Archives: Shop
Showing 17–32 of 639 results
-
Gent Vigilon Plus Fire Alarm Addressable Repeater Control Panel with Batteries
Original price was: ₦1,350,000.00.₦1,225,000.00Current price is: ₦1,225,000.00.Add to cartDescription
Gent Vigilon Plus Repeater Panel with Batteries
The Vigilon Plus Repeat control panel provides full display and control of the system. Connecting to the detection loop, the repeat panel provides a cost-effective solution with minimum requirements for cabling and installation. Repeat panels are supplied complete with their own 72-hour power supply and standby batteries.
The feature-packed Vigilon analogue addressable fire detection and alarm system from Honeywell Gent offers medium to large sized building owners the latest in system flexibility and control panel aesthetics. Vigilon offers a degree of system sophistication that has not previously been available and incorporates a host of features designed to make it the simplest system to install, configure and use.
As well as providing the user with clear comprehensive information in the event of a fire, Vigilon additionally provides an entire historic log of the system’s management information. Should a system fault occur a detailed explanation is shown and the user can at any time navigate through the faults history.
-
Gent Bacnet Gateway Fire Alarm Interface Assembly for Vigilon & Compact with Controls & Command Builds
Original price was: ₦1,215,000.00.₦1,203,000.00Current price is: ₦1,203,000.00.Add to cartGent VIG-BNG-RW Bacnet Gateway Assembly for Vigilon & Compact with Controls & Command Builds
The BACNET-GW-3 provides an interface between NOTIFIER’s fire panel network (either the standard or the high-speed version) and a network using the BACnet/IP communication protocol.
BACnet protocol is an American National Standard (ANSI/ASHRAE 135-1995). With the Gateway inter- face, devices on NFN fire alarm control panels are represented as BACnet objects to the BACnet client.
-
GENT Fire Alarm NANO-24 Control Panel
Original price was: ₦1,250,000.00.₦1,200,000.00Current price is: ₦1,200,000.00.Add to cartDescription
From installation and commissioning to
everyday use, Nano delivers an experience that
makes the fire alarm system easy to use and safe
to operate.
The appearance of the panel means that Nano
may be installed and look good in any type of
building.
Nano operates the latest range of Vigilon loop
devices from Honeywell Gent. This allows a
small system to benefit from Gent’s advanced
fi re detection technology and powered loop
performance with ranges such as SQuad and
SCubed including powerful EN5423 offering.
The Nano commissioning tool allows simple
cause and effect to be configured either offline
or online using an easy to use commissioning
tool. -
Gent Mains Powered 4 Channel Interface – S4-34440-02
Original price was: ₦1,200,000.00.₦1,150,000.00Current price is: ₦1,150,000.00.Add to cartGent Mains Powered 4 Channel Interface – S4-34440-02 The S4 Mains powered interface units (Part No’s: S4-34440-02 and S4-34440-12) are EN54-4 compliant battery backed power supplies that can be directly connected to the Vigilon and Nano loop and also have highly flexible interfacing capability. The 4 channels can be individually configured to provide Output and …
Gent Mains Powered 4 Channel Interface – S4-34440-02Read More
-
Solo 461-001 Cordless Heat Detector Test Kit
Original price was: ₦1,120,000.00.₦1,100,000.00Current price is: ₦1,100,000.00.Add to cart- No cables / cords – powered from battery baton within pole
- Infra-red beam is broken by detector to activate heat generation
- Microprocessor control maintains constant heat and airflow
- Universal design suits widest range of detectors
- Battery powered
- Transparent test cup for clear view of detector LED
- Goes into standby after 120 seconds of use for protection
- Switches off completely after 5 minutes in standby
-
Gent Fire Alarm Vigilon Main Control Card EN54 Zonal Display VIG-MCC-EN
Original price was: ₦950,000.00.₦934,000.00Current price is: ₦934,000.00.Add to cartGent VIG-MCC-EN Vigilon Main Control Card EN54 Zonal Display
The Gent VIG-MCC-EN is a replacement main control card EN54 zonal display for use with the Gent Vigilon panel.
-
Gent Fire Alarm Vigilon Main Control Card Vigilon EN VIG-MCC-UPGR
Original price was: ₦950,000.00.₦933,000.00Current price is: ₦933,000.00.Add to cartGent VIG-MCC-UPGR Vigilon Main Control Card Vigilon EN
The VIG-MCC-UPGR is a Main Control Card designed for the Vigilon EN54 panels all doors (PLCC extractor necessary).
