Popular
-
Gent Fire Alarm System Set of Keys for Key Switch Interface and MCP
-
Gent Fire Alarm Vigilon Manual Call Point with Glass Element and Protective Cover (Excludes Back Box)
-
Cutting-Edge Velocity Zeta Aspiration Smoke Detection Fire Alarm Panel
-
GENT ADDRESSABLE FIRE ALARM 1 TO 6 LOOP CONTROL PANEL
₦5,455,000.00
-
TEXECOM VERITAS IMPAQ E BURGLAR ALARM VIBRATION DETECTOR- WHITE
₦18,500.00
Category: Uncategorized
Showing 1–16 of 38 results
-
Out of Stock24V 1.2Ah VRLA battery pack (2 x 12V c/w link wire) Part No. BC283/2
Read more- A high-quality 24V 1.2Ah Valve Regulated Sealed Lead Acid battery pack.
- Comprises 2 x 12V rechargeable batteries and a link wire.
- Each battery measures 97 W x 50 H x 43 D mm.
- Quick connect 4.75mm ‘Faston’ type terminals.
-
Out of Stock24V 2A Unregulated Door Release PSU Part No. BF377
Read more- A boxed door release power supply unit designed to provide DC power to 24V DC electromagnetic door retainers.
- Can be controlled automatically from a fire alarm control panel or manual release keyswitch.
- 2A max. output.
- Includes Mains On and Output Triggered indicators
- No battery back up facility.
- Download datasheet
-
Out of Stock400-210W | Fire Alarm Safety Isolator Switch
₦0.00Read moreTechnical Specification
- Working Voltage : 250AV
- Colour : Red or White
- Switch Contact Rating : Double Pole – 250V AC 4Amp
- FUSE Rating : Max – 6A Fast (20mm) supplied
- Enclosure Material : RoHS Compliant FR ABS
- Weight : 175g
-
Out of StockAH (Fire Alarm) -0817 Resettable Manual Call Point
Read moreFeature CE & EN54-11 approval, type A outdoor. Red LED with current limiting resistor. Three different resistance selectable (240,470,680 ohm). Choice of red, yellow, blue or green finish also available for custom-made. Clear protection cover is also available (optional). Specification AH-0817 Resettable Manual Call Point Model AH-0817 Operating Contact 6A 125/250VAC Resistance 30MΩ Ambient Temperature …
-
Out of StockDoor Release Power Supply Unit | Part No. BF375PE
Read more- A compact double gang Mains derived power supply c/w a conventional fire detector circuit.
- Designed to provide power to up to 5 x 50mA 24V DC electromagnetic door retainers.
- When used with two x ActiV fire detectors allows a cost-effective ‘stand-alone’ automatic door release system to be built (pre-packed BF375PEK kits are available).
- Maximum PSU output is 250mA.
- Trigger Release and fault monitored Zone Trigger inputs facilitate straightforward connection to fire alarm detectors, control panels, building management systems, timers, relays and other ancillary equipment.
- Includes a manual release button, a Mains On and an Output Triggered indicator.
- Can be mounted on a standard 25mm UK double gang flush or surface back box.
- The BF375PE is also available as part of our BF375PEK automatic door release system kit which includes 1 x BF375PE, 2 x ActiV fire detectors, 2 x ActiV detector bases and 1 x electromagnetic door retainer.
-
Out of StockEnhance Fire Safety with S4-34890: Pack of 10 Resettable S4-34890 Call Points
Read moreUnlock the potential of seamless fire safety with the S4-34890 Vigilon Call Point Resettable Element. This innovative product, available in a pack of 10, ensures enhanced security measures and ease of use. Dive into the key features that make this call point a must-have for your fire safety arsenal. Key Features 1. Resettable Technology Experience …
Enhance Fire Safety with S4-34890: Pack of 10 Resettable S4-34890 Call PointsRead More
-
FISHER WALKTHROUGH METAL DETECTOR Protective Cover
₦45,000.00Add to cartProtective Cover A durable protective cover for transportation or storage.
