Category: Conventional Fire Alarm System

Showing 81–96 of 270 results

• Sale!

  wishlist

  C-Tec FP 8 Zone Conventional Fire Alarm Panel-Ff388-2

  ₦125,000.00 ₦120,000.00

  C-Tec CFP 8 Zone Conventional Fire Alarm Panel Ff388-2   Ff388-2 certified to EN54-2/4, C-TEC’s CFP 8 zone conventional fire alarm panel offers an array of user and installer-friendly features at a very competitive price. Supplied in an attractive flush or surface mountable plastic enclosure, it includes two detector zones, four conventional sounder circuits, class change …

  C-Tec FP 8 Zone Conventional Fire Alarm Panel-Ff388-2Read More

  Add to cart
• 

  wishlist

  C-TEC FP 8 Zone Economy Conventional Fire Alarm Panel Part No. FF388-3

  ₦120,000.00

  • • • Installer-friendly design.
      • Robust metal enclosure c/w lift off lid & heavy-duty base connections.
      • Eight conventional Zone circuits.
      • Two conventional Sounder circuits.
      • Separate indicators for open & short circuit fault, sounder fault and battery/power supply fault.
      • Non-latching class change sounder output, latching fire & non-latching fault outputs (via expansion loom).
      • Short circuit=fire facility (pre-1980 BS, no resistors in call points, selectable on a zone by zone basis).
      • Ancillary connections for repeaters & other system add-ons including fault relay modules, fire relay modules, sounder delay relay modules, sounder extender kits, etc).
      • Multi-lingual variants (subject to quantities).
      • Space for 2 x 12V 3.2Ah VRLA batteries.
      • Compatible with virtually all known conventional fire detectors including C-TEC’s ActiV range.
      • Designed to comply with BS 5839-4 (this panel in not compliant with EN54-2/4 and should NOT be used in new UK or European installations).
      • Download datasheet

  Add to cart
• 

  wishlist

  C-TEC Manual ‘Crack Glass’ Call Point, surface Part No. BF370R

  • Certified to EN54 Part 11 (LPCB/VdS).
  • Unique ‘Plug & Play’ installation concept.
  • Supplied with a non-breaking plastic resettable element.
  • Includes a 470Ω resistor, test key and red back box.
  • Anti-Tamper facility.
  • Flush version (without a red back box) also available (order code BF370MFR).

  • Download datasheet

  Read more
• 

  wishlist

  C-TEC Manual ‘Crack Glass/No Break’ Call Point, flush/surface Part No. BF370FR

  • Certified to EN54 Parts 11 (LPCB) and 13 (BSI).
  • ‘Universal’ design combines multiple functions into one product, simplifying selection and reducing stock variants.
  • Supplied with a glass AND plastic element, a 470Ω AND 680Ω resistor and a red surface mounting back box which can be optionally discarded if flush mounting.
  • Quick visible alarm indication.
  • Changeover contacts.
  • IP24 rated.

  • Download datasheet

  Read more
• 

  wishlist

  C-TEC Manual ‘No Break’ Call Point, surface Part No. BF370MR

  • Certified to EN54 Part 11 (LPCB/VdS).
  • Unique ‘Plug & Play’ installation concept.
  • Supplied with a non-breaking plastic resettable element.
  • Includes a 470Ω resistor, test key and red back box.
  • Anti-Tamper facility.
  • Flush version (without a red back box) also available (order code BF370MFR).

  • Download datasheet

  Read more
• 

  wishlist

  C-TEC Manual ‘No Break’ Call Point, surface Part No. BF370S

  ₦5,500.00

  • • Certified to EN54 Parts 11 (LPCB) and 13 (BSI).
    • Smooth-action resettable element mimics the feel of breaking glass.
    • Supplied with a red back box, reset key and ‘Not in Use’ label.
    • Red LED ‘alarm ring’ illuminates call point face upon activation.
    • Photoluminescent operating window remains visible for up to 5 minutes.
    • Note an additional BF370SFP red flush mounting plate is required if you wish to flush mount the BF370S.
    • IP66 weatherproof version (order code BF370S/W) also available.
    • Download datasheet

  Add to cart
• 

  wishlist

  C-TEC Manual IP67 ‘Crack Glass’ Call Point, surface Part No. BF370/W

  • Certified to EN54 Part 11 (LPCB/VdS).
  • Weather resistant and sealed to IP67.
  • Ideal for use in external environments where water and dirt are likely to be present.
  • Unique ‘Plug & Play’ installation concept.
  • Supplied with a glass element.
  • Includes a 470Ω resistor and test key.
  • Anti-Tamper facility.
  • Wide -25ºC to +70ºC operating range.

  • Download datasheet

  Read more
• 

  wishlist

  C-TEC MARINE ISOLATOR BASE [SIL2] 45681-211MAR

  The Marine Isolator Base is unique and designed to only accept the marine isolator.

