Popular
Low profile GENT sounder, ideal for use in environments where aesthetics should be discrete as possible.
The GENT S3-SN-R Electronic 2 way Sounder White is rated at 100 dBA but can be remotely configured using the HandiLink IR remote control to turn on individual sounders when in commissioning mode and to adjust the volume.
Access is no longer required to the sounder unit meaning commissioning time is cut down considerably. To enable this function, a password is required at the panel so settings cannot be changed by accident or with the intention of disrupting the environment in which it is located.
The S-cubed range of alarm sounders incorporates sound, speech and strobe effects all in one range of alarm devices. The range offers all variants in the choice of two colours (red or white), with either a shallow base version sealed to IP31 or a deep base version sealed to IP55.
All the low profile sounders have the option of an integral strobe. As an aid to commissioning there is an option to use the HandiLink IR remote controls to select sounder tones and adjust the volume remotely. This means physical access is not required to make this adjustment. This facility is only active when sounders are turned on from the alarm panel.
Key Features:
- Very low power consumption means more sounders and strobes per circuit
- The strobe option is equivalent to a standard 3w xenon strobe and uses 1/20th of the power
- 32 sounder tones are available
- Voice enhanced sounders are available in the range
- 4 voice phrases and a bell sound are available as standard
- All sound and strobe signals are synchronised to better than +/-30mS over 20 minutes
- Sounders and strobes are compatible with 12V and 24V systems
- A third wired option allows the selection of 2 alternative sounds (ideal for class change applications)
- Products incorporate innovative design features for which multiple patents have been granted
Related products
-
Zeta ID2/4/M Infinity ID2 Intelligent 2 Wire 4 Zone Fire Panel in Metal Enclosure
Read moreDescription
Zeta Alarm Systems is proud to introduce the most
advanced
2 wire system on the market. We can now
provide
a system that gives all of the benefits associated
with
a ‘2 Wire’ installation (less cable, quicker installation,
cost savings on labour/product) and has the facility to
‘I.D.’ the devices.
The system is built on the proven communication protocol
developed by Zeta Alarm Systems and shares the same
platform as our largest, most powerful system.
The ID2 can be used for new installations, as
a retrofit for any conventional system or as a replacement for
existing
2 wire systems when the extra features are
deemed to be desirable/necessary. This is possible
because the ID2 devices sit on radial circuits, thus
making it easy to ‘upgrade’
a system with the facility to
I.D. devices without the need to re-wire.
Technical -
APOLLO DISCOVERY MANUAL CALL POINT – OUTDOOR – YELLOW – ISOLATING 58100-953APO
Read moreThe Manual Call Point is used to control extinguishant release rather than to initiate an alarm signal on the fire detection system.
- Suitable for weatherproof applications
- Reports an alarm in under 0.2 seconds
- ‘Plug and Play’ terminal connections for faster wiring
- Continuity link for wiring test before commissioning
- XP95 & Discovery compatible
-
Zeta Fyreye MkII Conventional Heat Detectors MKII-HF C/W Base
₦15,000.00Add to cartDESCRIPTION
The Fyreye fixed heat detector (MKII-HF) has a
single thermistor arrangement that gives an alarm at a
temperature of 57°C.
There are 4 types of mounting base available; standard
or deep and with or without diode. -
C-TEC ActiV Conventional Hi-Output W-2.75-9 Wall VAD c/w 100dB(A) Sounder (shallow base) Part No. BF433C/CC/SR
Read more- Third-party certified to EN54-3 (Sounders) and EN54-23 (VADs).
- Provides ‘W-2.75-9’ rated light distribution when wall mounted (min. 0.4 lux over a 2.75Â x 9m cuboid area). Also rated as a W-4-4 VAD.
- Impressive 100dB(A) sound output @ 1m.
- Includes 31 selectable primary tones and an optional secondary tone.
- Two volume levels (high and low)
- Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
- Alarm Current at 30Vdc =Â 12.2mA (0.5Hz) or 19.5mA (1Hz)
- Alarm Current at 18Vdc =Â 14.5mA (0.5Hz) or 25mA (1Hz)
- IP21C rated.
- Manufactured in the UK by C-TEC.
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
Reviews
There are no reviews yet.