-
Flashguard Xenon Beacons Security Alarm System QBS-0002
₦5,000.00Add to cartFlashguard weatherproof xenon beacons are ideal visual
indicators in a variety of applications.
All Flashguard beacons are fitted with a diffuser for
greater visibility and spread of light. Two styles are
available, Standard and Ultra Low Profile.
Standard: includes a terminal block and a 27mm deep
base supplied with a seal and grommet.
Ultra Low Profile: comes complete with a screw and nylon
wing nut and is supplied with mounting gasket and 40cm
of cable.
A weatherproof cable connector is available to upgrade
the product from IP65 rating to IP67. -
Out of StockFlashguard Xenon Beacons Security Alarm System QBS-0003
Read moreAll Flashguard beacons are fitted with a diffuser for
greater visibility and spread of light. Two styles are
available, Standard and Ultra Low Profile.
Standard: includes a terminal block and a 27mm deep
base supplied with a seal and grommet.
Ultra Low Profile: comes complete with a screw and nylon
wing nut and is supplied with mounting gasket and 40cm
of cable.
A weatherproof cable connector is available to upgrade
the product from IP65 rating to IP67. -
Out of StockGent 04390-41 Magnet Door Holder Floor Mounted
₦0.00Read moreGent 04390-41 Magnet Door Holder Floor Mounted 24V DC 45mA The 04390-41 is a Magnet Door Holder which is floor mounted. It is used to ensure fire doors close in an emergency and prevent the spread of fire and smoke. It features moulded ABS and a steel enclosure capable of floor or wall mounting. Key …
-
Out of StockGENT ADDRESSABLEE Conversion Kit For VIG-NODE-24 EN 54 to BS V3+ Functionality
₦0.00Read moreConversion Kit For VIG-NODE-24 EN 54 to BS V3+ Functionality
-
GENT Analogue Addressable Fire Alarm Manual Call Points C/W COVER ELEMENT -S4-34845
₦58,500.00Add to cartDescription
Manual call points for the Vigilon and Nano system are easy to install and can be mounted on standard installation back boxes or bespoke red back boxes for surface mounting. -
Gent Fire Alarm 4 Channel Interface I/O (PCB Only) S4-34450
₦170,000.00Add to cart- Loop Powered devices reducing cost of installation and maintenance
- Individual addresses to maximise information and flexible cause and effect
- Each device with EN54-17 short circuit handling for enhanced system integrity
- Comprehensive range of functionality in each device variant to simplify system design
- Complete range of mounting enclosures and accessories
- Options to connect conventional fire detectors such as flame and beam detectors
- Certified to EN54-17 and EN54-18
-
Out of StockGent Fire Alarm Loop Powered Interfaces (M200E-SMB)
Read moreDescription
Vigilon’s range of loop powered interfaces offer
a comprehensive range of connectivity options
with critical plant and other safety systems.
Vigilon can accommodate a high quantity of loop powered interface units
offering fexible range of inputs and outputs from the FD&A system from
plant control and signalling other systems in a fi re, to linking with other
emergency management systems such as sprinklers or security systems.
Loop powered interfaces offer a cost effective solution with each device
individually addressed increasing the overal management capability of the
FD&A system.
Interfaces are either powered from the loop or require a separate mains
supply. The mains power version has its own battery backup. -
Out of StockGent Fire Alarm Beam Sensors Pair (Transmitter & Receiver) Excluding Bracket and BaseS4-34740
Read moreGent S4-34740 Addressable Beam Sensor Pair
Gent S4-34740 S-Quad Addressable Loop Powered Beam Sensors Pair provides an enhanced solution for linear beam detection for applications where point detection is either not practical or economic.
-
Out of StockGent Fire Alarm Compact-Plus Loop Card(COMPACT-LPC-EN)
Read moreDescription
Honeywell Gent’s Loop Card provides EN5423 compliance, a powerful diagnostic tool and increased max alarm load.
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More