Control panels connect detectors, alarms, suppression systems, and monitoring stations to communicate fire detection and response signals.
Control panel activate visual, audio, and occasionally other forms of notification equipment to alert residents of an emergency situation.
There are two kinds of fire panels available today: Addressable fire alarm panel vs. conventional fire alarm panel. A conventional fire alarm control panel employs one or more circuits, connected to initiating devices wired in parallel. Addressable panels are more advanced than traditional panels, with greater information capacity and control flexibility.
Voice evacuation panels are another type of fire alarm control panel. Designed to provide outputs for speakers in the system.
A fire suppression system will be installed on important and valuable structures. The panel notifies a monitoring center of the alarm status, and people at the receiving location decide what to do next. The panel controls HVAC systems, building automation controls, access points, and elevators to isolate the fire or route workers.
-
-
C-TEC CFP AlarmSense 2 Zone Two-Wire Fire Alarm Panel
-
Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB).
-
Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
-
Manufactured by C-TEC in the UK.
-
Two AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points, sounders and visual indicators.
-
Four conventional sounder circuits.
-
Integral 1.5A EN54-4/A2 compliant switch mode PSU.
-
Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
-
Two on-board relays (Fire and Fault).
-
Two open-collector outputs (Remote and Reset).
-
‘Class change’ and alert inputs.
-
Installer-friendly design.
-
Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
-
Low 25mA quiescent current.
-
Multiple indicators.
-
System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system).
-
Space for two x 12V 3.3Ah VRLA batteries.
₦ 195,000.00₦ 200,000.00Buy nowC-TEC CFP AlarmSense 2 Zone Two-Wire Fire Alarm Panel
₦ 195,000.00₦ 200,000.00 -
-
CTEC ZPF Network – fire alarm networking solution
🔹 Smart Network Technology
🔹 Scalable Architecture for Large Sites
🔹 Compatible with Addressable Systems
🔹 Reliable Performance in Critical EnvironmentsIdeal for hospitals, schools, commercial buildings, and industrial environments, the CTEC ZPF Network ensures real-time alerts, fault tolerance, and easy system expansion.
₦ 194,775.00₦ 199,775.00Buy nowCTEC ZPF Network – fire alarm networking solution
₦ 194,775.00₦ 199,775.00 -
Gent Xenex 13271-08LB 8 Zone Conventional Repeater Panel
The Gent Xenex 13271-08LB repeater panel is for use with the Xenex range of control panels. Compatible with the 2,4 or 8 zone Xenex panel the repeater offers full system control and indication from a remote location within the building.
₦ 172,000.00Buy now -
🛡️ Orisong/Concept Plus 6-Zone Fire Alarm Control Panel
✔️ Independent 6-zone control
✔️ Clear status indication & quick fault detection
✔️ Easy integration with existing alarm systems
✔️ Durable build, user-friendly interfaceUpgrade your fire safety system today with smart, scalable protection.
₦ 135,450.00₦ 137,450.00Buy now🛡️ Orisong/Concept Plus 6-Zone Fire Alarm Control Panel
₦ 135,450.00₦ 137,450.00 -
🛡️ Orisong/Concept Plus 4-Zone Fire Alarm Control Panel
✔️ Easy to install and operate
✔️ Robust performance with high sensitivity
✔️ LED indicators for real-time zone status
✔️ Trusted for offices, schools, stores, and residential buildingsProtect what matters. Choose performance you can trust.
₦ 130,200.00₦ 132,200.00Buy now🛡️ Orisong/Concept Plus 4-Zone Fire Alarm Control Panel
₦ 130,200.00₦ 132,200.00 -
₦ 120,000.00
₦ 125,000.00Buy nowC-Tec FP 8 Zone Conventional Fire Alarm Panel-Ff388-2
₦ 120,000.00₦ 125,000.00 -
CTEC 8-Zone Motherboard – Fire Alarm Control
✅ Easy installation
✅ Compatible with CTEC fire alarm panels
✅ Reliable zone monitoring & fault detection
✅ Built to meet international safety standards₦ 119,700.00₦ 123,700.00Buy nowCTEC 8-Zone Motherboard – Fire Alarm Control
₦ 119,700.00₦ 123,700.00 -
CTEC 4 Zone Motherboard – Fire Alarm Control
✅ Key Features:
-
Supports 4 independent fire alarm zones
-
Easy integration with CTEC fire panels
-
High-quality, durable components
-
LED indicators for fault and fire status
-
Cost-effective and compliant with EN54 standards
Perfect for schools, offices, shops, warehouses, and residential complexes!
₦ 113,925.00₦ 115,925.00Buy nowCTEC 4 Zone Motherboard – Fire Alarm Control
₦ 113,925.00₦ 115,925.00 -
-
C-TEC XFP Network Card
✅ Simple plug-in design
✅ Reliable and secure RS485 networking
✅ Real-time status sharing between panels
✅ Cost-effective for scalable installationsStay compliant. Stay connected. Stay protected.
Choose the C-TEC XFP Network Card — Because Every Second Counts.₦ 113,925.00₦ 115,925.00Buy nowC-TEC XFP Network Card
₦ 113,925.00₦ 115,925.00 -
C-TEC 2 Zone Motherboard – fire alarm control panel
✅ Key Features:
-
Supports 2 independent fire alarm zones
-
Compatible with C-TEC conventional fire alarm panels
-
Easy installation and maintenance
-
Reliable performance for residential and commercial use
-
Fully compliant with fire safety standards
Whether you’re replacing a faulty board or building a new system, the CTEC 2 Zone Motherboard delivers the reliability and control you need to keep lives and property safe.
₦ 107,100.00₦ 109,100.00Buy nowC-TEC 2 Zone Motherboard – fire alarm control panel
₦ 107,100.00₦ 109,100.00 -
-
12V 21Ah Rechargeable Battery – fire alarm panels
Ideal for inverters
CCTV systems
fire alarm panels
access control
emergency lighting
₦ 68,250.00₦ 70,250.00Buy now12V 21Ah Rechargeable Battery – fire alarm panels
₦ 68,250.00₦ 70,250.00