Popular
AlarmSense Standard Rate of Rise Heat Detector
 55000-190APO
- A high quality Type A1R rate of rise heat detector.
- Suitable for use with C-TEC’s CFP AlarmSenSe range of 2-8 Zone Two-Wire Fire Panels.
- Housed in a pure white polycarbonate moulding.
- Fitted with two alarm LEDs to allow 360º visibility.
- Third-party certified to EN54-5 by UL International (UK) Limited.
- 9-33V DC operating voltage.
- Requires a 45681-244APO AlarmSense base.
- Can also be purchased as part of a detector/sounder or detector/sounder visual indicator base combination (see Combination AlarmSense Devices section below).
| Approvals/certifications | Certified to EN54-5 by UL International (UK) Limited. |
| Application/operation | Generates an alarm condition when it detects a temperature of between 84ºC & 100ºC. |
| Application temperature | 55°C typical, 80°C max. |
| Static response temperature | 84°C min, 100°C max. |
| Supply wiring | 2-wire monitored, polarity insensitive. |
| Supply/operating voltage | 9 to 33V DC. |
| Quiescent current | 50µA @ 15 VDC. |
| Alarm voltage | 9-33V DC. |
| Alarm current | 1.5mA @ 2-8.5V; 25 +/- 2mA @ 10.5-15V; 1.5AmA @ 18-24V; 2mA @ 33V. |
| Alarm reset voltage | 2V max (1 second alarm reset time). |
| Product dimensions (mm) | 100mm diameter x 42m deep (detector only); 100mm diameter x 50mm deep (detector in base). |
| Construction & finish | White polycarbonate. |
| IP Rating | TBC. |
| Weight | 100g. |
Detector
 55000-391APO
- An integrating optical smoke detector.
- Responds well to slow-burning, smouldering fires.
- Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
- Housed in a pure white polycarbonate moulding.
- Fitted with two alarm LEDs to allow 360º visibility.
- Third-party certified to EN54-7 by UL International (UK) Limited.
- 9-33V DC operating voltage.
- Requires a 45681-244APO AlarmSense base.
- Can also be purchased as part of a detector/sounder or detector/sounder visual indicator base combination (see Combination AlarmSense Devices section below).
| Approvals/certifications | Certified to EN54-7 by UL International (UK) Limited. |
| Application/operation | Generates an alarm condition when it detects a pre-set threshold of smoke penetration into the smoke chamber. |
| Supply wiring | 2-wire monitored, polarity insensitive. |
| Supply/operating voltage | 9 to 33V DC. |
| Quiescent current | 50µA @ 15 VDC. |
| Alarm voltage | 9-33V DC. |
| Alarm current | 1.5mA @ 2-8.5V; 25 +/- 2mA @ 10.5-15V; 1.5AmA @ 18-24V; 2mA @ 33V. |
| Alarm reset voltage | 2V max (1 second alarm reset time). |
| Product dimensions (mm) | 100mm diameter x 42m deep (detector only); 100mm diameter x 50mm deep (detector in base). |
| Construction & finish | White polycarbonate. |
| IP Rating | TBC. |
| Weight | 100g. |
| Dimensions | 10.0 × 5.0 cm |
|---|
Related products
-
Zeta ID2/8/M Infinity ID2 Intelligent 2 Wire 8 Zone Fire Panel in Metal Enclosure
Read moreDESCRIPTION
Zeta Alarm Systems is proud to introduce the most advanced 2 wire system on the market. We can now provide a system that gives all of the benefits associated with a ‘2 Wire’ installation (less cable, quicker installation, cost savings on labour/product) and has the facility to ‘I.D.’ the devices.
The system is built on the proven communication protocol developed by Zeta Alarm Systems and shares the same platform as our largest, most powerful system.
The ID2 can be used for new installations, as a retrofit for any conventional system or as a replacement for existing 2 wire systems when the extra features are deemed to be desirable/necessary. This is possible because the ID2 devices sit on radial circuits, thus making it easy to ‘upgrade’ a system with the facility to I.D. devices without the need to re-wire.
-
Zeta Remote LED Indicators (MKII-RL/C & MKII-RL/W
₦9,500.00Add to cartDESCRIPTION are two models for the Conventional
Remote LED Indicator, a wall type MKII-RL/W
and ceiling mounted type (requires a base)
MKII-RL/C.
Each unit has 2 LEDs that light up to indicate an alarm. It
has the 8 LED appearance to keep it’s family identity.
The MKII-RL/W is supplied with a backbox for surface
mounting. It is also available without backbox for flush
fitting. -
Texecom EXD Buzzer TCA-0005
Read moreEXD Buzzer
The Exd Buzzer is an explosion proof buzzer designed
for use in hazardous areas where a distinctive signal is
required. Certified to ATEX II 2G Exd e IIC T6, it is suitable for
use in Zone 1 and Zone 2 areas.
Producing a tone with low frequency, it cuts through
background noise more effectively than many other
devices of a similar output.
Mounted in a rugged reinforced polyester case and
weatherproof to IP66, it is suitable for use in the most
arduous conditions. -
APOLLO AlarmSense Base Sounder/Visual Indicator Part No. 45681-509APO
Read more- Will accept any AlarmSense fire detector to provide fire detection and an audible AND visual alarm warning signal at the same point.
- 70d-87dB(A) sound output (visual indicator activates with sounder).
- Certified to EN54-3Â by UL International (UK) Limited.
- Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
- AlarmSense priority/non priority signal recognition
- Detects the removal of a detector head and reports a fault
- Continues to work during unauthorised removal of detector.
- High and low volume ranges.
- Red and white caps available for stand-alone use.
- Can also be purchased as part of a detector/sounder visual indicator base combination (see Combination AlarmSense Devices section below).
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
Reviews
There are no reviews yet.