN54 Part 11 (LPCB/VdS).
- Weather resistant and sealed to IP67.
- Ideal for use in external environments where water and dirt are likely to be present.
- Unique ‘Plug & Play’ installation concept.
- Supplied with a glass element.
- Includes a 470Ω resistor and test key.
- Anti-Tamper facility.
- Wide -25ºC to +70ºC operating range.
-
C-TEC STI Call Point Stopper, Flush Mount Part No. STI-6930
- Protective cover for flush mounted manual call points.
- Helps prevent accidental or malicious call point activation.
- Comprises a clear, tamper proof call point cover c/w red header labelled ‘IN CASE OF FIRE LIFT COVER – BREAK GLASS’.
- Surface version (ST-6931) and green versions also available (see variants tab below).
- Main picture shows Call Point Stopper with a Manual Call Point. The call point is NOT supplied.
-
C-TEC Yellow Extinguishant Release Call Point, Surface Part No. BF372
-
-
-
-
- Certified to EN54 Part 11 (LPCB/VdS).
- Ideal for use with C-TEC’s EP203 Automatic Extinguisher Panel.
- Supplied with a transparent hinged cover to prevent accidental operation.
- Includes a frangible glass element, test key and yellow back box (back box can be discarded for optional flush mounting).
- ‘Plug & Play’ installation concept.
- Labelled ‘Extinguishant Release’.
-
-
-
-
-
C-TEC Single Gang Surface Interface Plate, shallow (20mm) Part No. NCP-23
-
-
-
- Allows standard UK single gang plated products to be fixed to most European style back boxes (square and round variants).
- Adapts to most European fixing centres – see video for further details.
- Multiple variants available – options include single gang shallow (NCP23), single gang deep (NCP24), double gang shallow (NCP25) and double gang deep (NCP26).
- Designed to match C-TEC’s existing plastics and colours.
- Tough and durable.
- Can also be surface mounted directly to a wall.
-
-
-
-
C-TEC Single Gang Surface Interface Plate, deep (25mm) Part No. NCP-24
- Allows standard UK single gang plated products to be fixed to most European style back boxes (square and round variants).
- Adapts to most European fixing centres – see video for further details.
- Multiple variants available – options include single gang shallow (NCP23), single gang deep (NCP24), double gang shallow (NCP25) and double gang deep (NCP26).
- Designed to match C-TEC’s existing plastics and colours.
- Tough and durable.
- Can also be surface mounted directly to a wall.
