GENT VS-IDOOR-PLUS REPLACEMENT INNER DOOR

Related products

• 

  wishlist

  C-TEC CFP 8 Zone Repeater Panel Part No. CFP760

  ₦100,000.00

  • • Can be used to repeat the functions of a master CFP standard or AlarmSense 2-8 zone fire panel at remote parts of site (e.g. all potential fire service entrances).
    • Up to 8 repeaters per CFP master.
    • Includes its own Mains power supply that requires its own standby battery supply.
    • Provides the user with access to all AL1 and AL2 functions.
    • Master/Repeater communication achieved using CFP761 network driver cards (one CFP761 is supplied with the Repeater, an additional CF761 card is required at the master CFP).
    • Communicates over screened two-wire fire resistant cable.
    • Total repeater network cable length should not exceed 1KM.
    • Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
    • Download datasheet

  Add to cart
• 

  wishlist

  C-TEC EP203 Automatic Extinguisher Panel Part No. EP203

  ₦169,000.00

   

  Technical Specifications
  Approvals/certifications Certified to EN12094-1 and EN54-2 & 4 by the LPCB.
  Mains supply 230V 50/60Hz.
  Mains rated current 810mA max.
  Internal power supply 19V-28.5V (27V nominal). Ripple 7V maximum (battery fault).
  Total output current limited to 1.5A @ 230Vac continuous, 3A peak (ImaxA eq 800mA).
  Quiescent current 40mA (on mains fail). Zone quiescent 2mA max.
  Max battery size and type 2 x 12V 7Ah VRLA connected in series.
  No. of detector zone circuits 3 @ 19-28Vdc (Max. length per circuit is 250m).
  Max. devices per detector zone 20 detectors (or 32 detectors/manual call points combined).
  No. of conventional sounder circuits 3 (two x 1st stage; one x 2nd stage). Max. length per circuit is 50m).
  EOL resistor value 6800 5% Tol. 0/25W (blue, grey, red, gold).
  Max. sounder output current 3 x 200mA.
  Auxiliary relays Six: (1) Fire; (2) Local Fire; (3) Extract Fan; (4) 1st Stage; (5) 2nd Stage; (6) Fault. Volt free single pole
  changeover. Max. switch current 1A; Max. switch voltage 30Vdc. Five additional relays available via
  EP212 relay card.
  Other outputs Extinguishant release (21-28Vdc, rated at 1A for 5 mins). Programmable to delay by 0-60 seconds; to
  be active for 1-300 seconds and to flood for 60-1800 seconds.
  Auxiliary inputs Six: (1) Manual Release; (2) Flow Switch; (3) Low Pressure; (4) Mode; (5) Hold; (6) Abort. 8K-2K normal;
  1.8K-200 active; 150-0 short circuit. EOL value: 6K8 +/-5%, 0.25W.
  Indicators Multiple indicators are provided – refer to the EP203 instructions for details.
  Controls Extinguishant release (housed in yellow casing); Accessed keyswitch; Operation keyswitch (Manual
  only or Manual & Auto); Buttons for Menu; Silence internal sounder; reset panel; silence/resound
  sounders and scrolling.
  Expansion connections Yes – for up to 8 x Remote status units (2 wire RS485 + 2 wire power) and/or up to 8 x Ecomomy
  status units (2 wire power + 2 wire mode select).
  Product dimensions (mm) 439 W x 276 H x 70 D mm (back box); 467 W x 293 H x 29 D mm (lid).
  Construction & finish Metal back box; metal chassis’ plastic lid.
  IP Rating IP30.
  Weight 4.2kg (without batteries).
  Operating conditions/temperature -5°C to +40°C. Max relative humidity: 95%

   

   

  Add to cart
• Sale!

  wishlist

  Zeta Infinity 8 Conventional 4 Zone-Fire-Alarm-Panel IN4

  ₦155,000.00 ₦148,000.00

   

  DESCRIPTION

  The Infinity 8 control panel is housed in the
  most attractive, modern designed, flame
  retardent ABS enclosure, utilising a switch
  mode power supply. It has a fully removable
  front cover which improves ease of access for
  cable installations.
  The Infinity 8 panel can also be ordered with a metal back
  box facilitating upto 7ah batteries to fit within the panel
  housing. To order this version add “/M” to the end of the
  model number (i.e. IN1/M, IN2/M, etc.)

  Add to cart
• Sale!

  wishlist

  GENT 8 ZONE REPEAT INDICATOR, LESS BATTERIES (13271-08LB)

  ₦265,000.00 ₦255,000.00

  Gent 13271-08LB 8 Zone Xenex Conventional Fire Alarm Repeat Panel EN54 (Less Batteries)

  BSI approved to EN54: Parts 2 & 4, the Xenex control panel can be used on installations meeting BS 5839:Part1. Control panel options for 2-8 zones can be specified.

  Designed to simplify system installation, each Xenex panel contains an integral power supply and battery support to drive up to 8 alarm sounder circuits, 2 auxiliary relay contacts, a zone disablement facility and also one-man test and commissioning features.

  Utilising LPCB approved conventional smoke or heat detectors, Xenex offers exceptional value for money.

  Add to cart