-
Gent Fire Alarm Beam Sensor Pair (Transmitter and Receiver) Excluding Bracket and Base c
Original price was: ₦950,000.00.₦930,000.00Current price is: ₦930,000.00.Add to cartGent S4-34740 Beam Sensor Pair (Transmitter and Receiver) Excluding Bracket and Base
Gent S4-34740 S-Quad Addressable Loop Powered Beam Sensor Pair provides an enhanced solution for linear beam detection for applications where Gent S4 Vigilon point detection is either not practical or economic.
-
Gent Fire Alarm Replacement PSU for VIG1-72 – VS-PSU-72
Original price was: ₦980,000.00.₦930,000.00Current price is: ₦930,000.00.Add to cartGent Replacement PSU for VIG1-72 – VS-PSU-72
The VS-PSU-72 is a replacement PSU power supply for the VIG1-72 Vigilon fire panel.
-
Gent Fire Alarm Beam Sensor Receiver S4-34742
Original price was: ₦950,000.00.₦920,000.00Current price is: ₦920,000.00.Add to cartGent S4-34742 Beam Sensor Receiver
The Gent 34742 is a beam sensor / detector receiver for use with the Gent 34741 beam detector transmitter.
-
Gent Fire Alarm S4-34760 Duct Housing
Original price was: ₦870,000.00.₦850,000.00Current price is: ₦850,000.00.Read moreGent S4-34760 Duct Housing (Including S-Quad Base and 0.6M Tube)
An optical smoke sensor specifically designed for use in ventilation ducting. A venturi probe samples the air in the duct for smoke. Detector housing is mounted externally to the duct. This device can trigger the shut-down of an air-conditioning or ventilation plant to prevent the spread of smoke.
-
Gent Fire Alarm Input/Output Card for Vigilon V3+ VIG-IOC-V3+
Original price was: ₦840,000.00.₦830,000.00Current price is: ₦830,000.00.Add to cartGent VIG-IOC-V3+ Input/Output Card for Vigilon V3+
The VIG-IOC-V3+ is an Input/Output Card for Vigilon V3+.
-
Zeta SMART1/M SmartConnect Touchscreen 1 Loop Addressable Fire Alarm Panel
Original price was: ₦800,000.00.₦722,500.00Current price is: ₦722,500.00.Add to cart4.3 inch colour touch screen display
Remote monitoring via a desktop PC or smartphone via the cloud
Easy-to-use configuration software
Full cause & effect programming via front panel or PC
250 Zeta MKII protocol devices per loop
250 available zones, 16 with LED indication
Built-in TCP-IP output, Built-in network facility
Up to 8 password-protected users
Meets all requirements of latest EN54 parts 2 & 4
Extensive Day/Night mode programming
2 programmable local inputs
2 sounder circuits, Fire & fault relays -
Solo 100-001- Fibreglass 4 Section Telescopic Pole – 4.5 metres
Original price was: ₦685,000.00.₦675,000.00Current price is: ₦675,000.00.Add to cart- SOLO 100/108 Telescopic Poles
- Exceptionally lightweight and very portable
- Lock system as standard named “Totalock”
- Non Conductive Material
- Makes the job more efficient
- Strong & Durable Fibreglass
- Can be used with all SOLO tools and attachments
- Use with tools up to 6 metres (Including Height of Man)
- Add SOLO 101-001 Extension poles to reach 9 metres (Including Height of Man)
-
Gents Fire Alarm Loop Powered Interfaces(S4-34440-02)
Original price was: ₦674,000.00.₦655,000.00Current price is: ₦655,000.00.Read moreDESCRIPTION
Interfaces are used to link the
fire alarm system to other plant
management devices such as
sprinklers and security systems.
They can also be used to link to a
zone of conventional detectors.
The Vigilon system can
accommodate a high capacity of
single channel interfaces on the
loop operating both inputs and
outputs.
The loop powered four channel
interface range has individually
sectored outputs with channel
1 set as a loop powered zone
module.
All interfaces are seen by the
panel as one address although
each input/output can have a
separate label displayed at the
panel.
Interfaces are either powered
from the loop or require a
separate mains supply. The
mains power version has its own
battery backup. -
Solo 110-001Fibreglass 4 Section Telescopic Pole – 1.75Metres
Original price was: ₦620,000.00.₦617,000.00Current price is: ₦617,000.00.Add to cartThe Solo 110 Access Pole offers safe access to detectors installed at heights of up to 3 metres. Solo 110-001 Extends to 1.75 metres to provide maximum reach of 3 metres Can be used with up to 3 Solo 111 extension poles Less disruption when testing Quicker movement between and around sites
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
