A fire alarm system notifies us of an emergency, to take action to protect ourselves, our employees, and the general public.
Fire detection systems identify fire early when there is still enough time for inhabitants to safely evacuate. Control actions begin while the fire is still minor, early detection helps to reduce property loss and operational disruption. Fire alarm systems transmit information about the location of the fire to emergency responders, speeding up the firefighting procedure.
Sounders go off to warn those within the building that there may be a fire. The fire alarm system could include a remote signal system. It would then notify the fire department via a central station.
- You cannot add that amount of "Zeta Infinity 8 Conventional 1 Zone Fire Alarm Panel IN1" to the cart because there is not enough stock (0 remaining).
-
C-TEC CFP AlarmSense 8 Zone Two-Wire Fire Alarm Panel
-
Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB).
-
Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
-
Manufactured by C-TEC in the UK.
-
Eight AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points, sounders and visual indicators.
-
Four conventional sounder circuits.
-
Integral 1.5A EN54-4/A2 compliant switch mode PSU.
-
Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
-
Two on-board relays (Fire and Fault).
-
Two open-collector outputs (Remote and Reset).
-
‘Class change’ and alert inputs.
-
Installer-friendly design.
-
Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
-
Low 25mA quiescent current.
-
Multiple indicators.
-
System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system).
-
Space for two x 12V 3.3Ah VRLA batteries.
₦ 295,000.00₦ 300,000.00C-TEC CFP AlarmSense 8 Zone Two-Wire Fire Alarm Panel
₦ 295,000.00₦ 300,000.00 -
-
C-TEC CFP 8 Zone Repeater Panel Part No. CFP760
-
-
Can be used to repeat the functions of a master CFP standard or AlarmSense 2-8 zone fire panel at remote parts of site (e.g. all potential fire service entrances).
-
Up to 8 repeaters per CFP master.
-
Includes its own Mains power supply that requires its own standby battery supply.
-
Provides the user with access to all AL1 and AL2 functions.
-
Master/Repeater communication achieved using CFP761 network driver cards (one CFP761 is supplied with the Repeater, an additional CF761 card is required at the master CFP).
-
Communicates over screened two-wire fire resistant cable.
-
Total repeater network cable length should not exceed 1KM.
-
Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
-
₦ 295,000.00₦ 300,000.00C-TEC CFP 8 Zone Repeater Panel Part No. CFP760
₦ 295,000.00₦ 300,000.00 -
-
Gent VS-CABLE-24 Replacement Ribbon Cables for VIGPLUS-24 and VIGPLUS-72 Panel
Gent VS-CABLE-24 Replacement Ribbon Cables for VIGPLUS-24 and VIGPLUS-72 Panel
The VS-CABLE-24 is replacement Ribbon Cables for the VIGPLUS-24 and VIGPLUS-72 Panels.
₦ 299,500.00₦ 320,000.00Gent VS-CABLE-24 Replacement Ribbon Cables for VIGPLUS-24 and VIGPLUS-72 Panel
₦ 299,500.00₦ 320,000.00 -
C-TEC Flushing Mount Remote Status Unit Part No. EP210F
-
-
-
-
Designed to connect to the RS485 terminals on an EP203 Automatic Extinguisher Panel to provide remote system status indication via a 128 x 64 pixel LCD status display.
-
Also includes a pull-down manual release button, a mode (auto/manual) keyswitch and a wide range of system status indicators.
-
Three monitored input connections (Hold, Abort and Mode).
-
Max. 8 remote status units per EP203 panel.
-
Surface remote status units (EP210S) and weather proof enclosures (BF359/1) also available.
-
-
-
₦ 300,000.00₦ 320,000.00C-TEC Flushing Mount Remote Status Unit Part No. EP210F
₦ 300,000.00₦ 320,000.00 -
-
Zeta Infinity 8 Conventional 1 Zone Fire Alarm Panel IN1
✅ Key Advantages:
-
🔒 Single-Zone Monitoring: Ideal for focused protection in compact facilities, offices, shops, or residential complexes.
-
⚡ Quick Response System: Delivers real-time fire alerts for faster evacuation and emergency action.
-
🔧 User-Friendly Interface: Easy to install, operate, and maintain — no tech stress!
-
🔌 Compatibility: Works seamlessly with most conventional fire detectors and call points.
-
🛡️ Built to Last: Robust, durable design backed by Zeta’s trusted quality.
-
🧯 Cost-Effective Safety: High-performance fire protection at an affordable price.
🔗 Secure your building today with reliable fire detection.
🛒 Available now at Trends Ventures Limited.₦ 308,700.00₦ 309,700.00Zeta Infinity 8 Conventional 1 Zone Fire Alarm Panel IN1
₦ 308,700.00₦ 309,700.00 -
-
Zeta 1 Zone Panel
🔧 Key Features:
-
Single Zone Monitoring: Supports one detection zone, perfect for focused fire protection in small areas.
