-
C-TEC Retrofit Decor Plate Part No. BF-DP
- An easy-to-fit 152mm diameter mounting accessory for use with ceiling mounted ActiV or CAST devices.
- Helps cover the decorating witness marks left by Grade D type Mains/Battery Alarms on system retrofits.
- Includes multiple mounting holes and a large cable entry section.
- Two K40x12 Pozi Flange PT retaining screws are supplied to secure the C-TEC ActiV or CAST device directly to the BF-DP.
-
C-TEC Power Supply Configurator Part No. BF423
- Allows C-TEC’s BF560 and BF562 range of boxed, caged and PCB-only EN54-4/A2 Power Supplies to be optionally customised to suit an application.
- Configurable PSU parameters include Float voltage temperature compensation; Battery charge rate (mA); Battery impedance; Input/Output settings.
- Intuitive and easy-to-use with comprehensive Help files.
- Requires a PC running Windows XP, Vista, 7 or 8.
- Includes a Configurator, software CD, mini-USB to standard-USB connection lead and a 1.3mm to 1.3mm connection lead c/w adaptor.
- IMPORTANT: Changing a PSU’s parameters will render its EN54-4/A2 approval obsolete and any changes must be tested by the responsible person for correct operation.
- Free software updates available via our Software Page
-
C-TEC STU Mounting Plate for BF360/12 or BF560/12 12V 2A PSU Part No. BF360SP
- Facilitates the mounting of a third-party Subscriber Terminal Unit (STU) in a BF360-12 or BF560/12 12V 2A PSU.
- Finished in 1.2mm steel.
- Accessory pack includes installation instructions, mounting screws, fixing pads, cable clip and cable tie.
- Can also be used with a BF360-24 or BF560-24 1.5A 24V PSU by using an ancillary BF360BOX enclosure mounted alongside the PSU.
-
C-TEC Single Gang Surface Interface Plate, shallow (20mm) Part No. NCP-23
-
-
-
- Allows standard UK single gang plated products to be fixed to most European style back boxes (square and round variants).
- Adapts to most European fixing centres – see video for further details.
- Multiple variants available – options include single gang shallow (NCP23), single gang deep (NCP24), double gang shallow (NCP25) and double gang deep (NCP26).
- Designed to match C-TEC’s existing plastics and colours.
- Tough and durable.
- Can also be surface mounted directly to a wall.
-
-
-
-
C-TEC Single Gang Surface Interface Plate, deep (25mm) Part No. NCP-24
- Allows standard UK single gang plated products to be fixed to most European style back boxes (square and round variants).
- Adapts to most European fixing centres – see video for further details.
- Multiple variants available – options include single gang shallow (NCP23), single gang deep (NCP24), double gang shallow (NCP25) and double gang deep (NCP26).
- Designed to match C-TEC’s existing plastics and colours.
- Tough and durable.
- Can also be surface mounted directly to a wall.
-
C-TEC Red Plastic Fire Panel Key
- A spare plastic S-KEY for use C-TEC’s CFP, XFP and ZFP fire panels.
- Provides authorised users with access to a fire panel’s authorised user controls.
- Finished in red polycarbonate for extra strength.
- See tech. specs below for full panel compatibility details
-
C-TEC CFP AlarmSense 8 Zone Two-Wire Fire Alarm Panel
-
Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB).
-
Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
-
Manufactured by C-TEC in the UK.
-
Eight AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points, sounders and visual indicators.
-
Four conventional sounder circuits.
-
Integral 1.5A EN54-4/A2 compliant switch mode PSU.
-
Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
-
Two on-board relays (Fire and Fault).
-
Two open-collector outputs (Remote and Reset).
-
‘Class change’ and alert inputs.
-
Installer-friendly design.
-
Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
-
Low 25mA quiescent current.
-
Multiple indicators.
-
System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system).
-
Space for two x 12V 3.3Ah VRLA batteries.
₦ 295,000.00₦ 300,000.00C-TEC CFP AlarmSense 8 Zone Two-Wire Fire Alarm Panel
₦ 295,000.00₦ 300,000.00 -
-
C-TEC CFP AlarmSense 4 Zone Two-Wire Fire Alarm Panel
-
Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB).
-
Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
-
Manufactured by C-TEC in the UK.
-
Two AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points, sounders and visual indicators.
-
Four conventional sounder circuits.
-
Integral 1.5A EN54-4/A2 compliant switch mode PSU.
