Popular
-
Zeta BreakGlass Yellow
Original price was: ₦ 32,000.00.₦ 31,500.00Current price is: ₦ 31,500.00.
-
Zeta Weatherproof Fire Alarm Breakglass Red
Original price was: ₦ 29,000.00.₦ 28,875.00Current price is: ₦ 28,875.00.
-
Gent Four-Channel Mains Switching Interface with Enclosure (S4-3440-02)
Original price was: ₦ 1,900,000.00.₦ 1,890,000.00Current price is: ₦ 1,890,000.00.
-
C-Tec FP 8 Zone Conventional Fire Alarm Panel-Ff388-2
Original price was: ₦ 125,000.00.₦ 120,000.00Current price is: ₦ 120,000.00.
-
SOCA SL-130 Dead Bolt Lock ( All purpose type )
Original price was: ₦ 15,000.00.₦ 13,000.00Current price is: ₦ 13,000.00.
C-TEC CFP AlarmSense 4 Zone Two-Wire Fire Alarm Panel
Original price was: ₦ 250,000.00.₦ 222,000.00Current price is: ₦ 222,000.00.
-
Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB).
-
Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
-
Manufactured by C-TEC in the UK.
-
Two AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points, sounders and visual indicators.
-
Four conventional sounder circuits.
-
Integral 1.5A EN54-4/A2 compliant switch mode PSU.
-
Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
-
Two on-board relays (Fire and Fault).
-
Two open-collector outputs (Remote and Reset).
-
‘Class change’ and alert inputs.
-
Installer-friendly design.
-
Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
-
Low 25mA quiescent current.
-
Multiple indicators.
-
System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system).
-
Space for two x 12V 3.3Ah VRLA batteries.
0 in stock
Protect Smarter with the C-TEC CFP AlarmSense 4-Zone Fire Alarm Panel
Reliable. Cost-effective. Built for safety.
The C-TEC CFP AlarmSense Two-Wire Fire Alarm Panel offers powerful protection with a simplified installation—using just two wires per zone to connect detectors, sounders, and call points. Ideal for small to medium-sized buildings, this 4-zone system delivers intelligent fire detection without the complexity.
Easy to install. Effortless to maintain. Trusted in thousands of locations.
Choose the fire panel that saves time, cuts costs, and delivers peace of mind.
LPCB certified to EN54-2/4, C-TEC’s CFP two-wire 4 zone AlarmSense fire panel is designed to work with Apollo’s AlarmSense range of detectors, call points, sounders and visual indicators.
Most conventional fire systems work with two pairs of wires per zone: one pair for detection devices; the other for alarm devices. By using different voltage bands for quiescent and alarm states, AlarmSense components can be connected to the same pair of supply wires. This reliable technology takes all of the complexity out of fire system design, leading to quicker, more flexible installation and around a 20-25% reduction of labour over a standard four wire system.
The CFP704-2 includes four AlarmSense zones, four conventional sounder circuits, class change & alert inputs and on-board fire & fault relays. A wide range of engineering functions are also provided including selectable zone delays, coincidence and non-latching zone facilities.
| Dimensions | 38.0 × 23.5 cm |
|---|
Related Products
-
Gent XENS-829 Weatherproof Manual Call Point 470 Ohms Resistor Glass
Read moreGent XENS-829 Weatherproof Manual Call Point 470 Ohms Resistor Glass
Gent’s range of conventional manual call points are designed to provide a manual alarm interface to conventional fi re alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.
-
Gent Key Operated, Surface Mounted C/W BackBox (XENS-807)
Read moreOur conventional manual call points are designed to provide a manual
alarm interface to conventional fi re alarm control panels. All call points
are supplied in the standard red colour and are available in semi-fl ush
mounting or surface mounting options. The manual call points are all with
a 470 Ohm resistor and Normally Open contact, complete with glass.
Both break glass, and resettable operating elements can be used in the
standard unit by a yellow strip on the element which becomes visible when
activated. -
Gent Change Over Contact MCP
Read moreGent Change Over Contact is a conventional manual call point, designed to provide a manual
alarm interface to conventional fire alarm control panels. All call points
are supplied in the standard red color and are available in semi-flush
mounting or surface mounting options. The manual call points are all with
a 470 Ohm resistor and Normally Open contact, complete with glass.
Both break glass, and resettable operating elements can be used in the
standard unit by a yellow strip on the element which becomes visible when
activated.
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
Reviews
There are no reviews yet.