Control panels connect detectors, alarms, suppression systems, and monitoring stations to communicate fire detection and response signals.
Control panel activate visual, audio, and occasionally other forms of notification equipment to alert residents of an emergency situation.
There are two kinds of fire panels available today: Addressable fire alarm panel vs. conventional fire alarm panel. A conventional fire alarm control panel employs one or more circuits, connected to initiating devices wired in parallel. Addressable panels are more advanced than traditional panels, with greater information capacity and control flexibility.
Voice evacuation panels are another type of fire alarm control panel. Designed to provide outputs for speakers in the system.
A fire suppression system will be installed on important and valuable structures. The panel notifies a monitoring center of the alarm status, and people at the receiving location decide what to do next. The panel controls HVAC systems, building automation controls, access points, and elevators to isolate the fire or route workers.
-
C-TEC CFP AlarmSense 2 Zone Two-Wire Fire Alarm Panel
-
Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB).
-
Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
-
Manufactured by C-TEC in the UK.
-
Two AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points, sounders and visual indicators.
-
Four conventional sounder circuits.
-
Integral 1.5A EN54-4/A2 compliant switch mode PSU.
-
Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
-
Two on-board relays (Fire and Fault).
-
Two open-collector outputs (Remote and Reset).
-
‘Class change’ and alert inputs.
-
Installer-friendly design.
-
Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
-
Low 25mA quiescent current.
-
Multiple indicators.
-
System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system).
-
Space for two x 12V 3.3Ah VRLA batteries.
₦ 195,000.00₦ 200,000.00Buy nowC-TEC CFP AlarmSense 2 Zone Two-Wire Fire Alarm Panel
₦ 195,000.00₦ 200,000.00 -
-
-
C-TEC CFP AlarmSense 4 Zone Two-Wire Fire Alarm Panel
-
Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB).
-
Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
-
Manufactured by C-TEC in the UK.
-
Two AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points, sounders and visual indicators.
-
Four conventional sounder circuits.
-
Integral 1.5A EN54-4/A2 compliant switch mode PSU.
-
Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
-
Two on-board relays (Fire and Fault).
-
Two open-collector outputs (Remote and Reset).
-
‘Class change’ and alert inputs.
-
Installer-friendly design.
-
Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
-
Low 25mA quiescent current.
-
Multiple indicators.
-
System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system).
-
Space for two x 12V 3.3Ah VRLA batteries.
₦ 222,000.00₦ 250,000.00Buy nowC-TEC CFP AlarmSense 4 Zone Two-Wire Fire Alarm Panel
₦ 222,000.00₦ 250,000.00 -
-
Zeta 2 Zone Fire Alarm Control Panel Motherboard
Key Features:
-
🔧 Two Independent Detection Zones – Efficiently manages and processes signals from detectors and call points.
-
⚡ Quick Response Time – Built for fast and accurate fire detection and alarm triggering.
-
🧠 Smart Diagnostic Indicators – LED indicators for power, fault, and zone status ensure easy system monitoring.
-
🔌 Easy Integration – Compatible with a wide range of Zeta detectors and alarm accessories.
-
🛡️ High Reliability – Engineered with industry-grade components to guarantee consistent performance in critical situations.
₦ 231,000.00₦ 235,000.00Buy nowZeta 2 Zone Fire Alarm Control Panel Motherboard
₦ 231,000.00₦ 235,000.00 -
-
Zeta 8-Zone Fire Alarm Control Panel Motherboard
✅ Supports up to 8 detection zones
✅ Clear LED indicators for status monitoring
✅ Compatible with a wide range of conventional devices
✅ Built for durability and long-term performanceIdeal for: Offices, Schools, Residential Buildings, Warehouses, Commercial Spaces
₦ 252,000.00₦ 255,000.00Buy nowZeta 8-Zone Fire Alarm Control Panel Motherboard
₦ 252,000.00₦ 255,000.00 -
GENT 8 ZONE REPEAT INDICATOR, LESS BATTERIES (13271-08LB)
Gent 13271-08LB 8 Zone Xenex Conventional Fire Alarm Repeat Panel EN54 (Less Batteries)
BSI approved to EN54: Parts 2 & 4, the Xenex control panel can be used on installations meeting BS 5839:Part1. Control panel options for 2-8 zones can be specified.
Designed to simplify system installation, each Xenex panel contains an integral power supply and battery support to drive up to 8 alarm sounder circuits, 2 auxiliary relay contacts, a zone disablement facility and also one-man test and commissioning features.
Utilising LPCB approved conventional smoke or heat detectors, Xenex offers exceptional value for money.
₦ 255,000.00₦ 265,000.00Buy nowGENT 8 ZONE REPEAT INDICATOR, LESS BATTERIES (13271-08LB)
₦ 255,000.00₦ 265,000.00 -
Gent Compact-LPC-EN Loop Card
✅ Key Advantages:
-
🔁 Enhanced Device Communication: Supports bi-directional communication for faster, more reliable response across all loop devices.
