Popular
Gent XENS-805 Surface MCP 470 Ohms Re-settable
Gent Surface MCP (XENS-805) 470 Ohms Re-settable requires no hammer and is easy and safe to operate.
Gent’s conventional manual call points are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.
Both break glass, and resettable operating elements can be used in the standard unit by a yellow strip on the element which becomes visible when activated.
With the addition of a hinged transparent cover the element may be protected against accidental operation.
A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch and thus a full functional test is achieved.
Key Features
- Fully compliant with EN54, Part 11
- Re-settable operating element option
- Weather proof IP67
- Semi-flush or surface mounting
- 470 Ohm resistor and Normally Open contact complete with glass
- Resistive and clean contact connections
| Technical Data | |
| Current Rating | 2A (switching only) |
| Humidity | 93+ 3% non-condensing |
| Ingress Protection | IP24D |
| Operating Temperature | -10°C to +55°C |
| Operating Voltage | 30VDC maximum |
| Weight | 180g (130g Semi- flush) |
| Weight | 0.180 kg |
|---|---|
| Dimensions | 9.3 × 8.9 × 5.95 cm |
Related products
-
Gent Flush Manual Call Point (XENS-850) 470 Ohms Glass
Read moreGent XENS-850 Flush Manual Call Point 470 Ohms Glass
Gent Flush Manual Call Point are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.
Both break glass, and resettable operating elements can be used in the standard unit by a yellow strip on the element which becomes visible when activated.
With the addition of a hinged transparent cover the element may be protected against accidental operation.
A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch and thus a full functional test is achieved.
-
Gent Conventional Optical Smoke Detector : Eco 1003
₦13,500.00Add to cartPhoto-thermal model
Laser-based remote test unit
EN 54 Certified (2000 edition)
Photoelectric, photo-thermal and thermal detectors
Improved chamber design
Compatible with fire and security systems
-20 to +60ºC operating temperature range
Choice of bases (including a 12V relay version)
Photoelectric model with integral piezoelectric sounder
(availability subject to further announcement) -
APOLLO INTELLIGENT MANUAL CALL POINT – BLUE (SA5900-905APO)
Read moreThe Manual Call Point is commonly used to manually release secure doors or barriers in the event of emergency.
- Resettable operating element
- 170° viewable LED
- Suitable for semi flush or surface mounting
- ‘Plug and Play’ terminal connections for faster wiring
- Continuity link for wiring test before commissioning
- XP95, Discovery and CoreProtocol compatible
-
Texecom EXD Buzzer TCA-0005
Read moreEXD Buzzer
The Exd Buzzer is an explosion proof buzzer designed
for use in hazardous areas where a distinctive signal is
required. Certified to ATEX II 2G Exd e IIC T6, it is suitable for
use in Zone 1 and Zone 2 areas.
Producing a tone with low frequency, it cuts through
background noise more effectively than many other
devices of a similar output.
Mounted in a rugged reinforced polyester case and
weatherproof to IP66, it is suitable for use in the most
arduous conditions.
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
Reviews
There are no reviews yet.