Conventional Fire Alarm System employs one or more initiating circuits linked to sensors wired in parallel. The number of such circuits used limits the information density. Best utilized for smaller applications, a conventional fire alarm remains a viable fire protection solution.
Conventional fire alarm system use zones. Multiple devices, both initiating and notification devices, make up a zone that connects to the main control panel. Conventional systems are analog in that they use electrical currents to communicate with the control panel.
Conventional system relies on individual circuits to communicate with the control panel. The panel’s ability to receive information limited by the number of devices it can support.
-
Gent 14115-KEY Spare Bulgin Key – Pack of 10
Gent 14115-KEY Spare Bulgin Key – Pack of 10
A spare Bulgin Key for 14115-08 key operated (pack of 10).
For use with Bulgin Key Switches (SM0319, SM0320, SM0324) and Gent key operated call points.
Bulgin keyswitches were used on the following older Gent Fire Alarm Panels for enable/disable functions:
- Fire Alarm Model 3225
- Fire Alarm Model 3226
- Fire Alarm Model 3228
- Fire Alarm Model 3280
-
Gent CWST-RW-W5 VAD Red Base – White Flash & IP65 Base
Gent CWST-RW-W5 VAD Red Base – White Flash & IP65 Base
CWST-RW-W5 features high output LEDs, advanced optics and an innovative lens design, providing outstanding Omni-directional light coverage at low current draw. Specifically designed for, and approved to meet EN54-23. The CWST-RW-W5 delivers outstanding quality, reliability and long operational life. Weatherproof base provides IP65 for external use applications.
-
Zeta Fyreye MKII Diode Base
DESCRIPTION
Fyreye MKII Diode Base
Low profile or deep diode mounting base for the Fyreye MKII range of conventional detectors.
₦ 1,500.00Buy nowZeta Fyreye MKII Diode Base
₦ 1,500.00 -
Zeta Fyreye Common Base (FE-CB)
DESCRIPTION
Fyreye Common Base
There are 6 Fyerey detector bases available for the conventional range of detectors, namely common base, diode base and relay base.
The Common base is used on systems that don’t need to keep line integrity on head removal, and also on addressable systems.
₦ 1,500.00Buy nowZeta Fyreye Common Base (FE-CB)
₦ 1,500.00 -
System Sensor Standard Detector Base (ECO1000B)
System Sensor ECO1000B Base is designed for use with System Sensor’s ECO1000 range of conventional detectors.
₦ 2,500.00₦ 3,500.00Buy nowSystem Sensor Standard Detector Base (ECO1000B)
₦ 2,500.00₦ 3,500.00 -
₦ 3,000.00
₦ 4,000.00Buy nowGent Standard Detector Base Without Diode (805590)
₦ 3,000.00₦ 4,000.00 -
-
C-TEC Manual ‘No Break’ Call Point, surface Part No. BF370S
-
- Certified to EN54 Parts 11 (LPCB)Â and 13 (BSI).
- Smooth-action resettable element mimics the feel of breaking glass.
- Supplied with a red back box, reset key and ‘Not in Use’ label.
- Red LED ‘alarm ring’ illuminates call point face upon activation.
- Photoluminescent operating window remains visible for up to 5 minutes.
- Note an additional BF370SFP red flush mounting plate is required if you wish to flush mount the BF370S.
- IP66 weatherproof version (order code BF370S/W) also available.
₦ 5,500.00Buy now -
-
-
Zeta CP4 Conventional Manual Call Point, Red ZT-CP4
DESCRIPTION
Zeta Conventional Manual Call Point
The ZT-CP4 is a resettable manual call point
with unique and innovative features. It has
been designed to obtain maximum visibility, high
reliability in operation and pleasant aesthetical
appearance.
When the resettable element is pressed the
spring mechanism mimics the feel of a break
glass and the resettable element goes back.
A completely new action system gives high
performance and guarantees the alarm detection
in every condition.
A reflective polyester flag appears in the bottom of
the operating face, providing the highest levels of
visibility for the user. At the heart of the call point a
spring free mechanism is used to operate the flag
and the switch via a patented design. This allows
long life and trouble free operation.₦ 8,000.00Buy now
