A fire alarm system notifies us of an emergency, to take action to protect ourselves, our employees, and the general public.
Fire detection systems identify fire early when there is still enough time for inhabitants to safely evacuate. Control actions begin while the fire is still minor, early detection helps to reduce property loss and operational disruption. Fire alarm systems transmit information about the location of the fire to emergency responders, speeding up the firefighting procedure.
Sounders go off to warn those within the building that there may be a fire. The fire alarm system could include a remote signal system. It would then notify the fire department via a central station.
-
Gent VIG-NC-V3+ Network Card V3+
Gent VIG-NC-V3+ Network Card V3+
This network card is used to allow messages of status and control data to pass between control panels and network (or terminal) nodes in a networked fire system. The card must be plugged into the backplane of each panel and node in a dedicated slot. When it is plugged into the slot P8 on the backplane the external cables must be connected to terminal block P10, which is also located on the backplane. The dual-in-line switches on the card are set to program the address number and baud rate.
₦ 206,000.00Gent VIG-NC-V3+ Network Card V3+
₦ 206,000.00 -
C-TEC CFP AlarmSense 4 Zone Two-Wire Fire Alarm Panel
-
Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB).
-
Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
-
Manufactured by C-TEC in the UK.
-
Two AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points, sounders and visual indicators.
-
Four conventional sounder circuits.
-
Integral 1.5A EN54-4/A2 compliant switch mode PSU.
-
Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
-
Two on-board relays (Fire and Fault).
-
Two open-collector outputs (Remote and Reset).
-
‘Class change’ and alert inputs.
-
Installer-friendly design.
-
Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
-
Low 25mA quiescent current.
-
Multiple indicators.
-
System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system).
-
Space for two x 12V 3.3Ah VRLA batteries.
₦ 222,000.00₦ 250,000.00C-TEC CFP AlarmSense 4 Zone Two-Wire Fire Alarm Panel
₦ 222,000.00₦ 250,000.00 -
-
CTEC 2 Zone Plastic Fire Alarm Control Panel
✅ Cost-effective and user-friendly
✅ Supports conventional fire alarm systems
✅ LED indicators for easy monitoring
✅ Fully compliant with BS EN54 standards
✅ Compact and lightweight design for easy installationWhether you’re upgrading an existing system or installing a new one, the CTEC 2 Zone Fire Alarm Panel delivers unmatched performance and peace of mind.
₦ 223,125.00₦ 233,750.00CTEC 2 Zone Plastic Fire Alarm Control Panel
₦ 223,125.00₦ 233,750.00 -
₦ 223,650.00
₦ 234,300.00AH Infrared Flame Detector, 2 wire
₦ 223,650.00₦ 234,300.00 -
Zeta 4 Zone Fire Alarm Control Panel Motherboard
Key Features:
-
Supports up to 4 independent fire detection zones
-
Reliable alarm signal processing for faster response
-
Easy integration with detectors, sounders, and call points
-
LED indicators for real-time zone status
-
Built with industrial-grade components for long-term reliability
₦ 231,000.00₦ 236,000.00Zeta 4 Zone Fire Alarm Control Panel Motherboard
₦ 231,000.00₦ 236,000.00 -
-
CTEC 4 Zone Plastic Fire Alarm Panel
✅ EN54 compliant
✅ Sturdy plastic housing
✅ LED indicators for clear zone status
✅ Ideal for offices, schools, shops, and residential complexes🔥 Keep your property protected and stay compliant with industry standards.
📦 Now available for fast delivery.₦ 239,400.00₦ 250,800.00CTEC 4 Zone Plastic Fire Alarm Panel
₦ 239,400.00₦ 250,800.00 -
GENT 8 ZONE REPEAT INDICATOR, LESS BATTERIES (13271-08LB)
Gent 13271-08LB 8 Zone Xenex Conventional Fire Alarm Repeat Panel EN54 (Less Batteries)
BSI approved to EN54: Parts 2 & 4, the Xenex control panel can be used on installations meeting BS 5839:Part1. Control panel options for 2-8 zones can be specified.
Designed to simplify system installation, each Xenex panel contains an integral power supply and battery support to drive up to 8 alarm sounder circuits, 2 auxiliary relay contacts, a zone disablement facility and also one-man test and commissioning features.
Utilising LPCB approved conventional smoke or heat detectors, Xenex offers exceptional value for money.
₦ 255,000.00₦ 265,000.00GENT 8 ZONE REPEAT INDICATOR, LESS BATTERIES (13271-08LB)
₦ 255,000.00₦ 265,000.00 -
ZETA Zener Barrier
The Zeta zener barrier is an intrinsically safe, zone-powered, Zener-diode barrier for use in conventional fire detection systems for protection within hazardous areas.
₦ 258,500.00₦ 275,000.00ZETA Zener Barrier
₦ 258,500.00₦ 275,000.00 -
ZETA Standard Protocol Loop card for Smart6 Multi Panel
The plug-in loop card module provides power for, and handles communications to the analog addressable devices. It has 4 fault status LED’s for added fault finding
₦ 260,000.00₦ 270,000.00ZETA Standard Protocol Loop card for Smart6 Multi Panel
₦ 260,000.00₦ 270,000.00 -
C-TEC Power Supply for ZFP Fire Alarm Panel
Key Features:
-
Designed exclusively for ZFP control panels
-
High-efficiency output and advanced fault diagnostics
-
Easy installation and long-lasting performance
-
Fully compliant with fire safety standards
Power your fire safety system with confidence. Shop now and keep your property protected 24/7!
₦ 267,750.00₦ 280,500.00C-TEC Power Supply for ZFP Fire Alarm Panel
₦ 267,750.00₦ 280,500.00 -
-
₦ 270,000.00
₦ 279,000.00Solo 330 Aerosol Smoke and CO Dispenser
₦ 270,000.00₦ 279,000.00 -
Gent S4-34741 Beam Sensor Transmitter
Gent S4-34741 Beam Sensor Transmitter
The S4-34741 from Gent is a Beam Sensor Emitter.
Vigilon’s loop-powered technology allows up to 16 beam pairs to be connected to the same loop circuit, each covering a distance of up to 100m without the need for an external Power Supply Unit, wiring, or interfacing.
₦ 270,000.00₦ 300,000.00Gent S4-34741 Beam Sensor Transmitter
₦ 270,000.00₦ 300,000.00
chat with us