Welcome to Top Store

Cart

Your Cart is Empty

Back To Shop

Category: Fire Alarm System

Showing 385–400 of 564 results

  • Honeywell Gent 240V Electronic Bell 155 x 85m

    11,000.00

    Manufactured by Honeywell Gent, from the Gent 240V ac 50-60Hz 30mA IP55 Electronic Bell 155 x 85m is 6 inches and weather resistant. As well as being perfect for fire installations it can also be used in security applications. It can be mounted be mounted on the wall or the ceiling – it’s truly reliable. …

    Honeywell Gent 240V Electronic Bell 155 x 85mRead More

    Add to cart
  • Honeywell Notifier 74432-88NM Conventional Red Fire Bell 24 VDC

    • Designed with a modern feel
    • Has a loud ring output
    • There’s an option of a weatherproof kit
    • All parts clip together to assemble
    Read more
  • Horing Lih 8016 Heat Detector

    Characteristics Dual LEDs for 360-degree visibility. Optional Magnetic test feature makes maintenance easy and simple. The standard detector is 2-wire or 3-wire with base. For 4-wire type just add one relay output module on 3-wire base. Simple and easy module placement enables wider application. Detector is made of high endurance, solid and colorfast Fire-proof plastic. …

    Horing Lih 8016 Heat DetectorRead More

    Read more
  • HORING LIH AH Q01 EN Photoelectric Smoke Detector

    10,000.00
    • EN54-7 Approval.
    • The standard detector is 2-wire or 3-wire with base.
    • For 4-wire type just add one relay output module on 3-wire base. Simple and easy module placement enables wider application.
    • Dual LEDs for 360-degree visibility. Bi-color LED, Stand-by Status: Green; Alarm Status: Red.
    • Detector is made of high endurance, solid and colorfast Fire-proof plastic.
    • Non-loosening screws on base terminal for easy installation.
    • Detector has passed strict EMC test, which greatly eliminates false alarms caused by interference from nearby sources.
    Add to cart
  • HORING LIH AH Q05 EN Combination Smoke and Heat Detector

    • EN54-7 & EN54-5 Approval.
    • The standard detector is 2-wire or 3-wire with base.
    • For 4-wire type just add one relay output module on 3-wire base. Simple and easy module placement enables wider application.
    • Dual LEDs for 360-degree visibility. Bi-color LED, Stand-by Status: Green; Alarm Status: Red.
    • Detector is made of high endurance, solid and colorfast Fire-proof plastic.
    • Non-loosening screws on base terminal for easy installation.
    • Detector has passed strict EMC test, which greatly eliminates false alarms caused by interference from nearby sources.
    Read more
  • HORING LIH AH QP112 1 zone Conventional Fire Alarm Control Panel

    • Removable front board for easy maintenance.
    • Easy-to-clean front board is able to avoid dirt attached.
    • High luminance and long life span LED.
    • Independent visual & audible indication for zone open/short fault.
    • Independent visual & audible indication for AC power & battery fault.
    • Visual & audible indication for sounder short circuit fault.
    • Buzzer silence with 3-mode operation feature.
    • Accurate supervision circuit for battery.
    • Short circuit = Alarm feature ( selected by JUMPER applicable for manual call point w/o resistance).
    Read more
  • HORING LIH AH QP212 2 zone Conventional Fire Alarm Control Panel 

    • Day/Night Mode Selection.
    • Ground fault detection feature.
    • Zone Output, Fault Output and Alarm Output (NO. NC. COM).
    • System will back to normal automatically after alarm status is released.
    • Removable front board for easy maintenance.
    • Easy-to-clean front board is able to avoid dirt attached.
    • High luminance and long life span LED.
    • Independent visual & audible indication for zone open/short fault.
    • Independent visual & audible indication for AC power & battery fault.
    • Visual & audible indication for sounder short circuit fault.
    • Buzzer silence with 3-mode operation feature.
    • Accurate supervision circuit for battery.
    Read more
  • HORING LIH AH QP412 4 zone Conventional Fire Alarm Control Panel

    • Day/Night Mode Selection.
    • Ground fault detection feature.
    • 24V DC power output for external load.
    • Zone EOL resistor can be set from panel board.
    • Zone Output, Fault Output and Alarm Output (NO. NC. COM).
    • System will back to normal automatically after alarm status is released.
    • Removable front board for easy maintenance.
    • Easy-to-clean front board is able to avoid dirt attached.
    • High luminance and long life span LED.
    • Independent visual & audible indication for zone open/short fault.
    • Independent visual & audible indication for AC power & battery fault.
    • Visual & audible indication for sounder short circuit fault.
    • Buzzer silence with 3-mode operation feature.
    • Accurate supervision circuit for battery.

