Conventional Fire Alarm System employs one or more initiating circuits linked to sensors wired in parallel. The number of such circuits used limits the information density. Best utilized for smaller applications, a conventional fire alarm remains a viable fire protection solution.

Conventional fire alarm system use zones. Multiple devices, both initiating and notification devices, make up a zone that connects to the main control panel. Conventional systems are analog in that they use electrical currents to communicate with the control panel.

Conventional system relies on individual circuits to communicate with the control panel. The panel’s ability to receive information limited by the number of devices it can support.

  • Read more

    C-TEC Single Gang Surface Interface Plate, shallow (20mm) Part No. NCP-23

    Read more

    C-TEC Single Gang Surface Interface Plate, shallow (20mm) Part No. NCP-23

  • Read more

    C-TEC Single Gang Surface Interface Plate, deep (25mm) Part No. NCP-24

    • Allows standard UK single gang plated products to be fixed to most European style back boxes (square and round variants).
    • Adapts to most European fixing centres – see video for further details.
    • Multiple variants available – options include single gang shallow (NCP23), single gang deep (NCP24), double gang shallow (NCP25) and double gang deep (NCP26).
    • Designed to match C-TEC’s existing plastics and colours.
    • Tough and durable.
    • Can also be surface mounted directly to a wall.
    Read more

    C-TEC Single Gang Surface Interface Plate, deep (25mm) Part No. NCP-24

  • -8%
    Add to cart

    AlarmSense Standard Rate of Rise Heat Detector

    When every second counts, trust the technology that responds fast and reliably. The AlarmSense Standard Rate of Rise Heat Detector is designed to detect rapid temperature increases, providing early warning of fire without false alarms triggered by daily heat variations.

    Perfect for residential, commercial, and industrial applications, this intelligent device works seamlessly with AlarmSense two-wire systems—offering an efficient and cost-effective fire safety solution.

    ✅ Rapid Heat Detection
    ✅ Highly Accurate and Reliable
    ✅ Easy Installation with Two-Wire Technology
    ✅ Ideal for Kitchens, Warehouses, and Utility Spaces

    At Trends Ventures Limited, your safety is our priority. Equip your buildings with advanced fire detection technology today and ensure peace of mind for tomorrow.

    ₦ 22,000.00₦ 24,000.00
    Add to cart

    AlarmSense Standard Rate of Rise Heat Detector

    ₦ 22,000.00₦ 24,000.00
  • -8%
    Add to cart

    AlarmSense Optical Smoke Detector

    AlarmSense Optical Smoke Detector – Reliable Fire Safety by Trends Ventures Limited

    Stay protected with the AlarmSense Optical Smoke Detector, built for fast, accurate smoke detection. Perfect for homes, offices, and commercial buildings, it integrates easily into AlarmSense two-wire systems for efficient installation.

    Key Features:

    • Fast response to slow-burning fires

    • Reduced false alarms

    • Compatible with AlarmSense control panels

    • Easy installation & low maintenance

    • LED status indicator for clear alerts

    Now available at Trends Ventures Limited – your trusted fire and safety partner.

    ₦ 23,000.00₦ 25,000.00
    Add to cart

    AlarmSense Optical Smoke Detector

    ₦ 23,000.00₦ 25,000.00
  • -2%
    Add to cart

    C-TEC CFP AlarmSense 8 Zone Two-Wire Fire Alarm Panel

    • Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB).

    • Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.

    • Manufactured by C-TEC in the UK.

    • Eight AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points, sounders and visual indicators.

    • Four conventional sounder circuits.

    • Integral 1.5A EN54-4/A2 compliant switch mode PSU.

    • Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.

    • Two on-board relays (Fire and Fault).

    • Two open-collector outputs (Remote and Reset).

    • ‘Class change’ and alert inputs.

    • Installer-friendly design.

    • Attractive flush or surface mountable plastic lid and enclosure – no bezel required.

    • Low 25mA quiescent current.

    • Multiple indicators.

    • System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system).

    • Space for two x 12V 3.3Ah VRLA batteries.

    ₦ 295,000.00₦ 300,000.00
    Add to cart

    C-TEC CFP AlarmSense 8 Zone Two-Wire Fire Alarm Panel

    ₦ 295,000.00₦ 300,000.00
  • -11%
    Add to cart

    C-TEC CFP AlarmSense 4 Zone Two-Wire Fire Alarm Panel

    • Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB).

    • Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.

    • Manufactured by C-TEC in the UK.

    • Two AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points, sounders and visual indicators.

    • Four conventional sounder circuits.

    • Integral 1.5A EN54-4/A2 compliant switch mode PSU.

    • Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.

    • Two on-board relays (Fire and Fault).

    • Two open-collector outputs (Remote and Reset).

    • ‘Class change’ and alert inputs.

    • Installer-friendly design.

    • Attractive flush or surface mountable plastic lid and enclosure – no bezel required.

    • Low 25mA quiescent current.

    • Multiple indicators.

    • System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system).

    • Space for two x 12V 3.3Ah VRLA batteries.

    ₦ 222,000.00₦ 250,000.00
    Add to cart

    C-TEC CFP AlarmSense 4 Zone Two-Wire Fire Alarm Panel

    ₦ 222,000.00₦ 250,000.00
  • -3%
    Add to cart

    C-TEC CFP AlarmSense 2 Zone Two-Wire Fire Alarm Panel

    • Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB).

    • Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.

    • Manufactured by C-TEC in the UK.

    • Two AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points, sounders and visual indicators.

    • Four conventional sounder circuits.

    • Integral 1.5A EN54-4/A2 compliant switch mode PSU.

    • Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.

    • Two on-board relays (Fire and Fault).

    • Two open-collector outputs (Remote and Reset).

    • ‘Class change’ and alert inputs.

    • Installer-friendly design.

    • Attractive flush or surface mountable plastic lid and enclosure – no bezel required.

    • Low 25mA quiescent current.

    • Multiple indicators.

    • System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system).

    • Space for two x 12V 3.3Ah VRLA batteries.

    ₦ 195,000.00₦ 200,000.00
    Add to cart

    C-TEC CFP AlarmSense 2 Zone Two-Wire Fire Alarm Panel

    ₦ 195,000.00₦ 200,000.00
  • -2%
    Add to cart

    ZETA ZXT/R Xtratone Conventional Wall Sounder (Red)

    • Complies with EN54 Part 3 Type A
    • 102dB @ 1m sound output
    • 22 Tone patterns (site selectable)
    • Flush or surface fixing
    • Housed in UL V0 flame retardant ABS
    • 4 x 20mm cable entries (2 top, 2 bottom)
    • First fix, wire to back box technology
    ₦ 60,000.00₦ 61,000.00
    Add to cart

    ZETA ZXT/R Xtratone Conventional Wall Sounder (Red)

    ₦ 60,000.00₦ 61,000.00
  • -3%
    Add to cart

    ZETA ZP-CP4/B | CP4 Conventional Surface Mount Manual Call Point, Blue

    Technical Specification
    • Current Rating: 3 Amps 12 – 24V DC
    • Low Current Rating: 1-100 mA
    • Housing and Mounting Box Material: Polycarbonate
    • Electrical Contact Material: Silver plated brass
    • Operating Temperature: -20 degrees C to +65 degrees C
    • Installation Terminal Conductor: Size 0.5mm – 2.5mm
    • Colour: Red
    • Mounting: Surfacce (with supplied back box) or Flush (optional flush mount bezel CP3-FMB required)
    • IP Rating: IP32
    ₦ 63,000.00₦ 65,000.00
    Add to cart

    ZETA ZP-CP4/B | CP4 Conventional Surface Mount Manual Call Point, Blue

    ₦ 63,000.00₦ 65,000.00
  • Read more

    ZETA ZIS-40 | Base for Intrinsically Safe Smoke Detector

    Technical Specification

    • Diameter of installation cable wires (ZIS-40; ZIS-40/W): 1mm max; n/a
    • Spacing between installation holes (ZIS-40; ZIS-40/W): 63mm; 127mm
    • Dimensions (ZIS-40; ZIS-40/W): Ø107 x 28.5mm; Ø112 x 26mm
    • Combined height: 43mm
    • Weight: 0.1kg
    Read more

    ZETA ZIS-40 | Base for Intrinsically Safe Smoke Detector

  • -4%
    Add to cart

    ZETA EX-PRO | Premier EX Pro Extinguishing Panel

    Why Choose the ZETA EX-PRO?

    ✅ Advanced Detection & Suppression – Supports up to 3 detection zones with automatic or manual extinguishing activation.
    ✅ User-Friendly Interface – Intuitive LCD display and straightforward controls for ease of operation and monitoring.
    ✅ Flexible Configuration – Compatible with a wide range of extinguishing agents, from FM200 to CO₂ and more.
    ✅ Built-In Event Log – Keep track of system events with an internal memory log for better diagnostics and compliance.
    ✅ Reliable Performance – Built to meet the latest international fire safety standards (EN12094-1).
    ✅ Fail-Safe Security – Multiple levels of fault monitoring and system status indicators for full control and peace of mind.
    ✅ Customizable Delays & Alerts – Pre-discharge warnings and programmable timers to suit your environment’s unique needs.

    Whether you’re securing data centers, industrial spaces, or high-risk facilities, the ZETA EX-PRO delivers unmatched safety, smart technology, and unwavering reliability.

    🛡️ Premier Protection Starts Here.

    ₦ 450,000.00₦ 470,000.00
    Add to cart

    ZETA EX-PRO | Premier EX Pro Extinguishing Panel

    ₦ 450,000.00₦ 470,000.00
  • -2%
    Add to cart

    Honeywell Gent 240V Electronic Bell 155 x 85m

    ✅ Key Advantages:

    • High Audibility: Produces a loud, clear ring that’s impossible to ignore.

    • Durable Design: Built to withstand demanding environments with consistent performance.

    • Quick Activation: Instant sound response for fire alarms and emergency notifications.

    • Low Maintenance: Reliable electronic mechanism requires minimal upkeep.

    • Trusted Brand: Manufactured by Honeywell Gent, a global leader in life safety technology.

    ₦ 15,750.00₦ 16,000.00
    Add to cart

    Honeywell Gent 240V Electronic Bell 155 x 85m

    ₦ 15,750.00₦ 16,000.00
chat with us
1
Select your currency
NGN Nigerian naira

Main Menu