Popular
Zeta ID2/8/M Infinity ID2 Intelligent 2 Wire 8 Zone Fire Panel in Metal Enclosure
DESCRIPTION
Zeta Alarm Systems is proud to introduce the most advanced 2 wire system on the market. We can now provide a system that gives all of the benefits associated with a ‘2 Wire’ installation (less cable, quicker installation, cost savings on labour/product) and has the facility to ‘I.D.’ the devices.
The system is built on the proven communication protocol developed by Zeta Alarm Systems and shares the same platform as our largest, most powerful system.
The ID2 can be used for new installations, as a retrofit for any conventional system or as a replacement for existing 2 wire systems when the extra features are deemed to be desirable/necessary. This is possible because the ID2 devices sit on radial circuits, thus making it easy to ‘upgrade’ a system with the facility to I.D. devices without the need to re-wire.
Zeta ID2/8/M Infinity ID2 Intelligent 2 Wire 8 Zone Fire Panel in Metal Enclosure
Zeta Alarm Systems is proud to introduce the most advanced 2 wire system on the market. We can now provide a system that gives all of the benefits associated with a ‘2 Wire’ installation (less cable, quicker installation, cost savings on labour/product) and has the facility to ‘I.D.’ the devices.
The system is built on the proven communication protocol developed by Zeta Alarm Systems and shares the same platform as our largest, most powerful system.
The ID2 can be used for new installations, as a retrofit for any conventional system or as a replacement for existing 2 wire systems when the extra features are deemed to be desirable/necessary. This is possible because the ID2 devices sit on radial circuits, thus making it easy to ‘upgrade’ a system with the facility to I.D. devices without the need to re-wire.
Key Features:
- The system meets the full requirements of BSEN5839 parts 1 and 6.
- The control panel has been designed to meet EN54 parts 2 and 4.
- Each device can be uniquely identified by the panel
- Device Count Verification
- Alarm Verification
- 2048 Event History
- ID2 Smartphone App available for iOS and Android
- Cable Break protection
- Cable Short Circuit Protection
- One man walk test facility
- Auto configuration for easy set up
- Safer than a traditional 2 wire/conventional system as it tells you exactly where the event is – no time wasted searching a whole zone
- Technical Specification
Model       ID2/2         ID2/4             ID2/8
Part No.      37-660        37-661             37-663
Supply Voltage 230V AC +10% /- 15%Â @ 50/60 Hz
System Voltage 29V DC Nominal (19 – 30 V)
Sounder Output
Loop Powered Sounders  2 x Conventional sounder circuits
28V nominal,150mA (20-30V DC)
Fault Output   1 x Fault Relay SELV@1A (Normaly
Energised)
Fire Output    1 x Fire Relay SELV@1A
No. of Zones     2             4               8
Zone Capacity 15 Devices per Zone
Max. No. of
Detection Circuits
Radial Mode – 8 Radial Circuits
Loop Mode  – 1 Loop Circuit
Max. Loop
Sounder Quantity 80 Sounders
Repeater
Connection RS485
Dimensions (mm) 370(W)
x 311(H)
x 113(D)
| Weight | 3.5 kg |
|---|---|
| Dimensions | 3.11 × 37.0 × 11.3 cm |
Related products
-
Gent Flush Manual Call Point (XENS-850) 470 Ohms Glass
Read moreGent XENS-850 Flush Manual Call Point 470 Ohms Glass
Gent Flush Manual Call Point are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.
Both break glass, and resettable operating elements can be used in the standard unit by a yellow strip on the element which becomes visible when activated.
With the addition of a hinged transparent cover the element may be protected against accidental operation.
A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch and thus a full functional test is achieved.
-
Gent Conventional Optical Smoke Detector : Eco 1003
₦13,500.00Add to cartPhoto-thermal model
Laser-based remote test unit
EN 54 Certified (2000 edition)
Photoelectric, photo-thermal and thermal detectors
Improved chamber design
Compatible with fire and security systems
-20 to +60ºC operating temperature range
Choice of bases (including a 12V relay version)
Photoelectric model with integral piezoelectric sounder
(availability subject to further announcement) -
Gent CWST-RW-S5 VAD Red Base – White Flash
Read moreCWST-RW-S5 features high output LEDs, advanced optics and an innovative lens design, providing outstanding Omni-directional light coverage at low current draw. Specifically designed for, and approved to meet EN54-23. The CWST-RW-S5 delivers outstanding quality, reliability and long operational life.
-
APOLLO INTELLIGENT MANUAL CALL POINT – BLUE (SA5900-905APO)
Read moreThe Manual Call Point is commonly used to manually release secure doors or barriers in the event of emergency.
- Resettable operating element
- 170° viewable LED
- Suitable for semi flush or surface mounting
- ‘Plug and Play’ terminal connections for faster wiring
- Continuity link for wiring test before commissioning
- XP95, Discovery and CoreProtocol compatible
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
Reviews
There are no reviews yet.