Popular
Category: Fire Alarm System
Showing 177–192 of 564 results
-
Gent 2.8M Venturi Tube for Duct Housing (S4-34760-28)
Read moreThe S4-34760-28 from Gent is a 2.8 Venturi Tube for use with Duct Smoke Sensors. This device shall employ a molded plastic housing with a clear viewing window and metal probes (Gent 2.8M Venturi Tube) to pick up smoke in ventilation ducts. The housing shall provide a smoke entry test point and an airflow indication. Depending on the risk and sensitivity levels required, the sensor to be fitted shall be selected from the full range of sensors available and not factory fitted. This unit is particularly suitable for sensing smoke particles in ducting which is likely to be in large quantity and flowing fairly quickly.
-
Gent 34701Series T Breaker(34701)
₦70,000.00Add to cartGent 34701 34000 Series T Breaker
The 34701 T-Breaker Unit allows a spur to be created from a Gent analogue addressable loop circuit.
-
Gent 34740 Angle Bracket and Base (S4-34741-01)
₦150,000.00Add to cartThe Gent 34740 Angle Bracket and Base is designed for use in areas where the S4-34740 beam detector will not be installed on a vertical surface, or where the beam path is not perpendicular to the installation surface. It is supplied with a pre-installed S-Quad base.
Gent’s S-Quad Beam Sensors provide an enhanced solution for linear beam detection for applications where point detection is neither practical nor economical. Powered and controlled via the loop, the beam is a market-leading device with features such as ‘one man alignment and commissioning, which is achieved using the auto gain setting. This ensures the optimum alignment is reached. Maintenance of the beam is enhanced with a key-operated test feature that simulates the beam’s obscuration in a fire. The Gent loop powered beam is certified to EN54 parts 12 and 1.
Key Features
-
Gent 34740 Parallel Bracket and Base (S4-34741-03 )
₦150,000.00Add to cartThe Gent 34740 Parallel Bracket and Base is a Parallel Bracket and Base for standard applications adjustable to + / – 15°.
Gent’s S-Quad Beam Sensors provide an enhanced solution for linear beam detection for applications where point detection is neither practical nor economical. Powered and controlled via the loop, the beam is a market-leading device with features such as ‘one man alignment and commissioning’ which is achieved using the auto gain setting, this ensures the optimum alignment is reached. Maintenance of the beam is enhanced with a key-operated test feature that simulates the beam’s obscuration in a fire. The Gent loop powered beam is certified to EN54 parts 12 and 1.
-
Gent 4 Channel Interface I/O (PCB Only) (S4-34450 )
₦95,000.00Add to cartGent 4 Channel Interface I/O (PCB Only)
The Gent 4 Channel Interface is a loop powered interface designed for use with the Vigilon range of fire alarm system control panels. This interface unit features 4 input / output channels that can be used to control services within a building.
Interfaces are used to link the fire alarm system to other plant management devices such as sprinklers and security systems. They can also be used to link to a zone of conventional detectors.
-
Gent 4 ZONE CONVENTIONAL PANEL, EN54 LESS BATTERIES (13270-04LB)
₦235,500.00Add to cartDESCRIPTION
Gent 13270-04LB 4 Zone Conventional Xenex Fire Panel
BSI approved to EN54: Parts 2 & 4, the Xenex control panel can be used on installations meeting BS 5839:Part1. Control panel options for 2-8 zones can be specified.
Designed to simplify system installation, each Xenex panel contains an integral power supply and battery support to drive up to 8 alarm sounder circuits, 2 auxiliary relay contacts, a zone disablement facility and also one-man test and commissioning features.
-
Gent 4″ trim ring and snap-in mounting clips for IQ8Quad detector base (805574)
Read moreSnap-in mounting clips and trim ring for base installation, e.g. for installation on 4” electrical boxes.
Take note, the label plate -
Gent 74430-88NM 6 inch Fire Red Ball Sounder 24v Dc
₦67,000.00Add to cart- Designed with a modern feel
- Has a loud ring output
- There’s an option of a weatherproof kit
- All parts clip together to assemble
-
Gent 781814 Conventional Remote LED
Read moreGent 781814 Conventional Remote LED Manufactured by Gent, the Conventional Remote LED 781814 is part of the new ES detect range and has been developed to work in conjunction with any Xenex Panels Red prism is continuously or pulsed illuminated by 3 LEDs. Connection by 2-wire cable to detector base. Key Features 3 continuously or …
-
GENT 8 ZONE REPEAT INDICATOR, LESS BATTERIES (13271-08LB)
₦255,000.00Add to cartGent 13271-08LB 8 Zone Xenex Conventional Fire Alarm Repeat Panel EN54 (Less Batteries)
BSI approved to EN54: Parts 2 & 4, the Xenex control panel can be used on installations meeting BS 5839:Part1. Control panel options for 2-8 zones can be specified.
Designed to simplify system installation, each Xenex panel contains an integral power supply and battery support to drive up to 8 alarm sounder circuits, 2 auxiliary relay contacts, a zone disablement facility and also one-man test and commissioning features.
Utilising LPCB approved conventional smoke or heat detectors, Xenex offers exceptional value for money.
-
Gent 805580 S-Quad Removal Tool Kit
₦158,000.00Add to cartGent 805580 S-Quad Removal Tool Kit
The 805580 from Gent is a head removal tool designed for use with the Gent S-Quad range of detector.
-
Gent 805589 S-Quad Sensor Dust Cover
Read moreGent 805589 S-Quad Sensor Dust Cover (Pack of 50)
The Gent 805589 is a detector dust cover pack which is used with the S-Quad range of analogue addressable sensors.
These covers help prevent the detectors from being contaminated with dust during building works or prior to commissioning.
-
Gent BACnet Gateway Assembly for Vigilon Plus & Compact Plus with Controls & Command Builds (VIG-BNG-RW)
₦825,000.00Add to cartGent BACnet Gateway Assembly for Vigilon Plus & Compact Plus with Controls & Command Builds
The BACnet protocol is a Standard (Ansi/Ashrae 135-2004). With the Gent BACnet Gateway Assembly, devices on Vigilon fire alarm control panels are represented as BACnet objects to the BACnet client. The user subscribes to Event Notification objects from the FACP as required and the BACnet device receives events from objects on the FACP as a result of the subscription.
-
Gent Bacnet Gateway Din Rail Mounting Kit for Mains Powered Interfaces S4-344402/12 (VIG-BNG-DINKIT)
₦450,000.00Add to cartGent VIG-BNG-DINKIT Bacnet Gateway Din Rail Mounting Kit for Mains Powered Interfaces S4-344402/12
The BACNET-GW-3 provides an interface between NOTIFIER’s fire panel network (either the standard or the high-speed version) and a network using the BACnet/IP communication protocol.
BACnet protocol is an American National Standard (ANSI/ASHRAE 135-1995). With the Gateway inter- face, devices on NFN fire alarm control panels are represented as BACnet objects to the BACnet client.
-
GENT Base – Common for all S-Quad Sensors (with remote LED output)
Read moreBase – Common for all S-Quad Sensors (with remote LED output)
-
Gent Beam Sensors Pair (Transmitter And Receiver), Excluding Bracket and Base (S4-34740)
₦580,000.00Add to cartGent S4-34740 Addressable Beam Sensor Pair
Gent S4-34740 S-Quad Addressable Loop Powered Beam Sensors Pair provides an enhanced solution for linear beam detection for applications where point detection is either not practical or economic.
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