  Read more
• 

  wishlist

  C-TEC Output Expansion Relay Board Part No. EP212

  • • An optional system expansion device for use with the EP203 three zone automatic extinguisher panel.
    • Mounts inside the EP203 panel to provide five volt free relay contacts (reset, mode, discharged, hold and abort).
    • Reset relay switches during the panel’s reset cycle.
    • Mode relay switches when the extinguishant system’s mode is changed to manual.
    • Discharged relay switches when a released flow switch input (e.g. from the extinguishant pipework) is received to indicate the extinguishant has been released.
    • Hold relay switches when a hold input is received at the panel. If the panel is in 2nd stage alarm (i.e. it is in automatic mode and detection circuits are activated, or it is in either automatic/manual mode and a manual release input is operated) the extinguishant release sequence is halted.
    • Abort relay switches when an abort input is received at the panel to cancel the extinguishant release sequence.

  Read more
• 

  wishlist

  C-TEC Red Plastic Fire Panel Key

  • A spare plastic S-KEY for use C-TEC’s CFP, XFP and ZFP fire panels.
  • Provides authorised users with access to a fire panel’s authorised user controls.
  • Finished in red polycarbonate for extra strength.
  • See tech. specs below for full panel compatibility details

  Read more
• 

  wishlist

  C-TEC Remote LED Indicator Part No. BF318

  • A high-quality remote LED indicator specifically designed for use in fire alarm systems.
  • Incorporates a high intensity, wide-angle red LED which is clearly visible from the front of the plate when active.
  • Ideal for indicating the activation of hidden or out of-sight fire detectors, etc.
  • Includes a white ‘write on’ area allowing installers to add equipment locations.
  • Fits on standard UK 16mm flush or surface mount back boxes.
  • Download datasheet

  Read more
• 

  wishlist

  C-TEC Remote Status Unit, Surface Part No. EP210S

  • • • • DESCRIPTION
        • Designed to connect to the RS485 terminals on an EP203 Automatic Extinguisher Panel to provide remote system status indication via a 128 x 64 pixel LCD status display.
        • Also includes a pull-down manual release button, a mode (auto/manual) keyswitch and a wide range of system status indicators.
        • Three monitored input connections (Hold, Abort and Mode).
        • Max. 8 remote status units per EP203 panel.
        • Surface remote status units (EP210S) and weather proof enclosures (BF359/1) also available.
        • Download datasheet

  Read more
• 

  wishlist

  C-TEC Single Gang Locking Jack Socket for BF320 Part No. BF320JP

  • Can be used in conjunction with a BF320 vibrating pillow pad to warn the hearing impaired of a potential fire alarm or evacuation alert condition.
  • Compatible with all C-TEC fire alarm and evacuation alert systems.
  • Locking mini-XLR connector and plug arrangement helps prevent accidental pillow pad removal.
  • Line monitored for disconnection via an internal 6k8Ω end of line resistor (selectable at the BF320JP).
  • Selectable 6K8 (pillow pad) or 27K (jack socket) end of line monitoring options for fire alarm or evacuation alert system use.
  • Can be used on systems with a 10-30V DC voltage range
  • Fits on a standard UK 25mm back box.

  • Download datasheet

  Read more
• 

  wishlist

  C-TEC Single Gang Surface Interface Plate, deep (25mm) Part No. NCP-24

  • Allows standard UK single gang plated products to be fixed to most European style back boxes (square and round variants).
  • Adapts to most European fixing centres – see video for further details.
  • Multiple variants available – options include single gang shallow (NCP23), single gang deep (NCP24), double gang shallow (NCP25) and double gang deep (NCP26).
  • Designed to match C-TEC’s existing plastics and colours.
  • Tough and durable.
  • Can also be surface mounted directly to a wall.

  • • Download datasheet

  Read more
• 

  wishlist

  C-TEC Single Gang Surface Interface Plate, shallow (20mm) Part No. NCP-23

  • • • • Allows standard UK single gang plated products to be fixed to most European style back boxes (square and round variants).
        • Adapts to most European fixing centres – see video for further details.
        • Multiple variants available – options include single gang shallow (NCP23), single gang deep (NCP24), double gang shallow (NCP25) and double gang deep (NCP26).
        • Designed to match C-TEC’s existing plastics and colours.
        • Tough and durable.
        • Can also be surface mounted directly to a wall.

         

        • Download datasheet

  Read more
• 

  wishlist

  C-TEC Sounder Isolator Module (max. 30 per BF365SC) Part No. BF365IM

  • A fault isolating module with sounder drive capability designed to meet requirement 17.9.2c of Dutch standard NEN2575.
  • BSI certified to EN54 parts 17 & 18.
  • Measures just 55mm x 55mm x 16mm (will fit in the base of most conventional sounders).
  • Up to 30 BF365IM modules per BF365SC controller.
  • Allows low-cost, non-fire resistant sounder circuit cabling to be used when used in conjunction with our BF365SC Sounder Isolator Controller (subject to fire officer approval).
  • Wiring must be made in a loop arrangement, beginning and ending at the controller.
  • If a wiring fault should occur, the Module(s) nearest to the faulty section of cabling will, if needed, isolate this section. As the Modules are driven from each direction, any loss of cable integrity will have no effect on the functionality of the actual sounders.

  • Download datasheet

  Read more