Gent Flush Manual Call Point (XENS-850) 470 Ohms Glass

Gent Flush Manual Call Point is designed to provide a manual alarm interface to conventional fire alarm control panels. All Gent Flush Manual Call Point are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.

Both break glass, and resettable operating elements can be used in the standard unit by a yellow strip on the element which becomes visible when activated.

With the addition of a hinged transparent cover the element may be protected against accidental operation.

A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch and thus a full functional test is achieved.

Key Features

• Fully compliant with EN54, Part 11
• Re-settable operating element option
• 470 Ohm resistor and Normally Open contact complete with glass
• Resistive and clean contact connections

• Technical Data
  Current Rating	2A (switching only)
  Dimensions	Height 93mm – Width 89
  Humidity	93+ 3% non-condensing
  Ingress Protection	IP24D
  Operating Temperature	-10°C to +55°C
  Operating Voltage	30VDC maximum
  Weight	180g (130g Semi- flush)

Link to Product Datasheet