ZETA ZXT/W Xtratone Conventional Wall Sounder (White)

Related products

• 

  wishlist

  C-TEC ActiV Conventional Hi-Output W-2.75-9 Wall VAD c/w 100dB(A) Sounder (shallow base) Part No. BF433C/CC/SR

  • Third-party certified to EN54-3 (Sounders) and EN54-23 (VADs).
  • Provides ‘W-2.75-9’ rated light distribution when wall mounted (min. 0.4 lux over a 2.75 x 9m cuboid area). Also rated as a W-4-4 VAD.
  • Impressive 100dB(A) sound output @ 1m.
  • Includes 31 selectable primary tones and an optional secondary tone.
  • Two volume levels (high and low)
  • Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
  • Alarm Current at 30Vdc = 12.2mA (0.5Hz) or 19.5mA (1Hz)
  • Alarm Current at 18Vdc = 14.5mA (0.5Hz) or 25mA (1Hz)
  • IP21C rated.
  • Manufactured in the UK by C-TEC.

  Read more
• 

  wishlist

  APOLLO DISCOVERY MANUAL CALL POINT – OUTDOOR – YELLOW – ISOLATING 58100-953APO

  The Manual Call Point is used to control extinguishant release rather than to initiate an alarm signal on the fire detection system.

  • Suitable for weatherproof applications
  • Reports an alarm in under 0.2 seconds
  • ‘Plug and Play’ terminal connections for faster wiring
  • Continuity link for wiring test before commissioning
  • XP95 & Discovery compatible

  Read more
• 

  wishlist

  Gent Flush Manual Call Point (XENS-850) 470 Ohms Glass

  Gent XENS-850 Flush Manual Call Point 470 Ohms Glass

  Gent Flush Manual Call Point are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.

  Both break glass, and resettable operating elements can be used in the standard unit by a yellow strip on the element which becomes visible when activated.

  With the addition of a hinged transparent cover the element may be protected against accidental operation.

  A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch and thus a full functional test is achieved.

  Read more
• 

  wishlist

  HORING LIH AH-0621 UL Photoelectric Smoke Detector

  • UL Listed.
  • The standard detector is 2-wire or 3-wire with base.
  • For 4-wire type just add one relay output module on 3-wire base. Simple and easy module placement enables wider application.
  • Twin-color LED display enables viewer to easily identify the current status of detector.
  • Contacts material is highly acid-resistant and rust-resistant.
  • Detector is made of high endurance, solid and colorfast Fire-proof plastic.
  • Non-loosening screws on base terminal for easy installation.
  • Detector has passed strict EMC test, which greatly eliminates false alarms caused by interference from nearby sources.

  Read more