A fire alarm system notifies us of an emergency, to take action to protect ourselves, our employees, and the general public.
Fire detection systems identify fire early when there is still enough time for inhabitants to safely evacuate. Control actions begin while the fire is still minor, early detection helps to reduce property loss and operational disruption. Fire alarm systems transmit information about the location of the fire to emergency responders, speeding up the firefighting procedure.
Sounders go off to warn those within the building that there may be a fire. The fire alarm system could include a remote signal system. It would then notify the fire department via a central station.
-
ZT-20EX Zeta ATEX Approved UV/IR Flame Detector
-
- Triple IR Spectrum – for longer distance detection and high false alarm immunity
- Compact and lightweight design
- User Selectable (Senitivity/Functions)
- Multiple output options
- Relays for Alarm and Fault
- 0-20mA (stepped)
- RS-485/RS-232 spectrum monitoring
- Lower power requirement (35mA – standby / 75mA – alarm)
- Ex cable gland /2 metre cable assembled & provided for users’ easy installation
- Certifications
- ATEX approved by DNV for explosion-proof
- CE marking
- Certifications
-
-
C-TEC Red Plastic Fire Panel Key
- A spare plastic S-KEY for use C-TEC’s CFP, XFP and ZFP fire panels.
- Provides authorised users with access to a fire panel’s authorised user controls.
- Finished in red polycarbonate for extra strength.
- See tech. specs below for full panel compatibility details
-
C-TEC Single Gang Surface Interface Plate, deep (25mm) Part No. NCP-24
- Allows standard UK single gang plated products to be fixed to most European style back boxes (square and round variants).
- Adapts to most European fixing centres – see video for further details.
- Multiple variants available – options include single gang shallow (NCP23), single gang deep (NCP24), double gang shallow (NCP25) and double gang deep (NCP26).
- Designed to match C-TEC’s existing plastics and colours.
- Tough and durable.
- Can also be surface mounted directly to a wall.
-
C-TEC Single Gang Surface Interface Plate, shallow (20mm) Part No. NCP-23
-
-
-
- Allows standard UK single gang plated products to be fixed to most European style back boxes (square and round variants).
- Adapts to most European fixing centres – see video for further details.
- Multiple variants available – options include single gang shallow (NCP23), single gang deep (NCP24), double gang shallow (NCP25) and double gang deep (NCP26).
- Designed to match C-TEC’s existing plastics and colours.
- Tough and durable.
- Can also be surface mounted directly to a wall.
-
-
-
-
C-TEC STU Mounting Plate for BF360/12 or BF560/12 12V 2A PSU Part No. BF360SP
- Facilitates the mounting of a third-party Subscriber Terminal Unit (STU) in a BF360-12 or BF560/12 12V 2A PSU.
- Finished in 1.2mm steel.
- Accessory pack includes installation instructions, mounting screws, fixing pads, cable clip and cable tie.
- Can also be used with a BF360-24 or BF560-24 1.5A 24V PSU by using an ancillary BF360BOXÂ enclosure mounted alongside the PSU.
-
C-TEC Power Supply Configurator Part No. BF423
- Allows C-TEC’s BF560 and BF562 range of boxed, caged and PCB-only EN54-4/A2 Power Supplies to be optionally customised to suit an application.
- Configurable PSU parameters include Float voltage temperature compensation; Battery charge rate (mA); Battery impedance; Input/Output settings.
- Intuitive and easy-to-use with comprehensive Help files.
- Requires a PC running Windows XP, Vista, 7 or 8.
- Includes a Configurator, software CD, mini-USB to standard-USB connection lead and a 1.3mm to 1.3mm connection lead c/w adaptor.
- IMPORTANT: Changing a PSU’s parameters will render its EN54-4/A2 approval obsolete and any changes must be tested by the responsible person for correct operation.
- Free software updates available via our Software Page
-
C-TEC Retrofit Decor Plate Part No. BF-DP
- An easy-to-fit 152mm diameter mounting accessory for use with ceiling mounted ActiV or CAST devices.
- Helps cover the decorating witness marks left by Grade D type Mains/Battery Alarms on system retrofits.
- Includes multiple mounting holes and a large cable entry section.
- Two K40x12 Pozi Flange PT retaining screws are supplied to secure the C-TEC ActiV or CAST device directly to the BF-DP.
-
C-TEC Yellow Extinguishant Release Call Point, Surface Part No. BF372
-
-
-
-
- Certified to EN54 Part 11 (LPCB/VdS).
- Ideal for use with C-TEC’s EP203 Automatic Extinguisher Panel.
- Supplied with a transparent hinged cover to prevent accidental operation.
- Includes a frangible glass element, test key and yellow back box (back box can be discarded for optional flush mounting).
- ‘Plug & Play’ installation concept.
- Labelled ‘Extinguishant Release’.
-
-
-
-
-
C-TEC STI Call Point Stopper, Flush Mount Part No. STI-6930
- Protective cover for flush mounted manual call points.
- Helps prevent accidental or malicious call point activation.
- Comprises a clear, tamper proof call point cover c/w red header labelled ‘IN CASE OF FIRE LIFT COVER – BREAK GLASS’.
- Surface version (ST-6931) and green versions also available (see variants tab below).
- Main picture shows Call Point Stopper with a Manual Call Point. The call point is NOT supplied.
-
C-TEC Manual IP67 ‘Crack Glass’ Call Point, surface Part No. BF370/W
- Certified to EN54 Part 11 (LPCB/VdS).
- Weather resistant and sealed to IP67.
- Ideal for use in external environments where water and dirt are likely to be present.
- Unique ‘Plug & Play’ installation concept.
- Supplied with a glass element.
- Includes a 470Ω resistor and test key.
- Anti-Tamper facility.
- Wide -25ºC to +70ºC operating range.
-
C-TEC Manual ‘No Break’ Call Point, surface Part No. BF370MR
- Certified to EN54 Part 11 (LPCB/VdS).
- Unique ‘Plug & Play’ installation concept.
- Supplied with a non-breaking plastic resettable element.
- Includes a 470Ω resistor, test key and red back box.
- Anti-Tamper facility.
- Flush version (without a red back box) also available (order code BF370MFR).
