A fire alarm system notifies us of an emergency, to take action to protect ourselves, our employees, and the general public.
Fire detection systems identify fire early when there is still enough time for inhabitants to safely evacuate. Control actions begin while the fire is still minor, early detection helps to reduce property loss and operational disruption. Fire alarm systems transmit information about the location of the fire to emergency responders, speeding up the firefighting procedure.
Sounders go off to warn those within the building that there may be a fire. The fire alarm system could include a remote signal system. It would then notify the fire department via a central station.
- You cannot add that amount of "C-TEC CFP AlarmSense 4 Zone Two-Wire Fire Alarm Panel" to the cart because there is not enough stock (0 remaining).
-
GENT VCS-ODOOR-PLUS – REPLACEMENT OUTER DOOR FOR VIGPLUS-24/72 (BLACK)
The Gent VCS-ODOOR-PLUS is a spare / replacement black outer door assembly for use with the Gent Vigilon Compact Plus panel.
Key Features
- Supplied in Black
₦ 190,000.00 -
Gent S4-34760-15 1.5m Venturi Tube
Gent S4-34760-15 1.5m Venturi Tube
The S4-34760-15 is a Venturi Tube designed for use with Duct Smoke Sensors.
₦ 190,000.00₦ 195,000.00Gent S4-34760-15 1.5m Venturi Tube
₦ 190,000.00₦ 195,000.00 -
C-TEC CFP AlarmSense 2 Zone Two-Wire Fire Alarm Panel
-
Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB).
-
Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
-
Manufactured by C-TEC in the UK.
-
Two AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points, sounders and visual indicators.
-
Four conventional sounder circuits.
-
Integral 1.5A EN54-4/A2 compliant switch mode PSU.
-
Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
-
Two on-board relays (Fire and Fault).
-
Two open-collector outputs (Remote and Reset).
-
‘Class change’ and alert inputs.
-
Installer-friendly design.
-
Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
-
Low 25mA quiescent current.
-
Multiple indicators.
-
System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system).
-
Space for two x 12V 3.3Ah VRLA batteries.
₦ 195,000.00₦ 200,000.00C-TEC CFP AlarmSense 2 Zone Two-Wire Fire Alarm Panel
₦ 195,000.00₦ 200,000.00 -
-
Gent VS-SPARE-24 Replacement Spares Pack for Vigilon Control Panels – VIGPLUS-24 & VIGPLUS-72
Gent VS-SPARE-24 Replacement Spares Pack for Vigilon Control Panels – VIGPLUS-24 & VIGPLUS-72
The VS-SPARE-24 is a Replacement Spares Pack for Vigilon Control Panels – VIGPLUS-24 & VIGPLUS-72.
₦ 195,000.00 -
ZETA Smart Connect Multiloop Card Module(MKII)
The SCM-MIM is a six input module that is
designed to be DIN mounted inside of a Smart
Connect Multiloop control panel. It’s powered
and interfaced to the Smart Connect Multiloop
via a RJ45 connection.₦ 195,500.00₦ 205,000.00ZETA Smart Connect Multiloop Card Module(MKII)
₦ 195,500.00₦ 205,000.00 -
Gent S4-34760-99 S-Quad Duct Mounting Bracket
Gent S4-34760-99 S-Quad Duct Mounting Bracket The S4-34760-99 is a Mounting Bracket designed for the S-Quad Duct Smoke Sensor.
₦ 196,500.00₦ 200,000.00Gent S4-34760-99 S-Quad Duct Mounting Bracket
₦ 196,500.00₦ 200,000.00 -
GPS320 Guard Patrol Tour Stick with LED Light
🔐 Key Features:
*Bright LED light to assist with nighttime or dark-area patrols
*Rugged, waterproof, and impact-resistant design built for real-world conditions
*Fast data transfer via USB with clear reporting for supervisors
*Simple one-button RFID checkpoint scans
*Long-lasting rechargeable battery for extended patrol shifts
*Tamper-proof system for guaranteed authenticity of guard routes—
Why Choose the GPS320 Guard Tour System?
With real-time tracking and reliable data capture, the GPS320 helps you manage guard movements, reduce supervision workload, and improve response time. It’s trusted by security professionals across Nigeria for its durability, accuracy, and ease of use.
₦ 199,500.00₦ 209,000.00GPS320 Guard Patrol Tour Stick with LED Light
₦ 199,500.00₦ 209,000.00 -
Gent VIG-NC-V3+ Network Card V3+
Gent VIG-NC-V3+ Network Card V3+
This network card is used to allow messages of status and control data to pass between control panels and network (or terminal) nodes in a networked fire system. The card must be plugged into the backplane of each panel and node in a dedicated slot. When it is plugged into the slot P8 on the backplane the external cables must be connected to terminal block P10, which is also located on the backplane. The dual-in-line switches on the card are set to program the address number and baud rate.
₦ 206,000.00Gent VIG-NC-V3+ Network Card V3+
₦ 206,000.00 -
C-TEC CFP AlarmSense 4 Zone Two-Wire Fire Alarm Panel
-
Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB).
-
Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
-
Manufactured by C-TEC in the UK.
-
Two AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points, sounders and visual indicators.
-
Four conventional sounder circuits.
-
Integral 1.5A EN54-4/A2 compliant switch mode PSU.
-
Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
-
Two on-board relays (Fire and Fault).
-
Two open-collector outputs (Remote and Reset).
-
‘Class change’ and alert inputs.
-
Installer-friendly design.
-
Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
-
Low 25mA quiescent current.
-
Multiple indicators.
-
System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system).
-
Space for two x 12V 3.3Ah VRLA batteries.
₦ 222,000.00₦ 250,000.00C-TEC CFP AlarmSense 4 Zone Two-Wire Fire Alarm Panel
₦ 222,000.00₦ 250,000.00 -
-
CTEC 2 Zone Plastic Fire Alarm Control Panel
✅ Cost-effective and user-friendly
✅ Supports conventional fire alarm systems
✅ LED indicators for easy monitoring
✅ Fully compliant with BS EN54 standards
✅ Compact and lightweight design for easy installationWhether you’re upgrading an existing system or installing a new one, the CTEC 2 Zone Fire Alarm Panel delivers unmatched performance and peace of mind.
₦ 223,125.00₦ 233,750.00CTEC 2 Zone Plastic Fire Alarm Control Panel
₦ 223,125.00₦ 233,750.00 -
₦ 223,650.00
₦ 234,300.00AH Infrared Flame Detector, 2 wire
₦ 223,650.00₦ 234,300.00 -
Zeta 4 Zone Fire Alarm Control Panel Motherboard
Key Features:
-
Supports up to 4 independent fire detection zones
-
Reliable alarm signal processing for faster response
-
Easy integration with detectors, sounders, and call points
-
LED indicators for real-time zone status
-
Built with industrial-grade components for long-term reliability
₦ 231,000.00₦ 236,000.00Zeta 4 Zone Fire Alarm Control Panel Motherboard
₦ 231,000.00₦ 236,000.00 -
chat with us