Control panels connect detectors, alarms, suppression systems, and monitoring stations to communicate fire detection and response signals.
Control panel activate visual, audio, and occasionally other forms of notification equipment to alert residents of an emergency situation.
There are two kinds of fire panels available today: Addressable fire alarm panel vs. conventional fire alarm panel. A conventional fire alarm control panel employs one or more circuits, connected to initiating devices wired in parallel. Addressable panels are more advanced than traditional panels, with greater information capacity and control flexibility.
Voice evacuation panels are another type of fire alarm control panel. Designed to provide outputs for speakers in the system.
A fire suppression system will be installed on important and valuable structures. The panel notifies a monitoring center of the alarm status, and people at the receiving location decide what to do next. The panel controls HVAC systems, building automation controls, access points, and elevators to isolate the fire or route workers.
- You cannot add that amount of "Gent 2 Zone Panel" to the cart because there is not enough stock (0 remaining).
-
Zeta 6 Zone Fire Alarm Control Panel
✅ Key Features:
-
Monitors 6 independent fire zones
-
LED indicators for easy zone status visibility
-
Compatible with conventional smoke, heat, and manual call point detectors
-
Built-in sounder circuits for immediate alarm alerts
-
Easy installation and intuitive user interface
-
Fault monitoring and test mode functionality
-
Complies with international fire safety standards
Whether it’s for schools, offices, retail spaces, or residential buildings, the Zeta 6 Zone Panel offers efficient and centralized fire alarm management—giving you peace of mind when it matters most.
₦ 454,650.00₦ 476,300.00Zeta 6 Zone Fire Alarm Control Panel
₦ 454,650.00₦ 476,300.00 -
-
Zeta Infinity 8 Conventional 6 Zone-Fire-Alarm-Panel IN6
🔒 Key Advantages:
-
🔥 Supports up to 6 independent fire detection zones – ideal for sectional monitoring
-
🛠️ Easy installation & user-friendly interface – reduces setup and training time
-
🚨 Clear LED indicators – instant visual status updates
-
🧠 Advanced fault diagnostics – quickly identify and resolve issues
-
🔁 Compatible with a wide range of conventional detectors & devices
-
🔌 Battery backup support – ensures continued operation during power failures
-
🏢 Ideal for schools, offices, hotels, factories, and retail spaces
Secure peace of mind with the Zeta Infinity 8.
🛒 Now available at Trends Ventures Limited₦ 456,750.00₦ 460,000.00Zeta Infinity 8 Conventional 6 Zone-Fire-Alarm-Panel IN6
₦ 456,750.00₦ 460,000.00 -
-
Zeta 8 Zone Fire Alarm Control Panel
✅ Key Features:
-
Supports up to 8 fire zones for flexible deployment
-
User-friendly interface with LED zone indicators
-
Integrated sounder and alarm outputs
-
Compatible with conventional fire detection devices
-
Programmable settings for tailored performance
-
Stylish and compact design suitable for any building interior
Perfect for offices, schools, hotels, commercial spaces, and residential blocks, the Zeta 8 Zone Panel provides dependable fire monitoring and centralized control, giving you peace of mind with every second that counts.
₦ 471,450.00₦ 493,900.00Zeta 8 Zone Fire Alarm Control Panel
₦ 471,450.00₦ 493,900.00 -
-
Zeta Extinguishing Panel (Fire Suppression Control)
✅ Key Features:
-
Intelligent 3-zone fire detection and control
-
Fully compliant with international fire safety standards
-
Built-in timers for alarm, delay, and discharge sequences
-
Compatible with various extinguishing agents (CO₂, FM-200, Novec 1230, etc.)
-
Manual release and abort options
-
Real-time status alerts and event logging
Whether for commercial, industrial, or mission-critical environments, the Zeta Extinguishing Panel delivers unmatched performance and peace of mind.
₦ 472,500.00₦ 495,000.00Zeta Extinguishing Panel (Fire Suppression Control)
₦ 472,500.00₦ 495,000.00 -
-
C-TEC EP203 Automatic Extinguisher Panel Part No. EP203
-
Technical Specifications
-
Approvals/certifications Certified to EN12094-1 and EN54-2 & 4 by the LPCB.
-
Mains supply 230V 50/60Hz.
-
Mains rated current 810mA max.
-
Internal power supply 19V-28.5V (27V nominal). Ripple 7V maximum (battery fault).
-
Total output current limited to 1.5A @ 230Vac continuous, 3A peak (ImaxA eq 800mA).
-
Quiescent current 40mA (on mains fail). Zone quiescent 2mA max.
-
Max battery size and type 2 x 12V 7Ah VRLA connected in series.
-
No. of detector zone circuits 3 @ 19-28Vdc (Max. length per circuit is 250m).
-
Max. devices per detector zone 20 detectors (or 32 detectors/manual call points combined).
-
No. of conventional sounder circuits 3 (two x 1st stage; one x 2nd stage). Max. length per circuit is 50m).
-
EOL resistor value 6800 5% Tol. 0/25W (blue, grey, red, gold).
-
Max. sounder output current 3 x 200mA.
-
Auxiliary relays Six: (1) Fire; (2) Local Fire; (3) Extract Fan; (4) 1st Stage; (5) 2nd Stage; (6) Fault. Volt free single pole
changeover. Max. switch current 1A; Max. switch voltage 30Vdc. Five additional relays available via
EP212 relay card.
