Gent Surface MCP (XENS-805) 470 Ohms Re-settable
Gent XENS-805 Surface MCP 470 Ohms Re-settable
Gent Surface MCP (XENS-805) 470 Ohms Re-settable requires no hammer and is easy and safe to operate.
Gent’s conventional manual call points are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.
Both break glass, and resettable operating elements can be used in the standard unit by a yellow strip on the element which becomes visible when activated.
With the addition of a hinged transparent cover the element may be protected against accidental operation.
A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch and thus a full functional test is achieved.
- Fully compliant with EN54, Part 11
- Re-settable operating element option
- Weather proof IP67
- Semi-flush or surface mounting
- 470 Ohm resistor and Normally Open contact complete with glass
- Resistive and clean contact connections
|Current Rating||2A (switching only)|
|Humidity||93+ 3% non-condensing|
|Operating Temperature||-10°C to +55°C|
|Operating Voltage||30VDC maximum|
|Weight||180g (130g Semi- flush)|
|Dimensions||9.3 × 8.9 × 5.95 cm|
There are no reviews yet.