An optional system expansion device for use with the EP203 three zone automatic extinguisher panel.
Mounts inside the EP203 panel to provide five volt free relay contacts (reset, mode, discharged, hold and abort).
Reset relay switches during the panel’s reset cycle.
Mode relay switches when the extinguishant system’s mode is changed to manual.
Discharged relay switches when a released flow switch input (e.g. from the extinguishant pipework) is received to indicate the extinguishant has been released.
Hold relay switches when a hold input is received at the panel. If the panel is in 2nd stage alarm (i.e. it is in automatic mode and detection circuits are activated, or it is in either automatic/manual mode and a manual release input is operated) the extinguishant release sequence is halted.
Abort relay switches when an abort input is received at the panel to cancel the extinguishant release sequence.
Quick view Add to wishlist
DESCRIPTION
A high-quality Type B high fixed temperature (75ºC) heat detector offering outstanding detection performance at a very competitive price.
Manufactured by C-TEC in the UK.
Third-party certified to EN54-5 by Intertek.
Wide 6-33V DC operating voltage.
Two 8mm x 2mm ultra-bright red LED indicating strips offering 360º visibility.
Compatible with our ActiV C4408D diode, C4408 non-diode and C4408R relay bases.
₦ 28,000.00₦ 30,000.00
Quick view Add to wishlist
Designed to connect to the EP203 Automatic Extinguisher Panel to provide remote system status indication via three LEDs.
Includes a mode (auto/manual) keyswitch.
Mounts on a standard UK single gang 25mm flush or surface back box.
Max. 8 economy status units per EP203 panel.
₦ 156,000.00₦ 159,000.00
Quick view Add to wishlist
An attractive IP66 rated enclosure designed for use with a SigTEL EVC302GF or EVC302F flush mounting disabled refuge controller.
Includes a handle and mounting plate.
Measures 200 W x 302 H x 123mm deep.
Textured RAL 7035 (light grey) finish.
Also compatible with C-TEC’s EP210F remote status units.
Quick view Add to wishlist
Certified to EN54 Parts 11 (LPCB) and 13 (BSI).
Smooth-action resettable element mimics the feel of breaking glass.
Supplied with a red back box, reset key and ‘Not in Use’ label.
Red LED ‘alarm ring’ illuminates call point face upon activation.
Photoluminescent operating window remains visible for up to 5 minutes.
Note an additional BF370SFP red flush mounting plate is required if you wish to flush mount the BF370S.
IP66 weatherproof version (order code BF370S/W) also available.
₦ 5,500.00
Quick view Add to wishlist
Certified to EN54 Parts 11 (LPCB) and 13 (BSI).
‘Universal’ design combines multiple functions into one product, simplifying selection and reducing stock variants.
Supplied with a glass AND plastic element, a 470Ω AND 680Ω resistor and a red surface mounting back box which can be optionally discarded if flush mounting.
Quick visible alarm indication.
Changeover contacts.
IP24 rated.
Quick view Add to wishlist
Certified to EN54 Part 11 (LPCB/VdS).
Unique ‘Plug & Play’ installation concept.
Supplied with a non-breaking plastic resettable element.
Includes a 470Ω resistor, test key and red back box.
Anti-Tamper facility.
Flush version (without a red back box) also available (order code BF370MFR).
Quick view Add to wishlist
Protective cover for flush mounted manual call points.
Helps prevent malicious activation by emitting a piercing 96dB alarm tone when its hinged cover is lifted.
Comprises a clear, tamper proof cover and frame that retrofits over all known break glass call points.
Ideal for schools, colleges, hospitals and other areas where there is a threat of false activation.
Kit includes one Euro Stopper frame, two coloured housing shells (red & green), one break seal and two label sheets in 13 languages.
Surface and non-sounder variants also available (see variants tab below).
Main picture shows Euro Stopper with a Manual Call Point. The call point is NOT supplied.
Quick view Add to wishlist
IP56 rated protective cover for flush mounted manual call points.
Suitable for indoor and outdoor use.
Helps prevent malicious activation by emitting a piercing 96dB alarm tone when its hinged cover is lifted.
Comprises a clear, tamper proof cover and frame that retrofits over all known break glass call points.
Ideal for schools, colleges, hospitals and other areas where there is a threat of false activation.
Kit includes one Universal Stopper frame, a red header labelled ‘IN CASE OF FIRE – LIFT BREAK GLASS’ and one break seal.
Surface and non-sounder variants also available (see variants tab below).
Main picture shows Universal Stopper with a Manual Call Point. The call point is NOT supplied.
Download datasheet
Quick view Add to wishlist
Certified to EN54 Part 11 (LPCB/VdS).
Unique ‘Plug & Play’ installation concept.
Supplied with a non-breaking plastic resettable element.
Includes a 470Ω resistor, test key and red back box.
Anti-Tamper facility.
Flush version (without a red back box) also available (order code BF370MFR).
Quick view Add to wishlist
Certified to EN54 Part 11 (LPCB/VdS).
Weather resistant and sealed to IP67.
Ideal for use in external environments where water and dirt are likely to be present.
Unique ‘Plug & Play’ installation concept.
Supplied with a glass element.
Includes a 470Ω resistor and test key.
Anti-Tamper facility.
Wide -25ºC to +70ºC operating range.
Quick view Add to wishlist
Protective cover for flush mounted manual call points.
Helps prevent accidental or malicious call point activation.
Comprises a clear, tamper proof call point cover c/w red header labelled ‘IN CASE OF FIRE LIFT COVER – BREAK GLASS’.
Surface version (ST-6931) and green versions also available (see variants tab below).
Main picture shows Call Point Stopper with a Manual Call Point. The call point is NOT supplied.
Download datasheet
Quick view Add to wishlist
1
chat with us