A fire alarm system notifies us of an emergency, to take action to protect ourselves, our employees, and the general public.
Fire detection systems identify fire early when there is still enough time for inhabitants to safely evacuate. Control actions begin while the fire is still minor, early detection helps to reduce property loss and operational disruption. Fire alarm systems transmit information about the location of the fire to emergency responders, speeding up the firefighting procedure.
Sounders go off to warn those within the building that there may be a fire. The fire alarm system could include a remote signal system. It would then notify the fire department via a central station.
-
SOLO100-001- Fibreglass 4 Section Telescopic Pole – 4.5 metres
Telescopic extension for plastic telescopic rod (Part No. 060427). Up to 3 telescopic extensions
can be attached to the telescopic rod. The maximum height that can be reached is increased to 9
m.₦ 475,000.00₦ 520,000.00SOLO100-001- Fibreglass 4 Section Telescopic Pole – 4.5 metres
₦ 475,000.00₦ 520,000.00 -
Zeta Beam Xtra Motorised Reflective Beam Smoke Detector c/w extender Kit
DESCRIPTION
Developed to overcome the problems of
old outdated technology in beam detection,
this motorised beam now means that beam
detection can be used reliably to produce cost
effective solutions for protecting large open
areas.₦ 504,500.00₦ 550,000.00Zeta Beam Xtra Motorised Reflective Beam Smoke Detector c/w extender Kit
₦ 504,500.00₦ 550,000.00 -
Zeta Loop Module/Card for Fire Alarm System
Key Features:
-
Supports multiple addressable devices on a single loop
-
Simplifies installation and reduces cabling costs
-
Designed for seamless integration with Zeta addressable control panels
-
Built-in diagnostics for easy system monitoring and troubleshooting
-
Reliable performance in demanding environments
₦ 510,825.00₦ 535,150.00Zeta Loop Module/Card for Fire Alarm System
₦ 510,825.00₦ 535,150.00 -
-
Gent VIG-FLUSH-SS Vigilon Main Control Panel Flush Mounting Kit (Stainless Steel)
Gent VIG-FLUSH-SS Vigilon Main Control Panel Flush Mounting Kit (Stainless Steel)
Gent VIG-FLUSH-SS Vigilon Main Control Panel Flush Mounting Kit
₦ 540,000.00 -
C-TEC EP203 Automatic Extinguisher Panel Part No. EP203
-
Technical Specifications
-
Approvals/certifications Certified to EN12094-1 and EN54-2 & 4 by the LPCB.
-
Mains supply 230V 50/60Hz.
-
Mains rated current 810mA max.
-
Internal power supply 19V-28.5V (27V nominal). Ripple 7V maximum (battery fault).
-
Total output current limited to 1.5A @ 230Vac continuous, 3A peak (ImaxA eq 800mA).
-
Quiescent current 40mA (on mains fail). Zone quiescent 2mA max.
-
Max battery size and type 2 x 12V 7Ah VRLA connected in series.
-
No. of detector zone circuits 3 @ 19-28Vdc (Max. length per circuit is 250m).
-
Max. devices per detector zone 20 detectors (or 32 detectors/manual call points combined).
-
No. of conventional sounder circuits 3 (two x 1st stage; one x 2nd stage). Max. length per circuit is 50m).
-
EOL resistor value 6800 5% Tol. 0/25W (blue, grey, red, gold).
-
Max. sounder output current 3 x 200mA.
-
Auxiliary relays Six: (1) Fire; (2) Local Fire; (3) Extract Fan; (4) 1st Stage; (5) 2nd Stage; (6) Fault. Volt free single pole
changeover. Max. switch current 1A; Max. switch voltage 30Vdc. Five additional relays available via
EP212 relay card.
Other outputs Extinguishant release (21-28Vdc, rated at 1A for 5 mins). Programmable to delay by 0-60 seconds; to
be active for 1-300 seconds and to flood for 60-1800 seconds.
Auxiliary inputs Six: (1) Manual Release; (2) Flow Switch; (3) Low Pressure; (4) Mode; (5) Hold; (6) Abort. 8K-2K normal;
1.8K-200 active; 150-0 short circuit. EOL value: 6K8 +/-5%, 0.25W.
Indicators Multiple indicators are provided – refer to the EP203 instructions for details.
Controls Extinguishant release (housed in yellow casing); Accessed keyswitch; Operation keyswitch (Manual
only or Manual & Auto); Buttons for Menu; Silence internal sounder; reset panel; silence/resound
sounders and scrolling.