     

    Read more
  • HORING LIH AH QSP-120 Multi-Hazard Suppression Control Panel  

    QSP-120 Multi-Hazard Suppression Control Panel Characteristics   Panel and manual pull station count-down simultaneously. Discharge delay timer setting (20~999 seconds). Cross-zone detection confirmation makes better stability. Built-in phone jacks on both panel and manual pull station. Expandable to 5 loops (10 zones) detection sections. Each section has manual/auto operation mode. Wiring trouble inspection. Through dipswitch …

    HORING LIH AH QSP-120 Multi-Hazard Suppression Control Panel  Read More

    Read more
  • HORING LIH AH QSP-32 Manual Pull Station

    Characteristics Emergency Start/Stop switch, Auto/Manual key switch. Power LED, Releasing LED, Start LED, Stop LED, Auto LED, and Manual LED. Digital release countdown. Specifications Model QSP-32 Supply Voltage 24V DC Material 1.2mm stainless steel Color Red Dimensions 160mm(H) x 165mm(W) x 50mm(D) Catalogue QSP-32 Catalogue

    Read more
  • HORING LIH AH-0014 Flame Detector

    77,000.00

    General Description The detector has wide-angle sensitivity that can reliably and quickly detect weak ultraviolet radiations emitted by flame. It will not react to room illuminations, infrared or other light sources unrelated to real fire. Applications Premises with higher ceilings: theater, gym, storage, gallery or warehouse, etc. Places where fires happen easily: places storing with combustible goods, gas …

    HORING LIH AH-0014 Flame DetectorRead More

    Add to cart
  • HORING LIH AH-03127-S Electronic Sounder

    18,000.00

    General This electronic sounder is designed for use with fire alarm systems, security systems and industrial signaling systems. Combined sounder and beacon provides and audio-visual warning with is suitable for places where high sound output and visual indication is required. Characteristics   EN54-3 Approval Type B Sounder 32 signal tones selectable by Dip switch. High …

    HORING LIH AH-03127-S Electronic SounderRead More

    Add to cart
  • HORING LIH AH-03233 Releasing Indicator

    Characteristics The display can be set according to customer’s requirements.   Model AH-03233 Supply Voltage 24V DC 670mA (bulb) 310mA (LED) Light Source 1W bulb x 18 or ø5 LED RED x 28 Display Type Non-flash Material 0.8mm stainless steel Color Red Dimensions 155mm(H) x 405mm(W) x 60mm(D)

    Read more
  • HORING LIH AH-0621 UL Photoelectric Smoke Detector

    • UL Listed.
    • The standard detector is 2-wire or 3-wire with base.
    • For 4-wire type just add one relay output module on 3-wire base. Simple and easy module placement enables wider application.
    • Twin-color LED display enables viewer to easily identify the current status of detector.
    • Contacts material is highly acid-resistant and rust-resistant.
    • Detector is made of high endurance, solid and colorfast Fire-proof plastic.
    • Non-loosening screws on base terminal for easy installation.
    • Detector has passed strict EMC test, which greatly eliminates false alarms caused by interference from nearby sources.
    Read more
  • HORING LIH AH-0817 Resettable Manual Call Point

    7,000.00

    Feature CE & EN54-11 approval, type A outdoor. Red LED with current limiting resistor. Three different resistance selectable (240,470,680 ohm). Choice of red, yellow, blue or green finish also available for custom-made. Clear protection cover is also available (optional). Specification AH-0817 Resettable Manual Call Point Model AH-0817 Operating Contact 6A 125/250VAC Resistance 30MΩ Ambient Temperature …

    HORING LIH AH-0817 Resettable Manual Call PointRead More

    Add to cart

Cart

Your Cart is Empty

Back To Shop