Gent Beam Sensors Pair (Transmitter And Receiver), Excluding Bracket and Base (S4-34740)
₦ 580,000.00₦ 660,000.00 (-12%)
KEY FEATURES
• S-Quad Beam pairs
are loop powered
supporting 16 pairs
per loop
• Each beam can be set
to one of 6 sensitivity
states to provide a
best fi t for individual
applications
• The beam provides
increased resilience to
interference from the
sun and other light
sources
• Remote key switch
provides test facility at
ground level without
the need to gain
access to beams
mounted in high areas
• The beam
incorporates an LED
array to indicate signal
strength allowing
accurate alignment
during one person
commissioning
• Optimum sensitivity is
maintained by
automatic gain setting
triggered at the beam
during alignment
• The optical lens
design is intended to
minimise build up of
dust to reduce the
maintenance and
cleaning required
• The S-Quad beam is
compatible with early
versions of the Vigilon
Beam using the
S-Quad programming
base avoiding the
need to upgrade to
latest control software
Gent Beam Sensors Pair (Transmitter And Receiver), Excluding Bracket and Base (S4-34740)
Gent Beam Sensors Pair provides an enhanced solution for linear beam detection for applications where point detection is either not practical or economic.
Vigilon’s loop powered technology allows up to 16 beam pairs to be connected to the same loop circuit, each covering a distance of up to 100m without needing an external Power Supply Unit, wiring or interfacing. It’s compatible with the full range of Vigilon and Nano control panels and the S-Quad beam uses the panel software to ensure a fast response to fire
while offering software filters to reduce the number of unwanted alarms.
           Beam Transmitter
- Â Â Loop Powered (16 per loop)
- Â Â LED array to assist alignment
-   Auto gain adjustment allowing 1 man commissioning                                                                                                    Beam Receiver
- Â Loop Powered (16 per loop)
- Â 100m beam transmission
-  Improved immunity to EMC & dust build-up on the lens                                                                                                    KEY FEATURES
- Â S-Quad Beam pairs are loop powered supporting 16 pairs per loop
- Â Each beam can be set to one of 6 sensitivity states to provide the best fit for individual applications.
- Â The Gent beam sensor provides increased resilience to interference from the sun and other light sources.
- Â Remote key switch provides test facility at ground level without the need to gain access to beams mounted in high areas.
- Â The beam incorporates a LEDarray to indicate signal strength allowing accurate alignment during one-person commissioning.
- Â Optimum sensitivity is maintained by the automatic gain setting triggered at the beam during alignment
- Â The optical lens design is intended to minimize build-up of dust to reduce the maintenance and cleaning required
- Â The S-Quad beam is compatible with early versions of the Vigilon Beam using the S-Quad programming base avoiding the need to upgrade to the latest control software.
Additional information
Weight | 0.210 kg |
---|---|
Dimensions | 11.7 × 11.7 × 5.4 cm |
Reviews
There are no reviews yet.