A fire alarm system notifies us of an emergency, to take action to protect ourselves, our employees, and the general public.
Fire detection systems identify fire early when there is still enough time for inhabitants to safely evacuate. Control actions begin while the fire is still minor, early detection helps to reduce property loss and operational disruption. Fire alarm systems transmit information about the location of the fire to emergency responders, speeding up the firefighting procedure.
Sounders go off to warn those within the building that there may be a fire. The fire alarm system could include a remote signal system. It would then notify the fire department via a central station.
-
Gent Flush Manual Call Point (XENS-850) 470 Ohms Glass
Gent XENS-850 Flush Manual Call Point 470 Ohms Glass
Gent Flush Manual Call Point are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.
Both break glass, and resettable operating elements can be used in the standard unit by a yellow strip on the element which becomes visible when activated.
With the addition of a hinged transparent cover the element may be protected against accidental operation.
A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch and thus a full functional test is achieved.
-
Gent XENS-829 Weatherproof Manual Call Point 470 Ohms Resistor Glass
Gent XENS-829 Weatherproof Manual Call Point 470 Ohms Resistor Glass
Gent’s range of conventional manual call points are designed to provide a manual alarm interface to conventional fi re alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.
-
S-Cubed
S-Cubed offers a comprehensive range of loop powered alarm
sounders with integrated voice and EN54-23 certified visual
alarms. Combined with flexible configuration from the fire
control panels, this loop powered device can give a differentiated
combination of audible and visual alarms for alert and general
evacuation. -
EXD SOUNDER TCB-0017
The EXD Sounder has been approved for use in potentially explosive atmospheres and very harsh environmental conditions.
The unit incorporates a three stage alarm option with sixty three tones to choose from which includes four tones that can be recorded or customised by the installer. All tones can be pre-set during installation.
The units also have the ability to be fitted with a telephone initiation function and can be used as the second ring output indicator for telephones when installed in very noisy environments.
The design allows for termination inside the enclosure. The sounder is supplied with a mounting bracket as standard. -
Texecom EXD Buzzer TCA-0005
EXD Buzzer
The Exd Buzzer is an explosion proof buzzer designed
for use in hazardous areas where a distinctive signal is
required. Certified to ATEX II 2G Exd e IIC T6, it is suitable for
use in Zone 1 and Zone 2 areas.
Producing a tone with low frequency, it cuts through
background noise more effectively than many other
devices of a similar output.
Mounted in a rugged reinforced polyester case and
weatherproof to IP66, it is suitable for use in the most
arduous conditions. -
Gent by Honeywell VESDA-E VEA-40 Aspirating Smoke Detector with LED Displays(VEA-040-A00)
combine VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors.
They use patented air sampling points and multichannel microbore air-sampling with three alarm sensitivity settings for the sampling points. As a
multi-channel, addressable system, the VEA detector is able to divide a
protected space into sampling locations, enabling the localization of potential sources of fire for faster incident response. The detectors are suitable for
protection of areas where pinpoint location of fire events is essential, thus providing ideal fire detection solutions for healthcare, offices, education, retail, prisons and electrical cabinets. A wide range of features provide flexibility, field programmability, enhanced connectivity and reduced total cost of ownership. -
Gent by Honeywell Vesda-E VEA-40 Aspirating Smoke Detector with 3.5” TouchScreen Display(VEA-040-A10)
Vesda-E VEA-40 Aspirating Smoke Detector
combines VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors.They use patented air sampling points and multichannel microbore air-sampling with three alarm sensitivity settings for the sampling points. As a
multi-channel, addressable system, the VEA detector is able to divide a
protected space into sampling locations, enabling the localization of potential sources of fire for faster incident response. The detectors are suitable for
protection of areas where pinpoint location of fire events is essential, thus providing ideal fire detection solutions for healthcare, offices, education, retail, prisons and electrical cabinets. A wide range of features provide flexibility, field programmability, enhanced connectivity and reduced total cost of ownership. -
Gent by Honeywell VESDA-E VEA(VER-A40-40-STX)
DESCRIPTION
The VESDA-E VEA series of detectors
combine VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors.COLOUR LCD DISPLAY
The VEA-040-A10 detector features a 3.5” colour LCD display which provides a range of status information including alarm and fault conditions as well as smoke level. Screens for each type of information are available using a simple navigation system.
VESDAnet™
VESDA detectors and devices communicate on VESDAnet which provides a
robust bi-directional communication network allowing continued redundant operation even during single point wiring failures. VESDAnet enables primary reporting, centralized configuration, control, maintenance and monitoring.
ETHERNET AND WIFI CONNECTIVITY
VESDA-E detectors offer Ethernet and WiFi connectivity as standard features. The detector can be added to a corporate network, allowing WiFi enabled tablet devices and laptops installed with Xtralis configuration software to connect
wirelessly to the detector via the network.
The VESDA-E VEA series of detectors
combine VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors -
GENT INTERFACE ENCLOSURE SMALL PLASTIC SURFACE MOUNT BOX (M200E-SMB)
Description
GENT INTERFACE ENCLOSURE SMALL PLASTIC SURFACE MOUNT BOX (M200E-SMB) is a housing for Vigion’s loop powered interfaces. Vigilon’s range of loop powered interfaces offer a comprehensive range of connectivity options with critical plant and other safety systems. Vigilon can accommodate a high quantity of loop powered interface units offering fexible range of inputs and outputs from the FD&A system from plant control and signalling other systems in a fi re, to linking with other emergency management systems such as sprinklers or security systems. Loop powered interfaces offer a cost effective solution with each device individually addressed increasing the overal management capability of the FD&A system.
Interfaces are either powered from the loop or require a separate mains supply. The mains power version has its own battery backup. -
Gent Loop Powered Interfaces- Single Input(S4-34410)
Vigilon’s range of loop powered interfaces offer
a comprehensive range of connectivity options
with critical plant and other safety systems.
Vigilon can accommodate a high quantity of loop powered interface units
offering fexible range of inputs and outputs from the FD&A system from
plant control and signalling other systems in a fi re, to linking with other
emergency management systems such as sprinklers or security systems. -
Gent Loop Powered Interfaces(VSINTM-PCB-UPG)
Vigilon’s range of loop powered interfaces offer
a comprehensive range of connectivity options
with critical plant and other safety systems.
Vigilon can accommodate a high quantity of loop powered interface units
offering fexible range of inputs and outputs from the FD&A system from
plant control and signalling other systems in a fi re, to linking with other
emergency management systems such as sprinklers or security systems.
Loop powered interfaces offer a cost effective solution with each device
individually addressed increasing the overal management capability of the
FD&A system.
Interfaces are either powered from the loop or require a separate mains
supply. The mains power version has its own battery backup.
chat with us