- You cannot add that amount of "Zeta BreakGlass Yellow Weatherproof Call Point (Fire Alarm System)" to the cart because there is not enough stock (0 remaining).
-
AlarmSense Optical Smoke Detector
AlarmSense Optical Smoke Detector – Reliable Fire Safety by Trends Ventures Limited
Stay protected with the AlarmSense Optical Smoke Detector, built for fast, accurate smoke detection. Perfect for homes, offices, and commercial buildings, it integrates easily into AlarmSense two-wire systems for efficient installation.
Key Features:
-
Fast response to slow-burning fires
-
Reduced false alarms
-
Compatible with AlarmSense control panels
-
Easy installation & low maintenance
-
LED status indicator for clear alerts
Now available at Trends Ventures Limited – your trusted fire and safety partner.
₦ 23,000.00₦ 25,000.00Buy nowAlarmSense Optical Smoke Detector
₦ 23,000.00₦ 25,000.00 -
-
C-TEC Red Plastic Fire Panel Key
- A spare plastic S-KEY for use C-TEC’s CFP, XFP and ZFP fire panels.
- Provides authorised users with access to a fire panel’s authorised user controls.
- Finished in red polycarbonate for extra strength.
- See tech. specs below for full panel compatibility details
-
C-TEC CFP AlarmSense 8 Zone Two-Wire Fire Alarm Panel
-
Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB).
-
Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
-
Manufactured by C-TEC in the UK.
-
Eight AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points, sounders and visual indicators.
-
Four conventional sounder circuits.
-
Integral 1.5A EN54-4/A2 compliant switch mode PSU.
-
Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
-
Two on-board relays (Fire and Fault).
-
Two open-collector outputs (Remote and Reset).
-
‘Class change’ and alert inputs.
-
Installer-friendly design.
-
Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
-
Low 25mA quiescent current.
-
Multiple indicators.
-
System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system).
-
Space for two x 12V 3.3Ah VRLA batteries.
₦ 295,000.00₦ 300,000.00Buy nowC-TEC CFP AlarmSense 8 Zone Two-Wire Fire Alarm Panel
₦ 295,000.00₦ 300,000.00 -
-
C-TEC CFP AlarmSense 4 Zone Two-Wire Fire Alarm Panel
-
Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB).
-
Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
-
Manufactured by C-TEC in the UK.
-
Two AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points, sounders and visual indicators.
-
Four conventional sounder circuits.
-
Integral 1.5A EN54-4/A2 compliant switch mode PSU.
-
Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
-
Two on-board relays (Fire and Fault).
-
Two open-collector outputs (Remote and Reset).
-
‘Class change’ and alert inputs.
-
Installer-friendly design.
-
Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
-
Low 25mA quiescent current.
-
Multiple indicators.
-
System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system).
-
Space for two x 12V 3.3Ah VRLA batteries.
₦ 222,000.00₦ 250,000.00Buy nowC-TEC CFP AlarmSense 4 Zone Two-Wire Fire Alarm Panel
₦ 222,000.00₦ 250,000.00 -
-
C-TEC CFP AlarmSense 2 Zone Two-Wire Fire Alarm Panel
-
Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB).
-
Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
-
Manufactured by C-TEC in the UK.
-
Two AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points, sounders and visual indicators.
-
Four conventional sounder circuits.
-
Integral 1.5A EN54-4/A2 compliant switch mode PSU.
-
Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
-
Two on-board relays (Fire and Fault).
-
Two open-collector outputs (Remote and Reset).
-
‘Class change’ and alert inputs.
-
Installer-friendly design.
-
Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
-
Low 25mA quiescent current.
-
Multiple indicators.
-
System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system).
-
Space for two x 12V 3.3Ah VRLA batteries.
₦ 195,000.00₦ 200,000.00Buy nowC-TEC CFP AlarmSense 2 Zone Two-Wire Fire Alarm Panel
₦ 195,000.00₦ 200,000.00 -
-
Firebeam Xtra 70KIT140 Mid-range Extension Kit 70-140 metres
For distances of 70 to 140 metres you will need to use the standard firebeam and a mid-range extension kit (the mid-range kit comes with a backing plate and 3 extra reflectors, you will need to add the reflector from the standard kit to the mid-range kit with the screws provided).
₦ 100,000.00Buy now -
ZT-500EX Zeta ATEX Approved Triple IR (IR3) Flame Detector
-
- Triple IR Spectrum – for longer distance detection and high false alarm immunity
- Compact and lightweight design
- User Selectable (Senitivity/Functions)
- Multiple output options
- Relays for Alarm and Fault
- 0-20mA (stepped)
- RS-485/RS-232 spectrum monitoring
- Lower power requirement (35mA – standby / 75mA – alarm)
- Ex cable gland /2 metre cable assembled & provided for users’ easy installation
- Certifications
- ATEX approved by DNV for explosion-proof
- CE marking
- Certifications
₦ 350,000.00Buy now -
-
ZT-20EX Zeta ATEX Approved UV/IR Flame Detector
-
- Triple IR Spectrum – for longer distance detection and high false alarm immunity
- Compact and lightweight design
- User Selectable (Senitivity/Functions)
- Multiple output options
- Relays for Alarm and Fault
- 0-20mA (stepped)
- RS-485/RS-232 spectrum monitoring
- Lower power requirement (35mA – standby / 75mA – alarm)
- Ex cable gland /2 metre cable assembled & provided for users’ easy installation
- Certifications
- ATEX approved by DNV for explosion-proof
- CE marking
- Certifications
-
-
Zeta Triple IR Flame Detector ZT-30P
-
- Triple IR Spectrum – for longer distance detection and high false alarm immunity
- Compact and lightweight design
- User Selectable (Senitivity/Functions)
- Multiple output options
- Relays for Alarm and Fault
- 0-20mA (stepped)
- RS-485/RS-232 spectrum monitoring
- Lower power requirement (35mA – standby / 75mA – alarm)
- Ex cable gland /2 metre cable assembled & provided for users’ easy installation
- Certifications
- ATEX approved by DNV for explosion-proof
- CE marking
- Certifications
-
