Gent Fire Alarm Vigilon Main Control Card EN54 Zonal Display VIG-MCC-EN

You may also like…

• 

  wishlist

  Gent Fire Alarm Vigilon Plus 1-4 Loop Fire Alarm Addressable Control Panel C/W1 Loop Card

  ₦3,100,000.00 ₦3,040,000.00

  DESCRIPTION

  Gent VIGPLUS-24-NP Vigilon Plus 1-4 Loop Control Panel & 1 Loop Card 

  Vigilon Plus Control Panels are available in 3 sizes managing 2, 4 or 6 loops each accommodating up to 200 devices including advanced fire sensors, interfaces, call points, alarm sounders and visual alarms. The Compact Plus 2 loop panels and Vigilon Plus 4 loop panels are available with integrated 24 hour standby and the 6-loop panel has full 72 hr standby capacity.

  Advanced networking options allow networking of up to 200 panels in a multi-domain structure with options of copper or optic fibre connections. Vigilon’s back-lit LCD display presents clear indication of Fire or Fault location and the control panel’s innovative 8-line x 40-character display with push-button keypad is simple to use. Fire Plans can be tailored to precisely meet site requirements. Vigilon’s software allows network areas to be sectored to evacuate or alert status or configured with pre-set delays.

  Add to cart
• 

  wishlist

  Gent Fire Alarm Vigilon Loop Card (EN54) VIG-LPC-EN

  ₦220,000.00 ₦219,500.00

  Gent VIG-LPC-EN Vigilon Loop Card (EN54)

  The VIG-LPC-EN is an additional Loop Card for Gent Vigilon Panels.

  The new Loop Card is designed to fully comply with EN54-23 and is available on EN54 versions of the Vigilon range of panels. The increased power allows for up to 100 EN54-23 sensor-sounder-strobes on a 2km loop, managing up to 200 devices in total.

  Add to cart
• 

  wishlist

  Gent Fire Alarm Network Card V3+ VIG-NC-V3+

  ₦275,500.00 ₦255,500.00

  Gent VIG-NC-V3+ Network Card V3+

  This network card is used to allow messages of status and control data to pass between control panels and network (or terminal) nodes in a networked fire system. The card must be plugged into the backplane of each panel and node in a dedicated slot. When it is plugged into the slot P8 on the backplane the external cables must be connected to terminal block P10, which is also located on the backplane. The dual-in-line switches on the card are set to program the address number and baud rate.

  Add to cart
• 

  wishlist

  Out of Stock

  Gent Fire Alarm Compact-Plus Vigilon Compact Plus 1-2 Loop Addressable Control Panel with 1 Loop Card

  The Vigilon Plus Range of Advanced Fire
  Detection Control Panels is applicable for
  buildings of any size.

  Read more