Control panels connect detectors, alarms, suppression systems, and monitoring stations to communicate fire detection and response signals.
Control panel activate visual, audio, and occasionally other forms of notification equipment to alert residents of an emergency situation.
There are two kinds of fire panels available today: Addressable fire alarm panel vs. conventional fire alarm panel. A conventional fire alarm control panel employs one or more circuits, connected to initiating devices wired in parallel. Addressable panels are more advanced than traditional panels, with greater information capacity and control flexibility.
Voice evacuation panels are another type of fire alarm control panel. Designed to provide outputs for speakers in the system.
A fire suppression system will be installed on important and valuable structures. The panel notifies a monitoring center of the alarm status, and people at the receiving location decide what to do next. The panel controls HVAC systems, building automation controls, access points, and elevators to isolate the fire or route workers.
- You cannot add that amount of "C-TEC CFP AlarmSense 2 Zone Two-Wire Fire Alarm Panel" to the cart because there is not enough stock (0 remaining).
-
C-TEC XFP Network Card
✅ Simple plug-in design
✅ Reliable and secure RS485 networking
✅ Real-time status sharing between panels
✅ Cost-effective for scalable installationsStay compliant. Stay connected. Stay protected.
Choose the C-TEC XFP Network Card — Because Every Second Counts.₦ 113,925.00₦ 115,925.00C-TEC XFP Network Card
₦ 113,925.00₦ 115,925.00 -
CTEC 4 Zone Motherboard – Fire Alarm Control
✅ Key Features:
-
Supports 4 independent fire alarm zones
-
Easy integration with CTEC fire panels
-
High-quality, durable components
-
LED indicators for fault and fire status
-
Cost-effective and compliant with EN54 standards
Perfect for schools, offices, shops, warehouses, and residential complexes!
₦ 113,925.00₦ 115,925.00CTEC 4 Zone Motherboard – Fire Alarm Control
₦ 113,925.00₦ 115,925.00 -
-
CTEC 8-Zone Motherboard – Fire Alarm Control
✅ Easy installation
✅ Compatible with CTEC fire alarm panels
✅ Reliable zone monitoring & fault detection
✅ Built to meet international safety standards₦ 119,700.00₦ 123,700.00CTEC 8-Zone Motherboard – Fire Alarm Control
₦ 119,700.00₦ 123,700.00 -
₦ 120,000.00
₦ 125,000.00C-Tec FP 8 Zone Conventional Fire Alarm Panel-Ff388-2
₦ 120,000.00₦ 125,000.00 -
🛡️ Orisong/Concept Plus 4-Zone Fire Alarm Control Panel
✔️ Easy to install and operate
✔️ Robust performance with high sensitivity
✔️ LED indicators for real-time zone status
✔️ Trusted for offices, schools, stores, and residential buildingsProtect what matters. Choose performance you can trust.
₦ 130,200.00₦ 132,200.00🛡️ Orisong/Concept Plus 4-Zone Fire Alarm Control Panel
₦ 130,200.00₦ 132,200.00 -
🛡️ Orisong/Concept Plus 6-Zone Fire Alarm Control Panel
✔️ Independent 6-zone control
✔️ Clear status indication & quick fault detection
✔️ Easy integration with existing alarm systems
✔️ Durable build, user-friendly interfaceUpgrade your fire safety system today with smart, scalable protection.
₦ 135,450.00₦ 137,450.00🛡️ Orisong/Concept Plus 6-Zone Fire Alarm Control Panel
₦ 135,450.00₦ 137,450.00 -
Wireless Control Panel in a Metal Body
✅ Heavy-Duty Metal Enclosure for superior durability
✅ Wireless Connectivity for easy, clutter-free installation
✅ Tamper-Resistant Design for added security
✅ Ideal for alarm systems, access control, and automation setupsWhether you’re installing a new system or upgrading an existing one, this wireless panel ensures maximum protection with minimal maintenance.
₦ 152,250.00₦ 153,250.00Wireless Control Panel in a Metal Body
₦ 152,250.00₦ 153,250.00 -
CTEC ZPF Network – fire alarm networking solution
🔹 Smart Network Technology
🔹 Scalable Architecture for Large Sites
🔹 Compatible with Addressable Systems
🔹 Reliable Performance in Critical EnvironmentsIdeal for hospitals, schools, commercial buildings, and industrial environments, the CTEC ZPF Network ensures real-time alerts, fault tolerance, and easy system expansion.
₦ 194,775.00₦ 199,775.00CTEC ZPF Network – fire alarm networking solution
₦ 194,775.00₦ 199,775.00 -
C-TEC CFP AlarmSense 2 Zone Two-Wire Fire Alarm Panel
-
Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB).
-
Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
-
Manufactured by C-TEC in the UK.
-
Two AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points, sounders and visual indicators.
-
Four conventional sounder circuits.
-
Integral 1.5A EN54-4/A2 compliant switch mode PSU.
-
Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
-
Two on-board relays (Fire and Fault).
-
Two open-collector outputs (Remote and Reset).
-
‘Class change’ and alert inputs.
-
Installer-friendly design.
-
Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
-
Low 25mA quiescent current.
-
Multiple indicators.
-
System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system).
-
Space for two x 12V 3.3Ah VRLA batteries.
₦ 195,000.00₦ 200,000.00C-TEC CFP AlarmSense 2 Zone Two-Wire Fire Alarm Panel
₦ 195,000.00₦ 200,000.00 -
-
C-TEC CFP AlarmSense 4 Zone Two-Wire Fire Alarm Panel
-
Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB).
-
Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
-
Manufactured by C-TEC in the UK.
-
Two AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points, sounders and visual indicators.
-
Four conventional sounder circuits.
-
Integral 1.5A EN54-4/A2 compliant switch mode PSU.
-
Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
-
Two on-board relays (Fire and Fault).
-
Two open-collector outputs (Remote and Reset).
-
‘Class change’ and alert inputs.
-
Installer-friendly design.
-
Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
-
Low 25mA quiescent current.
-
Multiple indicators.
-
System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system).
-
Space for two x 12V 3.3Ah VRLA batteries.
₦ 222,000.00₦ 250,000.00C-TEC CFP AlarmSense 4 Zone Two-Wire Fire Alarm Panel
₦ 222,000.00₦ 250,000.00 -
-
Zeta 2 Zone Fire Alarm Control Panel Motherboard
Key Features:
-
🔧 Two Independent Detection Zones – Efficiently manages and processes signals from detectors and call points.
-
⚡ Quick Response Time – Built for fast and accurate fire detection and alarm triggering.
-
🧠 Smart Diagnostic Indicators – LED indicators for power, fault, and zone status ensure easy system monitoring.
-
🔌 Easy Integration – Compatible with a wide range of Zeta detectors and alarm accessories.
-
🛡️ High Reliability – Engineered with industry-grade components to guarantee consistent performance in critical situations.
₦ 231,000.00₦ 242,000.00Zeta 2 Zone Fire Alarm Control Panel Motherboard
₦ 231,000.00₦ 242,000.00 -
-
Zeta 8-Zone Fire Alarm Control Panel Motherboard
✅ Supports up to 8 detection zones
✅ Clear LED indicators for status monitoring
✅ Compatible with a wide range of conventional devices
✅ Built for durability and long-term performanceIdeal for: Offices, Schools, Residential Buildings, Warehouses, Commercial Spaces
₦ 252,000.00₦ 264,000.00Zeta 8-Zone Fire Alarm Control Panel Motherboard
₦ 252,000.00₦ 264,000.00
chat with us