Popular
Category: Fire Alarm System
Showing 321–336 of 564 results
-
Gent VIG-DOOR-SS Vigilon Main Control Panel Door
₦1,900,000.00Add to cartThe Gent VIG-DOOR-SS Vigilon Main Control Panel Door is a replacement Door for the Vigilon Main Control Panel.
-
Gent VIG-FLUSH-SS Vigilon Main Control Panel Flush Mounting Kit (Stainless Steel)
₦540,000.00Add to cartGent VIG-FLUSH-SS Vigilon Main Control Panel Flush Mounting Kit (Stainless Steel)
Gent VIG-FLUSH-SS Vigilon Main Control Panel Flush Mounting Kit
-
Gent VIG-IOC-V3+ Input/Output Card for Vigilon V3+
₦1,375,000.00Add to cartGent VIG-IOC-V3+ Input/Output Card for Vigilon V3+
The VIG-IOC-V3+ is an Input/Output Card for Vigilon V3+.
-
Gent VIG-LPC-EN Vigilon Loop Card (EN54) (2Km) for VIG1-24 and VIG1-72 Fire Alarm Control Panel
₦155,000.00Add to cartDESCRIPTION
Gent VIG-LPC-EN Vigilon Loop Card (EN54)
The VIG-LPC-EN is an additional Loop Card for Gent Vigilon Panels.
The new Loop Card is designed to fully comply with EN54-23 and is available on EN54 versions of the Vigilon range of panels. The increased power allows for up to 100 EN54-23 sensor-sounder-strobes on a 2km loop, managing up to 200 devices in total.
-
Gent VIG-MCC-EN Vigilon Main Control Card EN54 Zonal Display
₦651,000.00Add to cartGent VIG-MCC-EN Vigilon Main Control Card EN54 Zonal Display
The Gent VIG-MCC-EN is a replacement main control card EN54 zonal display for use with the Gent Vigilon panel.
-
Gent VIG-MCC-UPGR Vigilon Main Control Card Vigilon EN
₦1,082,400.00Add to cartGent VIG-MCC-UPGR Vigilon Main Control Card Vigilon EN
The VIG-MCC-UPGR is a Main Control Card designed for the Vigilon EN54 panels all doors (PLCC extractor necessary).
-
GENT VIG-MCC-V3+ MCC Control Card for VIG1-2 and VIG1-72 (EN54) fire alarm control panels
₦450,000.00Add to cartGent VIG-MCC-V3+ MCC Control Card for VIG1-24 VIGILON 1- 4 LOOP PANEL & VIG1-72 VIGILON 1-6 LOOP PANEL BS / V3+
-
Gent VIG-MIM-A3 A3 Zonal and Graphic Mimic
₦1,248,000.00Add to cartThe A3 Zonal and Graphic Mimic provides a pictorial representation of a building’s layout. This gives a rapid, visual indication of the location of any fi re incident.
It can also be used to provide indication of fault and supervisory events in the system.
This one panel can be used as a Zonal Mimic or can hold a pictorial overlay to provide a customised view.
The A3 Customised Mimic panel can be mounted in either landscape or portrait, while an A3 Zonal Mimic panel must only be mounted landscape when using the overlay supplier -
Gent VIG-NC Network Card
₦146,000.00Add to cartGent VIG-NC Network Card
The VIG-NC is a Network Card for Vigilon Analogue Addressable Fire Detection Systems. It is used to expand the Gent Vigilon Plus and Gent Vigilon fire alarm network
The Vigilon panel manages up to 6 loops each accommodating up to 200 devices on each loop, including repeat panels, interfaces, call points, sensors and sounders. The Vigilon panel is available with 24 and 72 hour standby options. Advanced networking options allow multi domain networks of up to 200 panels/nodes with options of copper or fibre connections.
-
Gent VIG-NC-DOM-FO Secure Domain Bridge Card
₦350,000.00Add to cartSecure domain bridge card designed for use with the Gent VIG1-24 and VIG1-72 Vigilon Control Panels (EN54 & V3+).
-
Gent VIG-NC-FO Fibre Optic Network Card
₦650,000.00Add to cart The VIG-NC-FO is a fibre optical network card designed for the Vigilon Network. The fibre network card allows fast message passing to the network.
The card must be plugged into the backplane of the panel or node in a dedicated slot. The fibre optic cables connect directly to sockets on the card. There are two builds of the fibre network cards for secure EN54 and BS Vigilon networks.
The VIG-NC-FO is a fibre optical network card designed for the Vigilon Network. The fibre network card allows fast message passing to the network.
The card must be plugged into the backplane of the panel or node in a dedicated slot. The fibre optic cables connect directly to sockets on the card. There are two builds of the fibre network cards for secure EN54 and BS Vigilon networks.
-
Gent VIG-NC-V3+ Network Card V3+
₦206,000.00Add to cartGent VIG-NC-V3+ Network Card V3+
This network card is used to allow messages of status and control data to pass between control panels and network (or terminal) nodes in a networked fire system. The card must be plugged into the backplane of each panel and node in a dedicated slot. When it is plugged into the slot P8 on the backplane the external cables must be connected to terminal block P10, which is also located on the backplane. The dual-in-line switches on the card are set to program the address number and baud rate.
-
Gent VIG-NPORT-100 NPORT 100 – RS232 to IP Device (Single Unit – 2 Required Per Link)
Read moreGent VIG-NPORT-100 NPORT 100 – RS232 to IP Device (Single Unit – 2 Required Per Link)
The VIG-NPORT-100 is a NPORT 100 – RS232 to IP Device.
-
Gent VIG-RPT-DOOR-SS Stainless Steel Door
₦1,000,000.00Add to cartThe Gent VIG-RPT-DOOR-SS Stainless-Steel Door is a replacement door for the Vigilon Repeater Control Panel.
-
Gent VIG-RPT-FLUSH Repeat Panel Flush Surround (In Black)
₦770,000.00Add to cartThe VIG-24-FLUSH is a Vigilon Control Panel Flush Surround. Key Features Ideal to use for the Gent Vigilon Plus VIG-24 fire alarm panels and terminal node. Simple to fit
-
Gent VIG72-UPGR – Upgrade Kit VIG72-UPGR
Read moreDescription Gent VIG72-UPGR – Upgrade Kit. This upgrade kit (VIG72-UPGR) is designed for installation in a Vigilon panel (VIG1-24). It is used to convert a VIG1-24 panel to VIG1-72 panel. The kit includes: 1 x 72Hr PSU module 2 x 21 AH Batteries 1 x Battery Enclosure
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
