- You cannot add that amount of "GPS320 Guard Patrol Tour Stick with LED Light" to the cart because there is not enough stock (0 remaining).
AlarmSense Standard Rate of Rise Heat Detector
₦ 22,000.00₦ 24,000.00 (-8%)
- An integrating optical smoke detector.
- Responds well to slow-burning, smouldering fires.
- Suitable for use with C-TEC's CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
- Housed in a pure white polycarbonate moulding.
AlarmSense Standard Rate of Rise Heat Detector
- A high-quality Type A1R rate of rise heat detector.
- Suitable for use with C-TEC’s CFP AlarmSenSe range of 2-8 Zone Two-Wire Fire Panels.
- Housed in a pure white polycarbonate moulding.
- Fitted with two alarm LEDs to allow 360º visibility.
- Third-party certified to EN54-5 by UL International (UK) Limited.
- 9-33V DC operating voltage.
- Requires a 45681-244APO AlarmSense base.
- Can also be purchased as part of a detector/sounder or detector/sounder visual indicator base combination (see Combination AlarmSense Devices section below).
| Approvals/certifications | Certified to EN54-5 by UL International (UK) Limited. |
| Application/operation | Generates an alarm condition when it detects a temperature of between 84ºC & 100ºC. |
| Application temperature | 55°C typical, 80°C max. |
| Static response temperature | 84°C min, 100°C max. |
| Supply wiring | 2-wire monitored, polarity insensitive. |
| Supply/operating voltage | 9 to 33V DC. |
| Quiescent current | 50µA @ 15 VDC. |
| Alarm voltage | 9-33V DC. |
| Alarm current | 1.5mA @ 2-8.5V; 25 +/- 2mA @ 10.5-15V; 1.5AmA @ 18-24V; 2mA @ 33V. |
| Alarm reset voltage | 2V max (1 second alarm reset time). |
| Product dimensions (mm) | 100mm diameter x 42m deep (detector only); 100mm diameter x 50mm deep (detector in base). |
| Construction & finish | White polycarbonate. |
| IP Rating | TBC. |
| Weight | 100g. |
Detector
55000-391APO
- An integrating optical smoke detector.
- Responds well to slow-burning, smouldering fires.
- Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
- Housed in a pure white polycarbonate moulding.
- Fitted with two alarm LEDs to allow 360º visibility.
- Third-party certified to EN54-7 by UL International (UK) Limited.
- 9-33V DC operating voltage.
- Requires a 45681-244APO AlarmSense base.
- Can also be purchased as part of a detector/sounder or detector/sounder visual indicator base combination (see Combination AlarmSense Devices section below).
| Approvals/certifications | Certified to EN54-7 by UL International (UK) Limited. |
| Application/operation | Generates an alarm condition when it detects a pre-set threshold of smoke penetration into the smoke chamber. |
| Supply wiring | 2-wire monitored, polarity insensitive. |
| Supply/operating voltage | 9 to 33V DC. |
| Quiescent current | 50µA @ 15 VDC. |
| Alarm voltage | 9-33V DC. |
| Alarm current | 1.5mA @ 2-8.5V; 25 +/- 2mA @ 10.5-15V; 1.5AmA @ 18-24V; 2mA @ 33V. |
| Alarm reset voltage | 2V max (1 second alarm reset time). |
| Product dimensions (mm) | 100mm diameter x 42m deep (detector only); 100mm diameter x 50mm deep (detector in base). |
| Construction & finish | White polycarbonate. |
| IP Rating | TBC. |
| Weight | 100g. |
Additional information
| Dimensions | 10.0 × 5.0 cm |
|---|
Reviews
There are no reviews yet.