-
Gent BACnet Gateway Assembly for Vigilon Plus & Compact Plus with Controls & Command Builds (VIG-BNG-RW)1 × ₦ 825,000.00 -
1 × ₦ 105,000.00 -
1 × ₦ 250,000.00 -
1 × ₦ 107,100.00 -
-
1 × ₦ 250,000.00 -
1 × ₦ 250,000.00
-
🔌 CTEC 3+1 Power Supply – Reliable Power for Your Fire Alarm System! 🔥
✅ Key Functions & Features:
-
Supports 3 fire alarm zones + 1 auxiliary circuit
-
Provides stable, regulated power to fire control systems
-
Built-in battery backup charging support
-
LED indicators for status monitoring and diagnostics
-
Designed for CTEC fire alarm panels
-
Easy installation with durable components for long-lasting use
₦ 259,875.00₦ 269,875.00🔌 CTEC 3+1 Power Supply – Reliable Power for Your Fire Alarm System! 🔥
₦ 259,875.00₦ 269,875.00 -
-
C-TEC 3+1 Motherboard – fire alarm panels
✅ Features & Benefits:
-
Supports 3 Fire Zones + 1 Auxiliary Zone
-
Designed for C-TEC Fire Alarm Control Panels
-
Easy to Install & Configure
-
Built for Long-Lasting Performance
-
Ensures Optimal System Communication and Safety
Whether you’re upgrading your system or performing a repair, the C-TEC 3+1 motherboard delivers dependable operation where it matters most.
🛒 Shop Now – Fast Shipping | Certified Quality | Trusted by Professionals
₦ 259,875.00₦ 269,875.00C-TEC 3+1 Motherboard – fire alarm panels
₦ 259,875.00₦ 269,875.00 -
-
ZETA Zener Barrier
The Zeta zener barrier is an intrinsically safe, zone-powered, Zener-diode barrier for use in conventional fire detection systems for protection within hazardous areas.
₦ 258,500.00₦ 275,000.00ZETA Zener Barrier
₦ 258,500.00₦ 275,000.00 -
C-TEC Power Supply for ZFP Fire Alarm Panel
Key Features:
-
Designed exclusively for ZFP control panels
-
High-efficiency output and advanced fault diagnostics
-
Easy installation and long-lasting performance
-
Fully compliant with fire safety standards
Power your fire safety system with confidence. Shop now and keep your property protected 24/7!
₦ 256,725.00₦ 266,725.00C-TEC Power Supply for ZFP Fire Alarm Panel
₦ 256,725.00₦ 266,725.00 -
-
GENT 8 ZONE REPEAT INDICATOR, LESS BATTERIES (13271-08LB)
Gent 13271-08LB 8 Zone Xenex Conventional Fire Alarm Repeat Panel EN54 (Less Batteries)
BSI approved to EN54: Parts 2 & 4, the Xenex control panel can be used on installations meeting BS 5839:Part1. Control panel options for 2-8 zones can be specified.
Designed to simplify system installation, each Xenex panel contains an integral power supply and battery support to drive up to 8 alarm sounder circuits, 2 auxiliary relay contacts, a zone disablement facility and also one-man test and commissioning features.
Utilising LPCB approved conventional smoke or heat detectors, Xenex offers exceptional value for money.
₦ 255,000.00₦ 265,000.00GENT 8 ZONE REPEAT INDICATOR, LESS BATTERIES (13271-08LB)
₦ 255,000.00₦ 265,000.00 -
Zeta 8-Zone Fire Alarm Control Panel Motherboard
✅ Supports up to 8 detection zones
✅ Clear LED indicators for status monitoring
✅ Compatible with a wide range of conventional devices
✅ Built for durability and long-term performanceIdeal for: Offices, Schools, Residential Buildings, Warehouses, Commercial Spaces
₦ 252,000.00₦ 255,000.00Zeta 8-Zone Fire Alarm Control Panel Motherboard
₦ 252,000.00₦ 255,000.00 -
PAXTON NET 2 SOFTWARE PROFESSIONAL
Net2 is an advanced PC based access control solution. Our Net2 software offers centralised administration and control of sites with up to 1,000 doors and 50,000 users.
Perfectly tailor access privileges to groups or individuals quickly and easily using our intuitive, user-friendly software. Event reports can be generated in a few clicks and the single-door architecture makes specifying, installing and maintaining the system easy. Advanced features such as site graphics, IP camera integration and ‘Triggers and Actions’ further extend the capabilities of this cutting-edge system.
₦ 250,000.00PAXTON NET 2 SOFTWARE PROFESSIONAL
₦ 250,000.00 -
Zeta Fire Alarm Duct Unit c/w 230V Relay Board (ZT-DU/230)
- Fire and Fault relays
- Option for latching or non-latching
- Manual reset (latching option)
₦ 250,000.00 -
Gent COMPACT-FLUSH Control Panel Flush Surround
The Gent COMPACT-FLUSH Control Panel Flush Surround is a Gent Fire Alarm control panel flush surround. It is part of the mounting kit for the vigilon control panels.
₦ 250,000.00Gent COMPACT-FLUSH Control Panel Flush Surround
₦ 250,000.00 -
C-TEC Power Supply for ZFP Panel
🔋 Key Functions & Advantages:
-
✅ Seamless Integration: Specifically built to work with ZFP fire alarm systems.
-
✅ Battery Backup Support: Automatically switches to backup batteries in case of mains failure.
-
✅ Efficient Power Regulation: Provides stable and safe voltage to prevent damage or signal dropouts.
-
✅ LED Indicators: Clear status lights for easy monitoring and diagnostics.
-
✅ Overload & Short-Circuit Protection: Built-in safety to protect your entire system.
-
✅ Compliant with EN54 Standards: Trusted and certified for use in professional fire alarm installations.
Whether you’re upgrading or installing a new ZFP panel, the C-TEC Power Supply is the smart choice for dependable performance.
🛒 Available now
₦ 248,850.00₦ 250,000.00C-TEC Power Supply for ZFP Panel
₦ 248,850.00₦ 250,000.00 -
-
CTEC 4 Zone Plastic Fire Alarm Panel
✅ EN54 compliant
✅ Sturdy plastic housing
✅ LED indicators for clear zone status
✅ Ideal for offices, schools, shops, and residential complexes🔥 Keep your property protected and stay compliant with industry standards.
📦 Now available for fast delivery.₦ 240,450.00₦ 245,450.00CTEC 4 Zone Plastic Fire Alarm Panel
₦ 240,450.00₦ 245,450.00
chat with us