Other outputs Extinguishant release (21-28Vdc, rated at 1A for 5 mins). Programmable to delay by 0-60 seconds; to
be active for 1-300 seconds and to flood for 60-1800 seconds.
Auxiliary inputs Six: (1) Manual Release; (2) Flow Switch; (3) Low Pressure; (4) Mode; (5) Hold; (6) Abort. 8K-2K normal;
1.8K-200 active; 150-0 short circuit. EOL value: 6K8 +/-5%, 0.25W.
Indicators Multiple indicators are provided – refer to the EP203 instructions for details.
Controls Extinguishant release (housed in yellow casing); Accessed keyswitch; Operation keyswitch (Manual
only or Manual & Auto); Buttons for Menu; Silence internal sounder; reset panel; silence/resound
sounders and scrolling.
Expansion connections Yes – for up to 8 x Remote status units (2 wire RS485 + 2 wire power) and/or up to 8 x Ecomomy
status units (2 wire power + 2 wire mode select).
Product dimensions (mm) 439 W x 276 H x 70 D mm (back box); 467 W x 293 H x 29 D mm (lid).
Construction & finish Metal back box; metal chassis’ plastic lid.
IP Rating IP30.
Weight 4.2kg (without batteries).
Operating conditions/temperature -5°C to +40°C. Max relative humidity: 95%
₦ 570,000.00₦ 600,000.00C-TEC EP203 Automatic Extinguisher Panel Part No. EP203
₦ 570,000.00₦ 600,000.00 -
-
Gent Xenex 2 Zone Conventional Fire Alarm Panel
FEATURES
-
-
Gent Xenex 13270-02LB
-
2 sounder circuits
-
1A sounder circuit max load
-
Conforms to EN54: parts 2 & 4
-
On-board relay
-
Fire and fault relay expansion card optional
-
Easy configuration
-
Class change input
-
₦ 624,750.00₦ 630,000.00Gent Xenex 2 Zone Conventional Fire Alarm Panel
₦ 624,750.00₦ 630,000.00 -
-
Gent 2 Zone Panel
Why Choose Gent Panels?
-
Proven Honeywell technology
-
Scalable for any building size
-
Long-term reliability and low maintenance
-
Seamless integration with voice alarms, smoke vents, and emergency lighting
From conventional setups to smart addressable systems – Gent has you covered.
👉 Ready to upgrade your fire safety? Visit safetechhub.com or contact us for professional advice and supply.₦ 624,750.00₦ 630,750.00Gent 2 Zone Panel
₦ 624,750.00₦ 630,750.00 -
-
Zeta Quatro Repeater Panel – fire alarm system upgrade
🔹 Key Features:
-
Full compatibility with Zeta addressable fire alarm panels
-
High-visibility LCD display for instant status updates
-
Easy setup with minimal wiring
-
Scalable for large installations
-
Certified and compliant with international fire safety standards
₦ 630,000.00₦ 660,000.00Zeta Quatro Repeater Panel – fire alarm system upgrade
₦ 630,000.00₦ 660,000.00 -
-
Gent 4 ZONE CONVENTIONAL PANEL
DESCRIPTION
Gent 13270-04LB 4 Zone Conventional Xenex Fire Panel
BSI approved to EN54: Parts 2 & 4, the Xenex control panel can be used on installations meeting BS 5839:Part1. Control panel options for 2-8 zones can be specified.
Designed to simplify system installation, each Xenex panel contains an integral power supply and battery support to drive up to 8 alarm sounder circuits, 2 auxiliary relay contacts, a zone disablement facility and also one-man test and commissioning features.
₦ 708,750.00₦ 720,000.00Gent 4 ZONE CONVENTIONAL PANEL
₦ 708,750.00₦ 720,000.00 -
Gent 4 Zone Fire Alarm Panel
Key Features:
-
Supports up to 4 detection zones
-
LED indicators for clear zone status
-
Built-in sounder circuit
-
Battery backup compatibility
-
Designed for reliability, compliance, and ease of use
₦ 798,000.00₦ 836,000.00Gent 4 Zone Fire Alarm Panel
₦ 798,000.00₦ 836,000.00 -
-
Gent Xenex 13270-08LB 8 Zone Conventional Fire Alarm Panel
The Gent Xenex 13270-08LB fire alarm panel is a highly cost-effective conventional option for building premises requiring coverage to four zones.
With eight alarm sounder circuits, repeater panel output, remote evacuation control and one-man test and commissioning, Xenex by Gent is a leader in conventional panel technology.
₦ 846,825.00₦ 850,000.00Gent Xenex 13270-08LB 8 Zone Conventional Fire Alarm Panel
₦ 846,825.00₦ 850,000.00 -
CTEC 2 Loop Repeater Panel – Fire Alarm System Expansion
Key Benefits:
✅ Real-Time Fire Alarm Status – Instantly mirrors events from the main panel, helping improve response time and coordination.
✅ Enhanced Coverage – Ideal for use in large buildings, multi-storey complexes, hospitals, schools, and commercial facilities.
✅ User-Friendly Interface – Clear display and intuitive controls make it easy for staff to monitor system status with minimal training.
✅ Easy Installation & Integration – Simple wiring and compatibility with 2-loop systems reduce setup time and maintenance hassle.
✅ Durable & Reliable – Built with robust components for long-lasting performance even in demanding environments.₦ 855,750.00₦ 890,750.00CTEC 2 Loop Repeater Panel – Fire Alarm System Expansion
₦ 855,750.00₦ 890,750.00
chat with us