Analog fire alarm system operate by receiving signal from single cable that connects all of the detection units. The systems interact with the control panels via a single continuous line that connects all equipment. It decreases the risk of wiring problems.
This increased trustworthiness ensures that no false alarms, unnecessary evacuations, or emergency procedures disrupt business operations. When an Analog fire system’s fire alarm goes off, residents can respond appropriately and without hesitation. The single wire connection feature has a number of advantages for the maintenance and efficiency of the fire alarm system.
Adding or removing alarms throughout a facility, the singular wiring enables for smoother and faster installations. This helps to keep installation labor expenditures to a minimum.
-
ZETA PurCheck – Non-Flammable Smoke Detector Test Spray HO-30S
- The only totally non-flammable testing product available, and an alternative to SmokeCheck®
- Meets all NFPA 72 and International Fire Codes
- 100% EPA compliant with no HFCs or CFCs
- Effective: 300+ tests per can
- UL and ULC Listed
- Safe on sensors
-
Zeta ZAIO/230 Mains IO 1 Channel Input/Output Module – Fyreye MKII Protocol – 8A @ 230V AC
The Mains IO Modules are fully monitored loop powered devices which permit the interfacing of third-party equipment with the Fire Alarm Control panel using normally open dry contact connections.
-
Zeta ZIOU/230 Interface Module Loop Powered (5.0A Rating)
The Mains IO Modules are fully monitored loop powered devices which permit the interfacing of third-party equipment with the Fire Alarm Control panel using normally open dry contact connections.
-
Gent Bacnet Gateway Din Rail Mounting Kit for Mains Powered Interfaces S4-344402/12 (VIG-BNG-DINKIT)
Gent VIG-BNG-DINKIT Bacnet Gateway Din Rail Mounting Kit for Mains Powered Interfaces S4-344402/12
The BACNET-GW-3 provides an interface between NOTIFIER’s fire panel network (either the standard or the high-speed version) and a network using the BACnet/IP communication protocol.
BACnet protocol is an American National Standard (ANSI/ASHRAE 135-1995). With the Gateway inter- face, devices on NFN fire alarm control panels are represented as BACnet objects to the BACnet client.
₦ 450,000.00Buy nowGent Bacnet Gateway Din Rail Mounting Kit for Mains Powered Interfaces S4-344402/12 (VIG-BNG-DINKIT)
₦ 450,000.00 -
Gent Interface Programmer for S4 Interfaces on Old Systems (S4-INTERFACE-PROG)
The S4-INTERFACE-PROG kit can be used to program the S4-Interface units to simulate legacy 344XX range of interface units. This allows the S4 interface units to be used in place of old interfaces without the need to upgrade or re-commission the system.
-
Gent VSINTM-PCB-UPG Replacement Card for Mains Powered Interface-34440
Gent VSINTM-PCB-UPG Replacement Card for Mains Powered Interface (34440)
The VSINTM-PCB-UPG is a Replacement Card for Mains Powered Interface (34440).
₦ 635,000.00Buy now -
Gent Mains Powered Interface 12.0Ah Standby (including Batteries)- S4-34440-12
The Gent Mains powered interface 12.0Ah units (Part No’s: S4-34440-02 and S4-34440-12) are EN54-4 compliant battery-backed power supplies that can be directly connected to the Vigilon and Nano loop and also have highly flexible interfacing capability.
The 4 channels can be individually configured to provide Output and Input interfaces in various configuration modes, to control external equipment, and receive input to allow the fire system to make decisions and take actions. It is now possible to have combined inputs and outputs giving a total of 8 external circuits connected (e.g. 4 sector outputs and 4 confirmation inputs).
The units have room to accommodate optional modules onto DIN rails. It has a configurable auxiliary power output that is derived from its self-contained mains power supply unit, which is battery backed to continue to deliver power in the event of mains supply failure.
₦ 1,470,000.00Buy now -
Gent Mains Powered 4-Channel Interface 2.0Ah – S4-34440-02
Gent Mains Powered 4-Channel Interface – S4-34440-02
The Gent Mains powered 4-Channel interface units (Part No’s: S4-34440-02 and S4-34440-12) are EN54-4 compliant battery backed power supplies that can be directly connected to the Vigilon and Nano loop and also have highly flexible interfacing capability.
The 4 channels can be individually configured to provide Output and Input interface in various configuration modes, to control external equipment and receive input to allow the fire system to make decisions and take actions. It is now possible to have combined inputs and outputs giving a total of 8 external circuits connected (e.g. 4 sector outputs and 4 confirmation inputs).
The units have room to accommodate optional modules on to DIN rails. It has a configurable auxiliary power output that is derived from its self-contained mains power supply unit, which is battery backed to continue to deliver power in the event of mains supply failure.
₦ 480,000.00Buy now -
Gent S4 O2-HCO Dual Optical Heat-Sensor Voice Sounder High Power White VAD – S4-911-V-VAD-HPW
DESCRIPTION
Gent S4 CO Dual Optical Heat Sensor Voice Sounder High Power White VAD – S4-911-V-VAD-HPW
The S-Quad range of multifunction devices includes sensors with sounder, speech and EN54-23 certified visual alarms. This allows the maximum flexibility for designers providing cover for a building. The advanced sensing technology is enhanced with a device that can alert building occupants with a highly visible visual alarm and a recorded voice message to ensure all occupants are alerted to an emergency.
Innovative design has allowed the LED visual alarm to be built into the centre of the sensor with the sounder and speech circuits inside providing a neat and aesthetic solution to multi-function devices.
₦ 79,000.00Buy nowGent S4 O2-HCO Dual Optical Heat-Sensor Voice Sounder High Power White VAD – S4-911-V-VAD-HPW
₦ 79,000.00 -
Gent Dual Optical LP Heat-Sensor Voice Sounder Red VAD -(S4-711-V-VAD-LPR )
DESCRIPTION
The S4-711-V-VAD-LPR Dual Optical Heat Sensor with Voice and Low Power Red VAD is a Gent Vigilon S-Quad sensor with a unique combination of sensing elements to provide quick, intelligent fire decisions. Smoke detection is enhanced using patented dual optical scatter technology. This allows it to be configured to filter specific risks such as steam and dust, resulting in significantly reduced false alarms.
The S4-711-V-VAD-LPR also provides a cost effective solution for alarm signalling.
₦ 59,000.00Buy now -
Gent Dual Optical Heat&CO Sensor (S4-901)
Gent S4-901 CO Dual Optical Heat Sensor
A new concept in fire detection – a truly intelligent analogue sensor combining exceptional computing power in the sensor as well as the panel to achieve an extremely fast response to a real fire whilst minimising the risk of false alarms.
₦ 75,000.00Buy nowGent Dual Optical Heat&CO Sensor (S4-901)
₦ 75,000.00 -
Gent Dual Optical Heat-Detector White-(S4-711)
DESCRIPTION
Gent S4-711 Dual Optical Heat Detector
The S4-711 is specifically designed to be used with the Gent Vigilon range of Analogue Addressable Control Panels. This detector is a Dual Optical Type Analogue Addressable Smoke Detector combined with a Heat Detection Element. This product requires a Gent S4-700 base for mounting.
A truly intelligent analogue sensor combining local processing in the sensor and the panel to achieve an immediate response to real fires whilst minimising the risk of false alarms.
₦ 45,000.00Buy nowGent Dual Optical Heat-Detector White-(S4-711)
₦ 45,000.00
