A fire alarm system notifies us of an emergency, to take action to protect ourselves, our employees, and the general public.
Fire detection systems identify fire early when there is still enough time for inhabitants to safely evacuate. Control actions begin while the fire is still minor, early detection helps to reduce property loss and operational disruption. Fire alarm systems transmit information about the location of the fire to emergency responders, speeding up the firefighting procedure.
Sounders go off to warn those within the building that there may be a fire. The fire alarm system could include a remote signal system. It would then notify the fire department via a central station.
-
Gent Key Switch Interface (Single Channel) Comes With Blue Enclosure (S4-34418)
Gent Key Switch Interface (Single Channel) Comes With Blue Enclosure (S4-34418)
The Gent Key Switch Interface (S4-34418) from Gent is a Single channel Key-Switch Interface which comes with a blue enclosure.
Vigilon can accommodate a high quantity of loop-powered interface units offering fexible range of inputs and outputs from the FD&A system from plant control and signaling other systems in a fire, to linking with other emergency management systems such as sprinklers or security systems.
Loop-powered interfaces offer a cost-effective solution with each device individually addressed increasing the overall management capability of the FD&A system.
Interfaces are either powered from the loop or require a separate mains supply. The mains power version has its own battery backup.
₦ 170,000.00Buy now -
Gent Xenex 13271-08LB 8 Zone Conventional Repeater Panel
The Gent Xenex 13271-08LB repeater panel is for use with the Xenex range of control panels. Compatible with the 2,4 or 8 zone Xenex panel the repeater offers full system control and indication from a remote location within the building.
₦ 172,000.00Buy now -
GENT VCS-ODOOR-PLUS – REPLACEMENT OUTER DOOR FOR VIGPLUS-24/72 (BLACK)
The Gent VCS-ODOOR-PLUS is a spare / replacement black outer door assembly for use with the Gent Vigilon Compact Plus panel.
Key Features
- Supplied in Black
₦ 190,000.00Buy now -
Gent S4-34760-15 1.5m Venturi Tube
Gent S4-34760-15 1.5m Venturi Tube
The S4-34760-15 is a Venturi Tube designed for use with Duct Smoke Sensors.
₦ 190,000.00₦ 195,000.00Buy nowGent S4-34760-15 1.5m Venturi Tube
₦ 190,000.00₦ 195,000.00 -
Gent S4-34411 Interface Single Channel Output and Din Mounting Kit
Gent S4-34411 Interface Single Channel Output and Din Mounting Kit
The S4-34411 from Gent is an Interface Single Channel Output and Din Mounting Kit.
Vigilon can accommodate a high quantity of loop powered interface units offering fexible range of inputs and outputs from the FD&A system from plant control and signalling other systems in a fi re, to linking with other emergency management systems such as sprinklers or security systems.
₦ 190,000.00Buy now -
CTEC ZPF Network – fire alarm networking solution
🔹 Smart Network Technology
🔹 Scalable Architecture for Large Sites
🔹 Compatible with Addressable Systems
🔹 Reliable Performance in Critical EnvironmentsIdeal for hospitals, schools, commercial buildings, and industrial environments, the CTEC ZPF Network ensures real-time alerts, fault tolerance, and easy system expansion.
₦ 194,775.00₦ 199,775.00Buy nowCTEC ZPF Network – fire alarm networking solution
₦ 194,775.00₦ 199,775.00 -
C-TEC CFP AlarmSense 2 Zone Two-Wire Fire Alarm Panel
-
Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB).
-
Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
-
Manufactured by C-TEC in the UK.
-
Two AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points, sounders and visual indicators.
-
Four conventional sounder circuits.
-
Integral 1.5A EN54-4/A2 compliant switch mode PSU.
-
Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
-
Two on-board relays (Fire and Fault).
-
Two open-collector outputs (Remote and Reset).
-
‘Class change’ and alert inputs.
-
Installer-friendly design.
-
Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
-
Low 25mA quiescent current.
-
Multiple indicators.
-
System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system).
-
Space for two x 12V 3.3Ah VRLA batteries.
₦ 195,000.00₦ 200,000.00Buy nowC-TEC CFP AlarmSense 2 Zone Two-Wire Fire Alarm Panel
₦ 195,000.00₦ 200,000.00 -
-
Gent VS-SPARE-24 Replacement Spares Pack for Vigilon Control Panels – VIGPLUS-24 & VIGPLUS-72
Gent VS-SPARE-24 Replacement Spares Pack for Vigilon Control Panels – VIGPLUS-24 & VIGPLUS-72
The VS-SPARE-24 is a Replacement Spares Pack for Vigilon Control Panels – VIGPLUS-24 & VIGPLUS-72.
₦ 195,000.00Buy nowGent VS-SPARE-24 Replacement Spares Pack for Vigilon Control Panels – VIGPLUS-24 & VIGPLUS-72
₦ 195,000.00 -
ZETA Smart Connect Multiloop Card Module(MKII)
The SCM-MIM is a six input module that is
designed to be DIN mounted inside of a Smart
Connect Multiloop control panel. It’s powered
and interfaced to the Smart Connect Multiloop
via a RJ45 connection.₦ 195,500.00₦ 205,000.00Buy nowZETA Smart Connect Multiloop Card Module(MKII)
₦ 195,500.00₦ 205,000.00 -
Gent S4-34760-99 S-Quad Duct Mounting Bracket
Gent S4-34760-99 S-Quad Duct Mounting Bracket The S4-34760-99 is a Mounting Bracket designed for the S-Quad Duct Smoke Sensor.
₦ 196,500.00₦ 200,000.00Buy nowGent S4-34760-99 S-Quad Duct Mounting Bracket
₦ 196,500.00₦ 200,000.00 -
Gent VIG-NC-V3+ Network Card V3+
Gent VIG-NC-V3+ Network Card V3+
This network card is used to allow messages of status and control data to pass between control panels and network (or terminal) nodes in a networked fire system. The card must be plugged into the backplane of each panel and node in a dedicated slot. When it is plugged into the slot P8 on the backplane the external cables must be connected to terminal block P10, which is also located on the backplane. The dual-in-line switches on the card are set to program the address number and baud rate.
₦ 206,000.00Buy nowGent VIG-NC-V3+ Network Card V3+
₦ 206,000.00 -
CTEC 2 Zone Plastic Fire Alarm Control Panel
✅ Cost-effective and user-friendly
✅ Supports conventional fire alarm systems
✅ LED indicators for easy monitoring
✅ Fully compliant with BS EN54 standards
✅ Compact and lightweight design for easy installationWhether you’re upgrading an existing system or installing a new one, the CTEC 2 Zone Fire Alarm Panel delivers unmatched performance and peace of mind.
₦ 211,050.00₦ 221,050.00Buy nowCTEC 2 Zone Plastic Fire Alarm Control Panel
₦ 211,050.00₦ 221,050.00