-
LED Indicators: Clear visual alerts for fire, fault, power, and system status.
-
Sounder Circuit: Integrated sounder output for activating alarms or sirens.
-
Battery Backup Compatible: Ensures system continues operating during power outages.
-
User-Friendly Interface: Simple controls for easy operation and quick system resets.
✅ Benefits:
-
Affordable Fire Safety: A budget-friendly choice without compromising reliability.
-
Quick Installation: Minimal wiring and intuitive setup for faster deployment.
-
Compliance: Meets industry safety standards for peace of mind.
₦ 318,150.00₦ 333,300.00Zeta 1 Zone Panel
₦ 318,150.00₦ 333,300.00 -
-
Zeta Smart Circuit Module Fire Alarm System Components
Key Features:
-
Intelligent addressable circuit monitoring and control
-
Compatible with Zeta fire alarm panels
-
Supports various output devices (sounders, relays, etc.)
-
Compact design for easy installation
-
LED status indicators for diagnostics
₦ 332,850.00₦ 348,700.00Zeta Smart Circuit Module Fire Alarm System Components
₦ 332,850.00₦ 348,700.00 -
-
Gent 4CH Interface S4-3440-02 Panel
Key Features:
-
🔹 4 Independent Channels: Supports multiple inputs or outputs for diverse device integration.
-
🔹 Fully Addressable: Compatible with Gent’s Vigilon loop, ensuring intelligent communication.
-
🔹 Flexible Configuration: Easily programmable for various monitoring and control applications.
-
🔹 Compact & Durable Design: Built to meet demanding safety standards for commercial and industrial environments.
-
🔹 Status Indicators: Clear LED indicators for real-time channel status updates.
₦ 336,000.00₦ 352,000.00Gent 4CH Interface S4-3440-02 Panel
₦ 336,000.00₦ 352,000.00 -
-
CTEC 8 Zone Plastic Fire Alarm Panel
✅ 8-Zone Capacity for flexible coverage
✅ Durable Plastic Housing for lightweight installation
✅ User-Friendly Interface for quick diagnostics and control
✅ Compatible with Conventional Fire Detectors & Call PointsIdeal for offices, shops, schools, and residential complexes, this panel offers robust performance while meeting fire safety standards.
₦ 337,050.00₦ 353,100.00CTEC 8 Zone Plastic Fire Alarm Panel
₦ 337,050.00₦ 353,100.00 -
🔥 CTEC Extinguishing Remote Indicator Status Unit – Precision Fire Safety Monitoring🔥
✅ Key Functions & Features:
-
Real-time status indication of fire suppression systems
-
Clear LED display for Activation, Fault, and Power status
-
Compatible with CTEC fire suppression and extinguishing systems
-
Surface or flush-mounted installation options
-
Designed for reliable operation in critical environments
-
Enables faster response times during emergencies
📦 Now Available at Trends Ventures Limited
🛠️ Quality Assured | 💡 Easy Installation | 🚚 Fast Nationwide Delivery₦ 337,050.00₦ 353,100.00🔥 CTEC Extinguishing Remote Indicator Status Unit – Precision Fire Safety Monitoring🔥
₦ 337,050.00₦ 353,100.00 -
-
CTEC 8 Zone Repeater Panel – fire alarm
✅ Key Features:
-
Supports up to 8 fire alarm zones
-
LED indicators for fire and fault conditions
-
Compatible with CTEC CFP and other conventional fire panels
-
Surface or flush mount installation
-
Ideal for hotels, schools, offices, and industrial settings
📦 Whether you’re expanding your fire alarm network or need remote access in large facilities, the CTEC 8 Zone Repeater Panel delivers unmatched peace of mind and compliance.
₦ 337,575.00₦ 353,650.00CTEC 8 Zone Repeater Panel – fire alarm
₦ 337,575.00₦ 353,650.00 -
-
Zeta Infinity 8 Conventional 2 Zone Fire Alarm Panel IN2
🔒 Advantages:
-
✅ Supports up to 2 detection zones – ideal for compartmentalized monitoring
-
✅ LED indicators for instant status updates
-
✅ Easy installation and intuitive user interface
-
✅ Compatible with a wide range of conventional detectors and devices
-
✅ Built-in fault monitoring and zone isolation functions
-
✅ Compact, sleek design fits any control room or wall space
-
✅ Manufactured by Zeta Alarm Systems – trusted worldwide
Perfect for schools, small offices, retail spaces, and more.
🛒 Get protected today — choose smart, choose Zeta Infinity 8.
₦ 362,775.00₦ 370,000.00Zeta Infinity 8 Conventional 2 Zone Fire Alarm Panel IN2
₦ 362,775.00₦ 370,000.00 -










