Archives: Shop
Showing 1–16 of 733 results
-
| Zeta ZT-MAINS-5 Mains Photoelectric Smoke Alarm with 9V Battery Back-Up
₦12,000.00Add to cartThe ZAIO-MI is used when both an input needs to be monitored and at the same time a local output (relay output) needs to be triggered to switch ancilliary equipment on or off during an alarm condition.
-
Adaptable Conduit Box Part No. NCP-27
Read more- A bespoke alternative to standard metal conduit boxes.
- Simplifies the installation of C-TEC manufactured fire detector bases and base sounder/VADs on ceiling tiles, solid ceilings, wooden beams, etc.
- Can be mounted directly onto a surface or in recesses behind ceiling tiles and plasterboard.
- Multiple access wiring points and lots of working space.
- Features two anti-rotation spikes.
- Easy termination of 16mm or 20mm cable glands ivia side and rear drill-out cable entry points.
-
AH-03127-BS Electronic Sounder and Beacon
Read moreGeneral This electronic sounder is designed for use with fire alarm systems, security systems and industrial signaling systems. Combined sounder and beacon provides and audio-visual warning with is suitable for places where high sound output and visual indication is required. Characteristics EN54-3 Approval Type B Sonder Beacon 32 signal tones selectable by Dip switch. …
-
AH-0315 Multi-Purpose Smoke and Heat Detector
Read more- Special chamber design has greatly decreased dust levels and improved detection accuracy.
- Dual LEDs for 360-degree visibility.
- Advanced technology enables this detector to increase its precision in fire detection, improve signals to avoid noise interference and thus reduce unwanted false alarm.
- Low current consumption that allows more detectors to be used with each control panel.
- Dual contacts on the base which enhance the connecting stability between sensor and base.
- All bases are fitted with a shorting spring to permit maintenance without disconnecting when removing the detector head
-
AH-9315 Combination Smoke and Heat Detector
Read moreCharacteristics Multi-purpose Design: when there is smoke or heat during pre-fire period, field situation will vary due to different environments. This combination design is to ensure that the pre-fire confirmation will not be affected by varying environments. Smoke gate has a special design to obscure the strong light effectively and allow smoke to come in …
-
AHMB-L Regular 4″ Mounting Base
Read moreCharacteristics Applies to model nos. AH-9315, AHR-871, AH-9920, and AH-0014. Major advantage of using the compatible mounting base is to avoid wasting time selecting proper detectors for various purposes and be able to install the base quickly and continuously. Afterwards, just plug-in proper detector head to complete the project. AHMB Regular 4″ Mounting Base Model …
-
AHMB-L Regular 6″ Mounting Base
Read moreCharacteristics Applies to model nos. AH-9315, AHR-871, AH-9920, and AH-0014. Major advantage of using the compatible mounting base is to avoid wasting time selecting proper detectors for various purposes and be able to install the base quickly and continuously. Afterwards, just plug-in proper detector head to complete the project. AHMB Regular 4″ Mounting Base Model …
-
AlarmSense High Temperature Heat Detector
Read more- Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
- Housed in a pure white polycarbonate moulding.
- Fitted with two alarm LEDs to allow 360º visibility.
-
AlarmSense Integrating Optical Smoke Detector
Read moreAlarmSense Integrating Optical Smoke Detector Part No. 55000-391APO An integrating optical smoke detector. Responds well to slow-burning, smouldering fires. Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels. Housed in a pure white polycarbonate moulding. Fitted with two alarm LEDs to allow 360º visibility. Third-party certified to EN54-7 by UL International …
-
AlarmSense Optical Smoke Detector
Read moreAlarmSense Optical Smoke Detector Part No. 55000-390APO A high quality optical detector. Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels. Housed in a pure white polycarbonate moulding. Fitted with two alarm LEDs to allow 360º visibility. Third-party certified to EN54-7 by UL International (UK) Limited. 9-33V DC operating voltage. Requires …
-
AlarmSense Standard Rate of Rise Heat Detector
Read more- An integrating optical smoke detector.
- Responds well to slow-burning, smouldering fires.
- Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
- Housed in a pure white polycarbonate moulding.
-
Aliquam erat volutpat
₦50.00Add to cartNulla finibus massa non maximus rhoncus. Duis ut ligula et nibh dictum eleifend vel non massa. Aliquam molestie, urna at pellentesque vehicula, sem justo condimentum purus, quis sodales dolor urna ut lorem. Aliquam erat volutpat. Sed ac ligula quis lacus consequat fringilla laoreet quis purus. Aliquam suscipit dapibus enim eu vulputate. Morbi tincidunt euismod pulvina
-
Aliquam id quam elementum arcu eleifend
₦44.00Add to cartAenean bibendum posuere neque, quis hendrerit libero ultrices lacinia. Vestibulum venenatis elit non bibendum pulvinar. In luctus urna sapien, posuere fermentum nunc tempus eget. Fusce hendrerit nec diam quis ornare. Duis auctor, libero in efficitur finibus, purus diam maximus est, et rhoncus sapien justo nec sem
-
Analogue Addressable Manual Call Points- S4-84845
₦42,000.00Add to cartDescription
Manual call points for the Vigilon and Nano system are easy to install and can be mounted on standard installation back boxes or bespoke red back boxes for surface mounting. -
APOLLO AlarmSense Base Sounder Part No. 45681-510APO
Read more- Will accept any AlarmSense fire detector to provide fire detection and an audible alarm warning signal at the same point.
- 70d-87dB(A) sound output.
- Certified to EN54-3Â by UL International (UK) Limited.
- Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
- AlarmSense priority/non priority signal recognition
- Detects the removal of a detector head and reports a fault
- Continues to work during unauthorised removal of detector.
- High and low volume ranges
- Red and white caps available for stand-alone use.
- Can also be purchased as part of a detector/sounder base combination (see Combination AlarmSense Devices section below).
-
APOLLO AlarmSense Base Sounder/Visual Indicator Part No. 45681-509APO
Read more- Will accept any AlarmSense fire detector to provide fire detection and an audible AND visual alarm warning signal at the same point.
- 70d-87dB(A) sound output (visual indicator activates with sounder).
- Certified to EN54-3Â by UL International (UK) Limited.
- Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
- AlarmSense priority/non priority signal recognition
- Detects the removal of a detector head and reports a fault
- Continues to work during unauthorised removal of detector.
- High and low volume ranges.
- Red and white caps available for stand-alone use.
- Can also be purchased as part of a detector/sounder visual indicator base combination (see Combination AlarmSense Devices section below).
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
