- You cannot add that amount of "C-TEC CFP AlarmSense 4 Zone Two-Wire Fire Alarm Panel" to the cart because there is not enough stock (0 remaining).
-
C-TEC ZFP Network
✅ Key Advantages & Functions of the C-TEC ZFP Network Panel:
-
Fully Scalable Network System: Supports up to 64 networked panels across large buildings or multi-site premises.
-
High-Resolution Touchscreen Interface: Simple, intuitive operation even in high-pressure scenarios.
-
Powerful Cause & Effect Programming: Custom responses for alarms, warnings, and events.
-
Advanced Diagnostics: Easily troubleshoot faults or check device status across the network.
-
Multi-language Support: Ideal for diverse installations.
-
Customizable Zone Labelling: Clear identification for faster emergency response.
-
EN54-2 & EN54-4 Compliant: Fully certified for safety and reliability.
₦ 189,000.00₦ 190,000.00C-TEC ZFP Network
₦ 189,000.00₦ 190,000.00 -
-
CTEC ZPF Network Card- fire alarm networking solution
🔹 Smart Network Technology
🔹 Scalable Architecture for Large Sites
🔹 Compatible with Addressable Systems
🔹 Reliable Performance in Critical EnvironmentsIdeal for hospitals, schools, commercial buildings, and industrial environments, the CTEC ZPF Network ensures real-time alerts, fault tolerance, and easy system expansion.
₦ 189,000.00₦ 198,000.00CTEC ZPF Network Card- fire alarm networking solution
₦ 189,000.00₦ 198,000.00 -
C-TEC CFP AlarmSense 2 Zone Two-Wire Fire Alarm Panel
-
Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB).
-
Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
-
Manufactured by C-TEC in the UK.
-
Two AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points, sounders and visual indicators.
-
Four conventional sounder circuits.
-
Integral 1.5A EN54-4/A2 compliant switch mode PSU.
-
Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
-
Two on-board relays (Fire and Fault).
-
Two open-collector outputs (Remote and Reset).
-
‘Class change’ and alert inputs.
-
Installer-friendly design.
-
Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
-
Low 25mA quiescent current.
-
Multiple indicators.
-
System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system).
-
Space for two x 12V 3.3Ah VRLA batteries.
₦ 195,000.00₦ 200,000.00C-TEC CFP AlarmSense 2 Zone Two-Wire Fire Alarm Panel
₦ 195,000.00₦ 200,000.00 -
-
CTEC 2 Zone Plastic Fire Alarm Control Panel
✅ Cost-effective and user-friendly
✅ Supports conventional fire alarm systems
✅ LED indicators for easy monitoring
✅ Fully compliant with BS EN54 standards
✅ Compact and lightweight design for easy installationWhether you’re upgrading an existing system or installing a new one, the CTEC 2 Zone Fire Alarm Panel delivers unmatched performance and peace of mind.
₦ 200,550.00₦ 210,100.00CTEC 2 Zone Plastic Fire Alarm Control Panel
₦ 200,550.00₦ 210,100.00 -
C-TEC CFP AlarmSense 4 Zone Two-Wire Fire Alarm Panel
-
Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB).
-
Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
-
Manufactured by C-TEC in the UK.
-
Two AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points, sounders and visual indicators.
-
Four conventional sounder circuits.
-
Integral 1.5A EN54-4/A2 compliant switch mode PSU.
-
Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
-
Two on-board relays (Fire and Fault).
-
Two open-collector outputs (Remote and Reset).
-
‘Class change’ and alert inputs.
-
Installer-friendly design.
-
Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
-
Low 25mA quiescent current.
-
Multiple indicators.
-
System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system).
-
Space for two x 12V 3.3Ah VRLA batteries.
₦ 222,000.00₦ 250,000.00C-TEC CFP AlarmSense 4 Zone Two-Wire Fire Alarm Panel
₦ 222,000.00₦ 250,000.00 -
-
CTEC 4 Zone Plastic Fire Alarm Panel
✅ EN54 compliant
✅ Sturdy plastic housing
✅ LED indicators for clear zone status
✅ Ideal for offices, schools, shops, and residential complexes🔥 Keep your property protected and stay compliant with industry standards.
📦 Now available for fast delivery.₦ 231,000.00₦ 242,000.00CTEC 4 Zone Plastic Fire Alarm Panel
₦ 231,000.00₦ 242,000.00 -
C-TEC Power Supply for ZFP Panel
🔋 Key Functions & Advantages:
-
✅ Seamless Integration: Specifically built to work with ZFP fire alarm systems.
