In the event of a fire or an emergency, inhabitants can use manual callpoint interface to raise the alarm, begin a building evacuation, release gas, or open a controlled door.
Manual Call Point manually transmits the fire alarm signal to control panel through the bus line. Provides contact closure to activate emergency equipment, audible and visual signals. Generally installed in staircases, hallways, evacuation passages, or places where people haunt.
A wireless base connects the wireless system to the wireless transceiver.
- Dual-band transmission
- Technology with channel change
- Regular functional check
- Alarm and fault forwarding in accordance with EN54-2
- Battery life up to 5 years
-
Reset Call Point Waterproof Reset Call Point
DESCRIPTION
The ZT-CP3 and ZT-CP3/WP call points are
unique in that they mimic the feel of breaking
glass whilst offering the user the benefits and
environmental advantages of a re-settable
operating element.
The CP3 uses a simple yet ingenius patented mechanism
which consists of a rigid plastic operating element and
an over centre spring mechanism. This arrangement
provides real action on operation and simulates break
glass activation.₦ 21,000.00₦ 23,000.00Buy nowReset Call Point Waterproof Reset Call Point
₦ 21,000.00₦ 23,000.00 -
₦ 10,000.00
₦ 12,000.00Buy nowGent Surface MCP (XENS-805) 470 Ohms Re-settable
₦ 10,000.00₦ 12,000.00 -
Zeta CP4 Conventional Manual Call Point, Red ZT-CP4
DESCRIPTION
Zeta Conventional Manual Call Point
The ZT-CP4 is a resettable manual call point
with unique and innovative features. It has
been designed to obtain maximum visibility, high
reliability in operation and pleasant aesthetical
appearance.
When the resettable element is pressed the
spring mechanism mimics the feel of a break
glass and the resettable element goes back.
A completely new action system gives high
performance and guarantees the alarm detection
in every condition.
A reflective polyester flag appears in the bottom of
the operating face, providing the highest levels of
visibility for the user. At the heart of the call point a
spring free mechanism is used to operate the flag
and the switch via a patented design. This allows
long life and trouble free operation.₦ 8,000.00Buy now -
Gent Change Over Contact MCP
Gent Change Over Contact is a conventional manual call point, designed to provide a manual
alarm interface to conventional fire alarm control panels. All call points
are supplied in the standard red color and are available in semi-flush
mounting or surface mounting options. The manual call points are all with
a 470 Ohm resistor and Normally Open contact, complete with glass.
Both break glass, and resettable operating elements can be used in the
standard unit by a yellow strip on the element which becomes visible when
activated. -
Gent Key Operated, Surface Mounted C/W BackBox (XENS-807)
Our conventional manual call points are designed to provide a manual
alarm interface to conventional fi re alarm control panels. All call points
are supplied in the standard red colour and are available in semi-fl ush
mounting or surface mounting options. The manual call points are all with
a 470 Ohm resistor and Normally Open contact, complete with glass.
Both break glass, and resettable operating elements can be used in the
standard unit by a yellow strip on the element which becomes visible when
activated. -
Gent XENS-829 Weatherproof Manual Call Point 470 Ohms Resistor Glass
Gent XENS-829 Weatherproof Manual Call Point 470 Ohms Resistor Glass
Gent’s range of conventional manual call points are designed to provide a manual alarm interface to conventional fi re alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.
-
Gent Flush Manual Call Point (XENS-850) 470 Ohms Glass
Gent XENS-850 Flush Manual Call Point 470 Ohms Glass
Gent Flush Manual Call Point are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.
Both break glass, and resettable operating elements can be used in the standard unit by a yellow strip on the element which becomes visible when activated.
With the addition of a hinged transparent cover the element may be protected against accidental operation.
A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch and thus a full functional test is achieved.
-
C-TEC STI Euro Call Point Stopper, Flush Mount Multi Kit with Sounder Part No. STI-15020ML
-
- Protective cover for flush mounted manual call points.
- Helps prevent malicious activation by emitting a piercing 96dB alarm tone when its hinged cover is lifted.
- Comprises a clear, tamper proof cover and frame that retrofits over all known break glass call points.
- Ideal for schools, colleges, hospitals and other areas where there is a threat of false activation.
- Kit includes one Euro Stopper frame, two coloured housing shells (red & green), one break seal and two label sheets in 13 languages.
- Surface and non-sounder variants also available (see variants tab below).
- Main picture shows Euro Stopper with a Manual Call Point. The call point is NOT supplied.
-
