Popular
ZT-ST5-5 Zeta 3V Standalone Smoke Detector (5 Year Life)
They feature VdS and UL-approved photoelectric sensing components with precise smoke detection and long life operation (5 year life with a 3V lithium battery) or (10 years with a 3V long life lithium battery). A proved quality with 10 million pieces installed over the world. Russian standard model available too.
Zeta Battery Operated Detectors
The ZT-ST5 & ZT-ST5/10 stand-alone photoelectric residential smoke alarms are NF approved and can be calibrated to either UL, BSI or VdS requirements.
They feature VdS and UL-approved photoelectric sensing components with precise smoke detection and long life operation (5 year life with a 3V lithium battery) or (10 years with a 3V long life lithium battery). A proved quality with 10 million pieces installed over the world. Russian standard model available too.
The ZT-TH5 stand-alone heat detector was designed with precise microprocessor control integrating both Rate-of- Rise and Fixed Temperature heat detection.
It’s perfectly suitable for installation in all environments especially the kitchen, garage, factory etc. The ZT-TH5 uses a 9V alkaline battery and meets EN 54-5 standards.
| Model Number | Description | Datasheets & Manuals |
|---|---|---|
| ZT-ST5-5 | Zeta 3V Standalone Smoke Detector (5 Year Life) | Datasheet |
| Dimensions | 15 × 9 × 4.5 cm |
|---|
Related products
-
Zeta Infinity 8 Conventional 6 Zone-Fire-Alarm-Panel IN6
₦152,000.00Add to cartDESCRIPTION
The Infinity 8 control panel is housed in the
most attractive, modern designed, flame
retardant ABS enclosure, utilising a switch
mode power supply. It has a fully removable
front cover which improves ease of access for
cable installations.
The Infinity 8 panel can also be ordered with a metal back
box facilitating upto 7ah batteries to fit within the panel
housing. To order this version add “/M” to the end of the
model number (i.e. IN1/M, IN2/M, etc -
Gent 4 ZONE CONVENTIONAL PANEL, EN54 LESS BATTERIES (13270-04LB)
₦235,500.00Add to cartDESCRIPTION
Gent 13270-04LB 4 Zone Conventional Xenex Fire Panel
BSI approved to EN54: Parts 2 & 4, the Xenex control panel can be used on installations meeting BS 5839:Part1. Control panel options for 2-8 zones can be specified.
Designed to simplify system installation, each Xenex panel contains an integral power supply and battery support to drive up to 8 alarm sounder circuits, 2 auxiliary relay contacts, a zone disablement facility and also one-man test and commissioning features.
-
Reset Call Point Waterproof Reset Call Point
₦21,000.00Add to cartDESCRIPTION
The ZT-CP3 and ZT-CP3/WP call points are
unique in that they mimic the feel of breaking
glass whilst offering the user the benefits and
environmental advantages of a re-settable
operating element.
The CP3 uses a simple yet ingenius patented mechanism
which consists of a rigid plastic operating element and
an over centre spring mechanism. This arrangement
provides real action on operation and simulates break
glass activation. -
C-TEC ActiV Conventional ‘O Class’ Base VAD c/w Voice Sounder Part No. BF455C/CC/W
Read more-
-
-
- Superb sound intelligibility.
- Choose from two evacuation voice messages and four evacuation alarm tones (your selected evacuation message will be preceded by the selected tone).
- Provides ‘O-R-3-2.5-17’ light distribution using the same lenses and electronics as our EN54-3 & 23 certified base sounder VAD.
- Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
- Alarm Current at 30Vdc = 17mA (0.5Hz) or 24mA (1Hz)
- Alarm Current at 18Vdc = 18.5mA (0.5Hz) or 30mA (1Hz)
- Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.
- Supplied with a BF431QCP quick connect plate and detector spur wires.
- IP21C rated.
-
-
-
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
Reviews
There are no reviews yet.