-
📡 Extended Loop Capacity: Handles more detectors, call points, and sounders per loop—ideal for large installations.
-
🔒 High Data Integrity: Built with fail-safe protocols to minimize false alarms and maximize system integrity.
-
⚙️ Easy Integration: Compatible with Gent fire panels and devices for smooth system expansion or upgrades.
-
🛠️ Simplified Installation & Maintenance: Designed with engineers in mind—plug-and-play configuration speeds up deployment.
🔐 Trust Gent for advanced fire safety. Install the Compact-LPC-EN Loop Card and give your system the power it needs to protect what matters most.
₦ 295,000.00₦ 300,000.00Buy nowGent Compact-LPC-EN Loop Card
₦ 295,000.00₦ 300,000.00 -
-
C-TEC CFP AlarmSense 8 Zone Two-Wire Fire Alarm Panel
-
Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB).
-
Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
-
Manufactured by C-TEC in the UK.
-
Eight AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points, sounders and visual indicators.
-
Four conventional sounder circuits.
-
Integral 1.5A EN54-4/A2 compliant switch mode PSU.
-
Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
-
Two on-board relays (Fire and Fault).
-
Two open-collector outputs (Remote and Reset).
-
‘Class change’ and alert inputs.
-
Installer-friendly design.
-
Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
-
Low 25mA quiescent current.
-
Multiple indicators.
-
System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system).
-
Space for two x 12V 3.3Ah VRLA batteries.
₦ 295,000.00₦ 300,000.00Buy nowC-TEC CFP AlarmSense 8 Zone Two-Wire Fire Alarm Panel
₦ 295,000.00₦ 300,000.00 -
-
C-TEC CFP 8 Zone Repeater Panel Part No. CFP760
-
-
Can be used to repeat the functions of a master CFP standard or AlarmSense 2-8 zone fire panel at remote parts of site (e.g. all potential fire service entrances).
-
Up to 8 repeaters per CFP master.
-
Includes its own Mains power supply that requires its own standby battery supply.
-
Provides the user with access to all AL1 and AL2 functions.
-
Master/Repeater communication achieved using CFP761 network driver cards (one CFP761 is supplied with the Repeater, an additional CF761 card is required at the master CFP).
-
Communicates over screened two-wire fire resistant cable.
-
Total repeater network cable length should not exceed 1KM.
-
Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
-
₦ 295,000.00₦ 300,000.00Buy nowC-TEC CFP 8 Zone Repeater Panel Part No. CFP760
₦ 295,000.00₦ 300,000.00 -
-
Zeta Infinity 8 Conventional 1 Zone Fire Alarm Panel IN1
✅ Key Advantages:
-
🔒 Single-Zone Monitoring: Ideal for focused protection in compact facilities, offices, shops, or residential complexes.
-
⚡ Quick Response System: Delivers real-time fire alerts for faster evacuation and emergency action.
-
🔧 User-Friendly Interface: Easy to install, operate, and maintain — no tech stress!
-
🔌 Compatibility: Works seamlessly with most conventional fire detectors and call points.
-
🛡️ Built to Last: Robust, durable design backed by Zeta’s trusted quality.
-
🧯 Cost-Effective Safety: High-performance fire protection at an affordable price.
🔗 Secure your building today with reliable fire detection.
🛒 Available now at Trends Ventures Limited.₦ 308,700.00₦ 309,700.00Buy nowZeta Infinity 8 Conventional 1 Zone Fire Alarm Panel IN1
₦ 308,700.00₦ 309,700.00 -
-
Gent 4CH Interface S4-3440-02 Panel
Key Features:
-
🔹 4 Independent Channels: Supports multiple inputs or outputs for diverse device integration.
-
🔹 Fully Addressable: Compatible with Gent’s Vigilon loop, ensuring intelligent communication.
-
🔹 Flexible Configuration: Easily programmable for various monitoring and control applications.
-
🔹 Compact & Durable Design: Built to meet demanding safety standards for commercial and industrial environments.
-
🔹 Status Indicators: Clear LED indicators for real-time channel status updates.
₦ 315,000.00₦ 320,000.00Buy nowGent 4CH Interface S4-3440-02 Panel
₦ 315,000.00₦ 320,000.00 -
-
Gent Vigilon Loop Card
Key Features:
-
Supports connection of up to 200 devices per loop (panel-dependent)
-
Enables seamless integration of Gent intelligent devices
-
Ensures reliable two-way communication between devices and the control panel
-
Ideal for commercial, industrial, and large-scale installations
-
Easy installation and configuration with Gent Vigilon panels
Ensure smarter protection and system flexibility with the Gent Vigilon Loop Card — the backbone of an intelligent fire detection system.
₦ 315,000.00₦ 320,000.00Buy nowGent Vigilon Loop Card
₦ 315,000.00₦ 320,000.00 -