-
Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
-
Two on-board relays (Fire and Fault).
-
Two open-collector outputs (Remote and Reset).
-
‘Class change’ and alert inputs.
-
Installer-friendly design.
-
Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
-
Low 25mA quiescent current.
-
Multiple indicators.
-
System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system).
-
Space for two x 12V 3.3Ah VRLA batteries.
₦ 222,000.00₦ 250,000.00C-TEC CFP AlarmSense 4 Zone Two-Wire Fire Alarm Panel
₦ 222,000.00₦ 250,000.00 -
-
C-TEC CFP AlarmSense 2 Zone Two-Wire Fire Alarm Panel
-
Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB).
-
Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
-
Manufactured by C-TEC in the UK.
-
Two AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points, sounders and visual indicators.
-
Four conventional sounder circuits.
-
Integral 1.5A EN54-4/A2 compliant switch mode PSU.
-
Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
-
Two on-board relays (Fire and Fault).
-
Two open-collector outputs (Remote and Reset).
-
‘Class change’ and alert inputs.
-
Installer-friendly design.
-
Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
-
Low 25mA quiescent current.
-
Multiple indicators.
-
System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system).
-
Space for two x 12V 3.3Ah VRLA batteries.
₦ 195,000.00₦ 200,000.00C-TEC CFP AlarmSense 2 Zone Two-Wire Fire Alarm Panel
₦ 195,000.00₦ 200,000.00 -
-
Gent VIG-LPC-EN Vigilon Loop Card (EN54) (2Km) for VIG1-24 and VIG1-72 Fire Alarm Control Panel
DESCRIPTION
Gent VIG-LPC-EN Vigilon Loop Card (EN54)
The VIG-LPC-EN is an additional Loop Card for Gent Vigilon Panels.
The new Loop Card is designed to fully comply with EN54-23 and is available on EN54 versions of the Vigilon range of panels. The increased power allows for up to 100 EN54-23 sensor-sounder-strobes on a 2km loop, managing up to 200 devices in total.
₦ 155,000.00
- Personal Protection
- Garrett
- Paxton
- Proximity Reader
- Proximity
- Proximity Card
- Proximity Reader
- PAXTON PROXIMITY 10 CARD PACK – GREEN, AMBER OR RED
- PAXTON CARDLOCK READER – SATIN CHROME
- PAXTON SWITCH 2 CONTROLLER
- PAXTON NET2 ENTRY MONITOR
- PAXTON ENTRY STANDARD PANEL – SURFACE MOUNT
- PAXTON NET2 ENTRY PREMIUM MONITOR – SURFACE MOUNT
- PAXTON NET2 ENTRY TOUCH PANEL SURFACE MOUNT
- PAXTON READER CABLE – HALOGEN FREE 10 CORE 100m
- PAXTON 12V 2A DC POWER SUPPLY PLASTIC CABINET
- PAXTON NET2 DESKSTOP READER, USB
- PAXTON NET 2 SOFTWARE PROFESSIONAL
- PAXTON NET2 PROXIMITY ISO CARDS – Without magstripe, per one
- PAXTON NET2 AIR BRIDGE
- PAXTON NET2 PLUS 1DOOR CONTROLLER – 12V 2A PSU, PLASTIC CABINET 682-531
- Paxton Net2 Plus 1 door controller (682-493 -EX)
- PAXTON Entry VR Panel – flush mount (337-500EX)
- PAXTON NET2 PLUS 1 DOOR CONTROLLER – POE+, PLASTIC CABINET 682-284
- PAXTON NET2 P50 PROXIMITY READERS(353-110 EX)
- Zeta
- Soca
- Solo
- SOLO100-001- Fibreglass 4 Section Telescopic Pole – 4.5 metres
- Solo 100 Telescopic Access Pole
- Solo 111 Urban 0.5m Extension Pole
- Solo 110 Urban Telescopic Pole 1.75 Metres
- SOLO Testifier Smoke/Heat Detector TESTIFIRE1001-001
- Solo 330 Aerosol Smoke and CO Dispenser
- Solo 365 Electronic Smoke Detector Tester KITS
- Solo 200 – Universal Detector Removal Tool
- Solo 461-00 Cordless Heat Detector Heat Only
- Solo A5 Smoke Detector Tester Aerosol 250ml (Flammable)
- Gent
- C-Tec
- Ei Electronics
chat with us