ZXTB/W Zeta Xtratone Conventional Combined Wall Sounder Beacon (White)

Related products

• 

  wishlist

  Gent Flush Manual Call Point (XENS-850) 470 Ohms Glass

  Gent XENS-850 Flush Manual Call Point 470 Ohms Glass

  Gent Flush Manual Call Point are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.

  Both break glass, and resettable operating elements can be used in the standard unit by a yellow strip on the element which becomes visible when activated.

  With the addition of a hinged transparent cover the element may be protected against accidental operation.

  A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch and thus a full functional test is achieved.

  Read more
• 

  wishlist

  Zeta ID2/8/M Infinity ID2 Intelligent 2 Wire 8 Zone Fire Panel in Metal Enclosure

  DESCRIPTION

  Zeta Alarm Systems is proud to introduce the most advanced 2 wire system on the market. We can now provide a system that gives all of the benefits associated with a ‘2 Wire’ installation (less cable, quicker installation, cost savings on labour/product) and has the facility to ‘I.D.’ the devices.

  The system is built on the proven communication protocol developed by Zeta Alarm Systems and shares the same platform as our largest, most powerful system.

  The ID2 can be used for new installations, as a retrofit for any conventional system or as a replacement for existing 2 wire systems when the extra features are deemed to be desirable/necessary. This is possible because the ID2 devices sit on radial circuits, thus making it easy to ‘upgrade’ a system with the facility to I.D. devices without the need to re-wire.

  Read more
• 

  wishlist

  C-TEC ActiV Conventional O-R-3-2.5-17 Base VAD c/w 96dB(A) Sounder Part No. BF432C/CC/W

  • • • • Third-party certified to EN54-3 (Sounders) and EN54-23 (VADs).
        • Provides ‘C-3-8.5’ light distribution (min 0.4 lux over a 3 x 8.5m cylindrical area).
        • Impressive 96dB(A) sound output @ 1m.
        • Includes 31 selectable primary tones and an optional secondary tone.
        • Two volume levels (high and low)
        • Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
        • Alarm Current at 30Vdc = 12.2mA (0.5Hz) or 19.5mA (1Hz)
        • Alarm Current at 18Vdc = 14.5mA (0.5Hz) or 25mA (1Hz)
        • Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.
        • Supplied with a BF431QCP quick connect plate and detector spur wires.
        • IP21C rated.
        • Download datasheet

  Read more
• 

  wishlist

  Texecom EXD Buzzer TCA-0005

  EXD Buzzer
  The Exd Buzzer is an explosion proof buzzer designed
  for use in hazardous areas where a distinctive signal is
  required. Certified to ATEX II 2G Exd e IIC T6, it is suitable for
  use in Zone 1 and Zone 2 areas.
  Producing a tone with low frequency, it cuts through
  background noise more effectively than many other
  devices of a similar output.
  Mounted in a rugged reinforced polyester case and
  weatherproof to IP66, it is suitable for use in the most
  arduous conditions.

  Read more