Popular
ZETA ZIS-40/W | Optional ZIS-40 Base Mounting Attachment With PG-7 Sealing Gland
Technical Specification
- Diameter of installation cable wires (ZIS-40; ZIS-40/W):Â 1mm max; n/a
- Spacing between installation holes (ZIS-40; ZIS-40/W):Â 63mm; 127mm
- Dimensions (ZIS-40; ZIS-40/W): Ø107 x 28.5mm; Ø112 x 26mm
- Combined height:Â 43mm
- Weight:Â 0.1kg
ZIS-40/W | Optional ZIS-40 Base Mounting Attachment With PG-7 Sealing Gland
The ZIS-40 base is designed for mounting ZISOSD detectors on a ceiling and for connecting detection lines to them.
The base can be mounted in a ZIS-40/W base attachment installed on suspension strands or in rooms where water vapour condensation is present on the ceiling. The base is equipped with an additional PG-7 sealing gland; this enables it to become a suspended base.
The ZIS-PHD is a spark proof detector, due to which it can be used in explosion hazard areas. These detectors operate in Zeta manufactured fire alarm system detector Dimensions (mm) & Weight (kg) lines behind a proper spark proof separator.
| Model Number | Description | Datasheets & Manuals |
|---|---|---|
| ZIS-40 | Base for Intrinsically Safe Smoke Detector | Datasheet |
Related products
-
APOLLO INTELLIGENT MANUAL CALL POINT – BLUE (SA5900-905APO)
Read moreThe Manual Call Point is commonly used to manually release secure doors or barriers in the event of emergency.
- Resettable operating element
- 170° viewable LED
- Suitable for semi flush or surface mounting
- ‘Plug and Play’ terminal connections for faster wiring
- Continuity link for wiring test before commissioning
- XP95, Discovery and CoreProtocol compatible
-
Zeta Fyreye MkII Conventional Heat Detectors MKII-HF/CS90
₦9,500.00Add to cartDESCRIPTION
The Fyreye Rate of Rise heat detectors (MKII-HFCS90) use a thermistor arrangement to sense a quick rise in
temperature and also a final threshold temperature of 90°C. The Fyreye fixed heat detector (MKII-HF/CS90) has a single thermistor arrangement that gives an alarm at a temperature of 90°C.
There are 4 types of mounting base available; standard or deep and with or without diode. -
Gent Flush Manual Call Point (XENS-850) 470 Ohms Glass
Read moreGent XENS-850 Flush Manual Call Point 470 Ohms Glass
Gent Flush Manual Call Point are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.
Both break glass, and resettable operating elements can be used in the standard unit by a yellow strip on the element which becomes visible when activated.
With the addition of a hinged transparent cover the element may be protected against accidental operation.
A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch and thus a full functional test is achieved.
-
Zeta Fyreye MKII Diode Base
₦1,500.00Add to cartDESCRIPTION
Fyreye MKII Diode Base
Low profile or deep diode mounting base for the Fyreye MKII range of conventional detectors.
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
Reviews
There are no reviews yet.