Popular
Gent Dual Optical LP Heat-Sensor Voice Sounder Red VAD -(S4-711-V-VAD-LPR )
₦59,000.00
DESCRIPTION
The S4-711-V-VAD-LPR Dual Optical Heat Sensor with Voice and Low Power Red VAD is a Gent Vigilon S-Quad sensor with a unique combination of sensing elements to provide quick, intelligent fire decisions. Smoke detection is enhanced using patented dual optical scatter technology. This allows it to be configured to filter specific risks such as steam and dust, resulting in significantly reduced false alarms.
The S4-711-V-VAD-LPR also provides a cost effective solution for alarm signalling.
Gent Dual Optical LP Heat-Sensor Voice Sounder Red VAD -(S4-711-V-VAD-LPR )
The S4-711-V-VAD-LPR Gent Dual Optical LP Heat-Sensor Voice Sounder Red VAD is a Gent Vigilon S-Quad sensor with a unique combination of sensing elements to provide quick, intelligent fire decisions. Smoke detection is enhanced using patented dual optical scatter technology. This allows it to be configured to filter specific risks such as steam and dust, resulting in significantly reduced false alarms.
The S4-711-V-VAD-LPR also provides a cost effective solution for alarm signalling.
VAD colour and performance variants
- High-intensity option with three intensity settings to achieve maximum flexibility for different room coverage, optimising loop coverage
- A standard intensity option is also available
- White VADs use a multi-die LED with a ‘Day White’ colour
- Red VADs use multiple red LEDs giving a true red colour
Voice messages
The speech function is provided by stored messages on a non-volatile flash memory component. This audible output from the flash memory can hold up to 20 seconds of speech. There is also the capability to provide complex tones, such as bell and DIN tones. Each sensor includes four standard messages with the component, which are as follows:
- Alert Message: (Female Voice) “An incident has been reported in the building, please await further instructions”
- Alarm Message 1: (Female Voice) “Attention please, this is an emergency please leave the building by the nearest available exit”
- Alarm Message 2: (Male Voice) “This is a Fire Alarm! Please leave the building immediately by the nearest available exit”
- Test Message: (Female Voice) “This is a test message, no action is required”
-
Key Features
- Sensor and alarm in one device reduce installation time and cost. Built-in high-intensity VAD helps alert occupants in noisy environments as well as the hard of hearing
- Meets all the requirements of the Equality Act 2010 • Compatible with the S-Cubed wall-mounted VAD
- State-of-the-art, high efficiency visual alarm technology
- Advanced power management that increases loop capacity and integrity
- Range of devices and power settings to suit widest range of building applications
- The light output that allows devices to be sited at standard smoke and heat detector spacings
- The synchronized flash rate across the whole control panel avoiding the risk of induced seizures
- VAD can operate independently of the sounder if required
- Meets the requirements of BS5839 part 1 relating to sensitivity to epilepsy
| Weight | 0.11 kg |
|---|---|
| Dimensions | 11.7 × 4.96 cm |
Related products
-
Gent Surface MCP (XENS-805) 470 Ohms Re-settable
₦10,000.00Add to cartGent XENS-805 Surface MCP 470 Ohms Re-settable Gent Surface MCP (XENS-805) 470 Ohms Re-settable requires no hammer and is easy and safe to operate. Gent’s conventional manual call points are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red colour and are …
-
Gent by Honeywell VESDA-E VEA(VER-A40-40-STX)
Read moreDESCRIPTION
The VESDA-E VEA series of detectors
combine VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors.COLOUR LCD DISPLAY
The VEA-040-A10 detector features a 3.5” colour LCD display which provides a range of status information including alarm and fault conditions as well as smoke level. Screens for each type of information are available using a simple navigation system.
VESDAnet™
VESDA detectors and devices communicate on VESDAnet which provides a
robust bi-directional communication network allowing continued redundant operation even during single point wiring failures. VESDAnet enables primary reporting, centralized configuration, control, maintenance and monitoring.
ETHERNET AND WIFI CONNECTIVITY
VESDA-E detectors offer Ethernet and WiFi connectivity as standard features. The detector can be added to a corporate network, allowing WiFi enabled tablet devices and laptops installed with Xtralis configuration software to connect
wirelessly to the detector via the network.
The VESDA-E VEA series of detectors
combine VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors -
Solo 823 Smoke & Cordless Heat Detector Test Set 9.3 Metres
₦2,261,000.00Add to cartSolo 823 Smoke & Cordless Heat Detector Test Set 9.3 metres Solo equipment is available in a number of conveniently arranged kits. Whether your need is for a simple starter kit, a universal smoke testing kit, or an all encompassing kit including a heat detector tester, there is one available. Larger kits are supplied with …
Solo 823 Smoke & Cordless Heat Detector Test Set 9.3 MetresRead More
-
Gent Flush Manual Call Point (XENS-850) 470 Ohms Glass
Read moreGent XENS-850 Flush Manual Call Point 470 Ohms Glass
Gent Flush Manual Call Point are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.
Both break glass, and resettable operating elements can be used in the standard unit by a yellow strip on the element which becomes visible when activated.
With the addition of a hinged transparent cover the element may be protected against accidental operation.
A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch and thus a full functional test is achieved.
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
Reviews
There are no reviews yet.