Expansion connections Yes – for up to 8 x Remote status units (2 wire RS485 + 2 wire power) and/or up to 8 x Ecomomy
status units (2 wire power + 2 wire mode select).
Product dimensions (mm) 439 W x 276 H x 70 D mm (back box); 467 W x 293 H x 29 D mm (lid).
Construction & finish Metal back box; metal chassis’ plastic lid.
IP Rating IP30.
Weight 4.2kg (without batteries).
Operating conditions/temperature -5°C to +40°C. Max relative humidity: 95%
₦ 570,000.00₦ 600,000.00C-TEC EP203 Automatic Extinguisher Panel Part No. EP203
₦ 570,000.00₦ 600,000.00 -
-
Gent Beam Sensors Pair (Transmitter And Receiver), Excluding Bracket and Base (S4-34740)
Gent S4-34740 Addressable Beam Sensor Pair
Gent S4-34740 S-Quad Addressable Loop Powered Beam Sensors Pair provides an enhanced solution for linear beam detection for applications where point detection is either not practical or economic.
₦ 580,000.00₦ 660,000.00Gent Beam Sensors Pair (Transmitter And Receiver), Excluding Bracket and Base (S4-34740)
₦ 580,000.00₦ 660,000.00 -
C-TEC 1 Loop Repeater Panel
Key Functions & Advantages:
✅ Real-Time Fire System Replication – Mirrors the main panel to deliver instant updates on alarms, faults, and system status.
✅ User-Friendly Interface – Intuitive LED display and controls make system monitoring and interaction simple.
✅ Remote Monitoring – Perfect for use in remote areas of large buildings or multiple access points.
✅ Secure Access – Equipped with key-operated controls to prevent unauthorized use.
✅ Seamless Integration – Compatible with C-TEC’s renowned range of fire alarm systems, ensuring full interoperability.
✅ Compact & Stylish – Sleek design that fits into modern architectural environments without taking up space.
✅ Cost-Effective Expansion – Reduces the need for multiple main panels while maintaining full oversight.₦ 589,575.00₦ 590,000.00C-TEC 1 Loop Repeater Panel
₦ 589,575.00₦ 590,000.00 -
Gent VIG-BSKIT Conversion Kit for VIG1-24 EN 54 to BS / V3+ Functionality
Gent VIG-BSKIT Conversion Kit for VIG1-24 EN 54 to BS / V3+ Functionality
The VIG-BSKIT is a Conversion Kit for VIG1-24 EN 54 to BS / V3+ functionality
₦ 610,000.00 -
CTEC 3+1 Extinguishing Panel – Fire Suppression Control
✅ Fully addressable and easy to install
✅ Compatible with multiple extinguishing agents
✅ Built-in timer delays and programmable inputs/outputs
✅ Clear LCD display with real-time status updates
✅ Approved to EN12094-1 standards💼 Perfect for: Data Centres | Plant Rooms | Electrical Cabinets | Server Hubs
₦ 610,575.00₦ 630,575.00CTEC 3+1 Extinguishing Panel – Fire Suppression Control
₦ 610,575.00₦ 630,575.00 -
Gent Xenex 2 Zone Conventional Fire Alarm Panel
FEATURES
-
-
Gent Xenex 13270-02LB
-
2 sounder circuits
-
1A sounder circuit max load
-
Conforms to EN54: parts 2 & 4
-
On-board relay
-
Fire and fault relay expansion card optional
-
Easy configuration
-
Class change input
-
₦ 624,750.00₦ 630,000.00Gent Xenex 2 Zone Conventional Fire Alarm Panel
₦ 624,750.00₦ 630,000.00 -
-
Gent 2 Zone Panel
Why Choose Gent Panels?
-
Proven Honeywell technology
-
Scalable for any building size
-
Long-term reliability and low maintenance
-
Seamless integration with voice alarms, smoke vents, and emergency lighting
From conventional setups to smart addressable systems – Gent has you covered.
👉 Ready to upgrade your fire safety? Visit safetechhub.com or contact us for professional advice and supply.₦ 624,750.00₦ 630,750.00Gent 2 Zone Panel
₦ 624,750.00₦ 630,750.00 -
-
Zeta Quatro Repeater Panel – fire alarm system upgrade
🔹 Key Features:
-
Full compatibility with Zeta addressable fire alarm panels
-
High-visibility LCD display for instant status updates
-
Easy setup with minimal wiring
-
Scalable for large installations
-
Certified and compliant with international fire safety standards
₦ 630,000.00₦ 660,000.00Zeta Quatro Repeater Panel – fire alarm system upgrade
₦ 630,000.00₦ 660,000.00 -
chat with us