-
✅ Battery Backup Support: Automatically switches to backup batteries in case of mains failure.
-
✅ Efficient Power Regulation: Provides stable and safe voltage to prevent damage or signal dropouts.
-
✅ LED Indicators: Clear status lights for easy monitoring and diagnostics.
-
✅ Overload & Short-Circuit Protection: Built-in safety to protect your entire system.
-
✅ Compliant with EN54 Standards: Trusted and certified for use in professional fire alarm installations.
Whether you’re upgrading or installing a new ZFP panel, the C-TEC Power Supply is the smart choice for dependable performance.
🛒 Available now
₦ 248,850.00₦ 250,000.00C-TEC Power Supply for ZFP Panel
₦ 248,850.00₦ 250,000.00 -
-
C-TEC Power Supply for ZFP Fire Alarm Panel
Key Features:
-
Designed exclusively for ZFP control panels
-
High-efficiency output and advanced fault diagnostics
-
Easy installation and long-lasting performance
-
Fully compliant with fire safety standards
Power your fire safety system with confidence. Shop now and keep your property protected 24/7!
₦ 257,250.00₦ 269,500.00C-TEC Power Supply for ZFP Fire Alarm Panel
₦ 257,250.00₦ 269,500.00 -
-
🔌 CTEC 3+1 Power Supply – Reliable Power for Your Fire Alarm System! 🔥
✅ Key Functions & Features:
-
Supports 3 fire alarm zones + 1 auxiliary circuit
-
Provides stable, regulated power to fire control systems
-
Built-in battery backup charging support
-
LED indicators for status monitoring and diagnostics
-
Designed for CTEC fire alarm panels
-
Easy installation with durable components for long-lasting use
₦ 259,875.00₦ 269,875.00🔌 CTEC 3+1 Power Supply – Reliable Power for Your Fire Alarm System! 🔥
₦ 259,875.00₦ 269,875.00 -
-
C-TEC 3+1 Motherboard – fire alarm panels
✅ Features & Benefits:
-
Supports 3 Fire Zones + 1 Auxiliary Zone
-
Designed for C-TEC Fire Alarm Control Panels
-
Easy to Install & Configure
-
Built for Long-Lasting Performance
-
Ensures Optimal System Communication and Safety
Whether you’re upgrading your system or performing a repair, the C-TEC 3+1 motherboard delivers dependable operation where it matters most.
🛒 Shop Now – Fast Shipping | Certified Quality | Trusted by Professionals
₦ 262,500.00₦ 275,000.00C-TEC 3+1 Motherboard – fire alarm panels
₦ 262,500.00₦ 275,000.00 -
-
C-TEC CFP AlarmSense 8 Zone Two-Wire Fire Alarm Panel
-
Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB).
-
Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
-
Manufactured by C-TEC in the UK.
-
Eight AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points, sounders and visual indicators.
-
Four conventional sounder circuits.
-
Integral 1.5A EN54-4/A2 compliant switch mode PSU.
-
Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
-
Two on-board relays (Fire and Fault).
-
Two open-collector outputs (Remote and Reset).
-
‘Class change’ and alert inputs.
-
Installer-friendly design.
-
Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
-
Low 25mA quiescent current.
-
Multiple indicators.
-
System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system).
-
Space for two x 12V 3.3Ah VRLA batteries.
₦ 295,000.00₦ 300,000.00C-TEC CFP AlarmSense 8 Zone Two-Wire Fire Alarm Panel
₦ 295,000.00₦ 300,000.00 -
-
C-TEC CFP 8 Zone Repeater Panel Part No. CFP760
-
-
Can be used to repeat the functions of a master CFP standard or AlarmSense 2-8 zone fire panel at remote parts of site (e.g. all potential fire service entrances).
-
Up to 8 repeaters per CFP master.
-
Includes its own Mains power supply that requires its own standby battery supply.
-
Provides the user with access to all AL1 and AL2 functions.
-
Master/Repeater communication achieved using CFP761 network driver cards (one CFP761 is supplied with the Repeater, an additional CF761 card is required at the master CFP).
-
Communicates over screened two-wire fire resistant cable.
-
Total repeater network cable length should not exceed 1KM.
-
Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
-
₦ 295,000.00₦ 300,000.00C-TEC CFP 8 Zone Repeater Panel Part No. CFP760
₦ 295,000.00₦ 300,000.00 -
chat with us